Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Magnetizing Curve Estimation of Induction Motors in Single-Phase Magnetization Mode Considering Differential Inductance Effect

Parameters Estimation for Multiphase Induction Machine with Concentrated Windings Through Finite Element Method

Magnetizing Curve Identification for Induction Motors at Standstill Without Assumption of Analytical Curve Functions

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Computation of Permanent Magnet Brushless DC Motor Design Allowing for Inductance

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Estimation of saturation characteristic of induction motors by injecting sinusoidal currents with customized low frequency

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity

Diagnosis of Air‐gap Eccentricity and Partial Demagnetisation of an Interior Permanent Magnet Synchronous Motor Based on Inverse Transient Complex Inductance Vector Theory

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

A Method Based on Measured Boundary Conditions for Reconstructing the Magnetic Field Distribution of an Electromagnetic Mechatronic System

Armature Inductance Measurement of Permanent Magnet Synchronous Linear Motor

Air-gap and Yoke Flux Density Optimization for Multiphase Induction Motor Based on Novel Harmonic Current Injection Method

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Adaptive Flux Estimation and Parameters Identification of Induction Motors Based on Model Reference Approach

Magnetic Analysis and Design Method for Solid Rotor Induction Motors Based on Directly Coupled Field-Circuit

Online Identification Strategy of Secondary Time Constant and Magnetizing Inductance for Linear Induction Motors

Online Inductance Identification of Permanent Magnet Synchronous Motors Independent of Rotor Position Information

Analysis of Inductance Variation in Permanent Magnet Linear Synchronous Motor

Magnetic field analysis of a hybrid excitation multi-degree-of-freedom spherical motor