Abstract:Due to the unique spiral geometry, different functional helical fibers are fabricated to perform vital tasks, including cargo transportation, medical treatment, cell manipulation, and so on. Although microfluidic techniques are widely used to fabricate helical fibers, the problems of channel blockage and spinning instability have not been well solved, which limits the mass preparation and practical application of spiral microfibers. In addition, the spinning mechanism is simply limited to liquid rope coiling, which has little impact on the design of microfluidic devices. Here, new types of microfluidic devices, which were easy to make and exhibited excellent spiral spinning performance, were designed. It was found that adding a sleeve layer outside the inner core needle in a coaxial microfluidic device could effectively promote the stable formation of helical microfibers. This novel microchannel could fabricate helical microfibers of more than 100 m in length continuously at one time with almost no blockage or deformation, and the key parameters of the fibers could be precisely adjusted. Combined with micro-particle image velocimetry (micro-PIV) measurements, it was confirmed that the improvement in the spinning performances was mainly attributed to the emergence of a focusing flow in the presence of the sleeve layer. After loading magnetic nanoparticles, the helical microfibers exhibited excellent motion manipulation capabilities, which showed great potential for drug delivery, cargo transportation, clogging removal, etc. This new design not only realized the high-throughput fabrication of helical microfibers but also provided deeper insights into the underlying mechanisms of spiral generation and new ideas for the design of microfluidic devices.

BioMimic Fabrication of Electrospun Nanofibers with High-Throughput

Large‐Scale Fabrication of Bioinspired Fibers for Directional Water Collection

Functional Fibers with Unique Wettability Inspired by Spider Silks

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Polymorphic Regenerated Silk Fibers Assembled Through Bioinspired Spinning

Biomimetic Nanofibrillation in Two-Component Biopolymer Blends with Structural Analogs to Spider Silk.

Biomimicry Via Electrospinning

Biomimetic Nanofiber Patterns with Controlled Wettability

Mass production of high-quality nanofibers via constructing pre-Taylor cones with high curvature on needleless electrospinning

Overexpressed Artificial Spidroin Based Microneedle Spinneret for 3D Air Spinning of Hybrid Spider Silk

Bioinspired Materials: Controlled Fabrication and Water Collection Ability of Bioinspired Artificial Spider Silks (adv. Mater. 32/2011)

Recombinant spider silk from aqueous solutions via a bio-inspired microfluidic chip

One-Step Microfluidic Fabrication of Bioinspired Microfibers with a Spindle-Knot Structure for Fog Harvest

Mechanically Strong Proteinaceous Fibers: Engineered Fabrication by Microfluidics

Biomimetic Microadhesion Guided Instant Spinning

Establishing superfine nanofibrils for robust polyelectrolyte artificial spider silk and powerful artificial muscles

Fabrication of electrostatic-induction-assisted solution blowing spinning nanofibers and its mechanism

Controllable Generation of Nanofibers Through a Magnetic-Field-assisted Electrospinning Design

Electrospinning Nanofibers

High-Throughput and Controllable Fabrication of Helical Microfibers by Hydrodynamically Focusing Flow.

Free Liquid Surface Electrospinning Using a Spiral Tip for Large-Scale Nanofiber Production