Abstract:In this paper, C9 petroleum resin was used as the raw material, and the microstructure of C9/SBS modified asphalt at a different time under different C9 petroleum resin content was studied by fluorescence microscope. The mechanical properties were studied by using the whole section fracture energy, the pavement performance of C9/SBS modified asphalt was tested and analyzed. The results show that C9 petroleum resin is conducive to SBS particles being sheared into smaller particles under the same preparation process. The larger the content of C9 petroleum resin, the smaller the final size of SBS particles, and the smallest SBS particle size can be reduced by about half. When the content of C9 petroleum resin is more than 9%, the decreasing trend is no longer obvious. This phenomenon mainly occurs in the final stage of shearing. C9 petroleum resin can affect the swelling behaviour of SBS in asphalt and its final microstructure by reducing the particle size of SBS. The larger the content of C9 petroleum resin, the larger the area occupied by SBS after swelling, and the longer the skeleton length of SBS, the easier the crosslinking occurs and the denser the crosslinking network structure is formed. The addition of C9 petroleum resin can effectively improve the fracture energy density of SBS modified asphalt, and its mechanism is closely related to the effect of C9 petroleum resin on the shear particle size and final swelling degree of SBS particles. C9 petroleum resin can effectively hinder the floating and aggregation of SBS modifier in asphalt during high-temperature storage, thus improving the storage stability of SBS modified asphalt. The incorporation of C9 petroleum resin can significantly increase the viscosity of SBS modified asphalt, improve the low-temperature performance of SBS modified asphalt, and improve the anti-ageing performance of SBS modified asphalt. The results provide a new way to improve the performances of SBS modified asphalt.

Study and Analysis on the Modification and Improvement of Asphalt Mixture Performance after Appending Polymer Fibers

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Experimental investigation on the effects of a new anti-stripping additive on performance properties of asphalt and its mixtures

Study on Percolation Phenomena and Mechanism of Enhanced Asphalt by Polymers

Mechanistic Study on the Optimization of Asphalt-Based Material Properties by Physicochemical Interaction and Synergistic Modification of Molecular Structure

Modification and Enhancing Contribution of Fiber to Asphalt Binders and Their Corresponding Mixtures: A Study of Viscoelastic Properties

Research and application of the polymer which are directly added to modify the hot mix asphalt

Study on the Performance of Polyester Fiber Modified Asphalt Mastic

A Review of Polymer-Modified Asphalt Binder: Modification Mechanisms and Mechanical Properties

Properties of polymer modified asphalt by polyphosphoric acid through molecular dynamics simulation and experimental analysis

Unraveling the influence of fibers on aging susceptibility and performance of high content polymer modified asphalt mixtures

Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance

Comparative Study on the Properties of Different Fiber-modified Asphalts

Effect of different fibers on the properties of asphalt mastics

Experimental study of fibers in stabilizing and reinforcing asphalt binder

Research on the Rheological Properties and Modification Mechanism of Epoxy Resin/SBS Composite-Modified Asphalt

Effect of Phenolic Resin on the Rheological and Morphological Characteristics of Styrene-Butadiene Rubber-Modified Asphalt

A Study on Effect of Organic Compound Addition Agent on Properties of Asphalt

Investigation of rheological properties and modification mechanism of SBS-modified asphalt with different warm mix additives

Evaluation and Design of Fiber-Reinforced Asphalt Mixtures

Modification mechanism of C9 petroleum resin and its influence on SBS modified asphalt