Abstract:This paper investigates the use of fractional-slot concentrated windings (FSCWs) in large-scale (MW level) offshore wind generators. It focuses specifically on a power rating of 3 MW and uses an existing direct-drive synchronous PM machine (DD-SPM) with 480s/160p and dual three-phase integer-slot winding (ISW) as a baseline. A multiple of the common 12s/10p FSCW machine is used that matches the electrical frequency of the ISW machine, yielding a 192s/160p dual three-phase machine. The hybrid star–delta connection has grown increasingly popular owing to its unique harmonic cancellation properties, which can help reduce rotor and PM eddy current losses in FSCW machines. In this paper, two dual three-phase star–delta-wound machines are scaled to 3 MW and included in the investigation. Specifically, a 384s/160p dual three-phase and dual star–delta winding machine, which is a multiplication of the 24s/10p machine, and a 192s/176p dual three-phase and dual star–delta winding machine, which is a multiplication of the 24s/22p machine, are used. These machines are investigated using finite element analysis (FEA) and compared on the basis of their air-gap flux density harmonics, open-circuit electro-motive force (EMF), torque performance, and losses and power. It is found that the proposed 384s/160p dual star–delta winding machine has the best electromagnetic performance of all, with a stator power that is 1.2% greater than that of the baseline ISW machine. However, this machine has a coil pitch of 2 and so loses the manufacturing and fault-tolerant advantage of having concentrated windings. If concentrated windings are desired, then the proposed 192s/176p dual star–delta winding machine is the best choice, with the stator power only 2.6% less than that of the baseline ISW machine, but unfortunately still has significant rotor and PM eddy current losses.

Comparaison De Performances De Différentes Structures De Machines Synchrones À Aimants Permanents (MSAP) Polyphasées En Mode Normal Et En Modes Dégradés En Vitesse Variable Avec Défluxage Pour Des Applications Hydroliennes

Comparative Study of Flux-Switching PM and EE Machines with Dual Armature Winding Configuration

Comparison of Dual 3-Phase Modular Permanent Magnet Machines with Overlapping/Non-overlapping Windings and Redundancy

Design Optimisation And Performance Investigation Of Novel Dual Three-Phase Permanent-Magnet Linear Synchronous Machines For A Ropeless Elevator Systeminspec Keywordsother Keywords

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Comparison of electromagnetic performance of 2- and 3-phase PM brushless AC machines for low speed applications

Comparative Study of Modular Dual 3-phase Permanent Magnet Machines with Overlapping/Non-overlapping Windings

Performance Analysis of Tubular Partitioned Stator Flux-Reversal Linear Machine with Different Slot/Pole Combinations and Winding Structures

M{é}thodologie de dimensionnement par optimisation bay{é}sienne d'une machine synchro-r{é}luctante assist{é}e d'aimants permanents

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Optimization and performance of linear PM-assisted reluctance synchronous machine for wave energy generation

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

Design and Tests of a Marine Current Turbine in Low Flow Velocity

A Novel Structure of Doubly Salient Permanent Magnet Machine

Design and Optimization of a Five-Phase Permanent Magnet Synchronous Machine Exploiting the Fundamental and Third Harmonic

Design and Optimization of Synchronous Motor Using PM Halbach Arrays for Rim-Driven Counter-Rotating Pump

Analysis of MW-Level Offshore Wind Turbine Generators with Dual Star–Delta Fractional-Slot Windings

Permanent Magnet Vernier Machines for Direct-Drive Offshore Wind Power: Benefits and Challenges

The Electromagnetic Propeller Based on a Five-Phase Fault-Tolerant Permanent-Magnet Machine

Comparative Study of Novel Dual Winding Dual Magnet Flux Modulated Machines with Different Stator/Rotor Pole Combinations