Abstract:Dynamics modeling plays an important role in the application of agricultural robots, which is the key to analyze the dynamic characteristics and achieve high-precision operation. This paper addressed the issue of deriving the dynamic formulation of a novel 3-DOF redundantly actuated parallel mechanism. The structure of the parallel mechanism is composed of a moving platform attached to a fixed platform through two identical PRRR kinematic chains and one PPRR chain. The parallel mechanism has two translational degrees and one rotational degree. Firstly, inverse kinematic solution of the parallel mechanism was studied by analyzing the structure property and the constraint equation; Secondly, according to the kinematics of the redundant mechanism and considering fully the impact of inertial force for each component, the inverse dynamic equation was formulated in the task space by using the Lagrangian formalism, and the driving force was optimized by utilizing the minimal 2-norm method. By investigating the contribution of each term in the dynamic model to the driving force, a simplified strategy of the dynamic model for real-time control application was proposed. Simulation and experimental results showed that the maximal value of the driving force for the parallel mechanism without actuation redundancy was 15N, but that of mechanism with actuation redundancy was 10N and the driving force peak was reduced by 33%. It is noted that the point β=57.6460° was the singularity which should be avoided in practical application. Additionally, the maximal tracking errors for the end-effector were 0.8mm, 0.6mm and 0.068° in Y, Z and β direction, respectively. Thus the parallel mechanism system based on the proposed dynamic model can achieve good tracking performance. This research provides technology reference for further study of high precision real-time control of parallel mechanism.

Inverse Kinematics and Dynamics of a Spraying Robot

Kinematics Modeling and Analysis of a Novel Five-DoF Spraying Robot

Optimal Design of the Three-Degree-of-Freedom Parallel Manipulator in a Spray-Painting Equipment.

Workspace and Dynamic Performance Evaluation of the Parallel Manipulators in A Spray-Painting Equipment

Position, Singularity and Workspace Analysis of 3-Psr-o Spatial Parallel Manipulator

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Multi-objective optimal design of a novel 6-DOF spray-painting robot

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Dynamics modeling and experiments of 3-DOF parallel mechanism with actuation redundancy

Kinematics and Inverse Dynamics Analysis for a Novel 3-PUU Parallel Mechanism.

A Study on the Dynamics of a Novel Seven Degrees of Freedom Spray-Painting Robot with a Telescopic Forearm

Kinematics and workspace analysis of 4SPRR-SPR parallel robots

Kinematic optimal design of a 2-degree-of-freedom 3-parallelogram planar parallel manipulator

Inverse Kinematics of a 7-DOF Spraying Robot with 4R 3-DOF Non-spherical Wrist

Inverse Kinematics of a 7-DOF Spray-Painting Robot with a Telescopic Forearm

A Novel Spray Painting Robotic Device for the Coating Process in Automotive Industry

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Iterative Compensation Control of 3-DOF Rotational Parallel Mechanism Based on Forward Kinematics

A new 3-DOF 2T1R parallel mechanism: Topology design and kinematics

Decoupling Dynamic Analysis Of A Three-Parallelogram Hybrid Spray-Painting Robot

Kinematics Analysis Of A 3-Dof Rotational Parallel Mechanism