Abstract:The use of a tuning fork resonator as sensitive element of a gyroscopic sensor has some advantages in comparison with other types of the resonators. For instance, it allows to compensate lateral accelerations in the direction perpendicular to the axis of rotation. At the same time, the task of accurate determination of the carrying frequency of the primary mode of a non-moving tuning fork is of great importance. Thus, in [1] the analysis of vibrations of a gyroscope is built on the evaluation of the first frequency of flexure vibrations of Timoshenko's beam with one rigidly fixed end [2]. As a result, the sensing frequencies of the Bryan's splitting pair [3] of the fork lie below the frequency of Timoshenko's beam, and the resonant frequency of the non-moving tuning fork remained uncertain. The purpose of a present paper is to establish this frequency. In the statement of a problem, concerning real geometric dimensions of the tuning fork elements, we assume that the length of the tuning fork rods l is much more then the radius of the base r: r/l << 1. Then, frequencies of the flexure vibrations of the half-ring lie much higher than the frequencies of the bending vibrations of the rods. It allows us to give a solution for the base in a quasi-static approximation, and to take into account the dynamics of the tuning fork in the solution for bimorph piezoceramic rods. Conditions of coupling between the rods and the half-ring are reduced to the conditions of elastic fixing of the rods, which take into account the geometric parameters r and l.

Analysis and Control for Quartz Tuning Fork Gyroscope at the Best Resonance Frequency

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

One-time Frequency Sweep to Eliminate IQ Coupling in MEMS Vibratory Gyroscopes

Analysis on Digital Automatic Gain Control of MEMS Gyro Driven-Loop Circuit

Noise Analysis and Modeling for a Digital Control Architecture for Lissajous Frequency-Modulated MEMS Gyroscope with Amplitude-Modulated Readout

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Optimization Of Frequency Stabilization Loop For Resonator Fiber Optic Gyro

Signal Demodulation Principle for Quartz Tuning Fork Gyroscope and Extracting Algorithm for Angular Rate Signal

Precision Analysis of Frequency Lock-in Technique in Resonator Micro Optic Gyroscope

Analysis and Design of Drive Closed-Loop for Mems Vibratory Gyroscope

Frequency Tuning Control for the Drive Mode of a Bulk Z-axis Micro-machined Gyroscope

Design of A Tuning-Fork Gyro Made of Quartz

Frequency Locking Technique in Digital Closed-Loop Resonator Fiber Optic Gyro

Study on electrostatic self-excited driving for tuning fork micromachined gyroscope with large Q value

Research on the Resonant Frequency of MEMS Gyroscopes under Varying Tuning Voltage.

Analysis and design of a 3rd order velocity-controlled closed-loop for MEMS vibratory gyroscopes

A Novel Tracking Control Approach of Amplitude Signals for Vibratory Gyroscopes Suppressing High-Frequency Disturbance

Determination of parameters of the primary mode of the tunung fork type solid-state gyroscope

A Novel Mechanical Frequency Tuning Method Based on Mass-Stiffness Decoupling for MEMS Gyroscopes

Development of V-Shaped Beam on the Shock Resistance and Driving Frequency of Micro Quartz Tuning Forks Resonant Gyroscope