The Multivariate Linear Profile Control Chart

Zhiming Xia

2013-01-01

Abstract:In order to general the monitoring of the linear Profile,the paper maks a statistics based on multivariate linear Profile.The distribution of the statistic is improved to be the normal distribution,and the form of the average run length is also obtained through Markov chain.

What problem does this paper attempt to address?

Monitoring of Linear Profiles Using Linear Mixed Model in the Presence of Measurement Errors

Wenhui Liu,Zhonghua Li,Zhaojun Wang

DOI: https://doi.org/10.3390/math10244641

IF: 2.4

2022-01-01

Mathematics

Abstract:In the application of control charts, most of the research in profile monitoring is based on accurate measurements. Measurement errors, however, often exist in many manufacturing and service environments. In this paper, we apply linear mixed models in the presence of measurement errors in fixed effects. We discuss three modified multivariate charts, namely Hotelling’s T2, multivariate exponential weighted moving average (MEWMA) control chart, and multivariate cumulative sum (MCUSUM) control chart. Performance comparisons are made in terms of the average run length (ARL) and average extra quadratic loss (AEQL). Finally, a real data example on healthcare expenditures is used to illustrate the implementation of the proposed monitoring schemes.
Control chart for monitoring multivariate COM-Poisson attributes

Aamir Saghir,Zhengyan Lin

DOI: https://doi.org/10.1080/02664763.2013.838666

IF: 1.416

2014-01-01

Journal of Applied Statistics

Abstract:Statistical process control of multi-attribute count data has received much attention with modern data-acquisition equipment and online computers. The multivariate Poisson distribution is often used to monitor multivariate attributes count data. However, little work has been done so far on under- or over-dispersed multivariate count data, which is common in many industrial processes, with positive or negative correlation. In this study, a Shewhart-type multivariate control chart is constructed to monitor such kind of data, namely the multivariate COM-Poisson (MCP) chart, based on the MCP distribution. The performance of the MCP chart is evaluated by the average run length in simulation. The proposed chart generalizes some existing multivariate attribute charts as its special cases. A real-life bivariate process and a simulated trivariate Poisson process are used to illustrate the application of the MCP chart.
On the Monitoring of Linear Profiles

Keunpyo Kim,Mahmoud A. Mahmoud,William H. Woodall

DOI: https://doi.org/10.1080/00224065.2003.11980225

IF: 2.182

2003-07-01

Journal of Quality Technology

Abstract:We propose control chart methods for process monitoring when the quality of a process or product is characterized by a linear function. In the historical analysis of Phase I data, we recommend methods including the use of a bivariate T2 chart to check for stability of the regression coefficients in conjunction with a univariate Shewhart chart to check for stability of the variation about the regression line. We recommend the use of three univariate control charts in Phase II. These three charts are used to monitor the 𝘠-intercept, the slope, and the variance of the deviations about the regression line, respectively. A simulation study shows that this type of Phase II method can detect sustained shifts in the parameters better than competing methods in terms of average run length performance. We also relate the monitoring of linear profiles to the control charting of regression-adjusted variables and other methods.

engineering, industrial,operations research & management science,statistics & probability
Profile control chart based on maximum entropy

Seyedeh Azadeh Fallah Mortezanejad,Ruochen Wang,Gholamreza Mohtashami Borzadaran,Renkai Ding,Kim Phuc Tran

DOI: https://doi.org/10.48550/arXiv.2012.14289

2023-11-01

Abstract:Monitoring a process over time is so important in manufacturing processes to reduce the waste of money and time. Some charts as Shewhart, CUSUM, and EWMA are common to monitor a process with a single intended attribute which is used in different kinds of processes with various ranges of shifts. In some cases, the process quality is characterized by different types of profiles. The purpose of this article is to monitor profile coefficients instead of a process mean. In this paper, two methods are proposed for monitoring the intercept and slope of the simple linear profile, simultaneously. In this regard, two methods are compared here. The first one is the linear regression, and the one is the maximum entropy principle. The T2 Hotelling statistics is used to transfer two coefficients to a scalar. A simulation study is applied to compare the two methods in terms of the second type of error and average run length. Finally, two real examples are presented to demonstrate the applicability of the proposed chart. The first one is about semiconductors, and the second one is about pharmaceutical production processes. The performance of the methods is relatively similar. The maximum entropy plays an important role in correctly identifying differences in the pharmaceutical example, while linear regression did not correctly detect these changes.

Applications
A Self-Starting Control Chart for Linear Profiles

Changliang Zou,Chunguang Zhou,Zhaojun Wang

DOI: https://doi.org/10.1080/00224065.2007.11917702

IF: 2.182

2007-01-01

Journal of Quality Technology

Abstract:A self-starting control chart based on recursive residuals is proposed for monitoring linear profiles when the nominal values of the process parameters are unknown. This chart can detect a shift in the intercept, the slope, or the standard deviation. Because of the good properties of the plot statistics, the proposed chart can be easily designed to match any desired in-control average run length. Simulated results show that our approach has good charting performance across a range of possible shifts when the process parameters are unknown and that it is particularly useful during the start-up stage of a process.
A control chart for monitoring linear circular-circular profile

Yang Zhang,Zhen He,Min Zhang

DOI: https://doi.org/10.1109/ICBMEI.2011.5920424

2011-01-01

Abstract:Circular random variables arise from a variety of sources in our daily lives, for example the wind directions. The ordinary linear circular regression is the simple profile, but it occurs frequently, particularly in calibration problems. An F control chart is proposed for monitoring the parameters of the linear circular-circular profile simultaneously in Phase II, and a control scheme is developed for Phase I. Simulation study illustrates that our proposed control chart performs well.
Control Chart Based On Likelihood Ratio For Monitoring Linear Profiles

Jiujun Zhang,Zhonghua Li,Zhaojun Wang

DOI: https://doi.org/10.1016/j.csda.2008.12.002

IF: 2.035

2009-01-01

Computational Statistics & Data Analysis

Abstract:A control chart based on the likelihood ratio is proposed for monitoring the linear profiles. The new chart which integrates the EWMA procedure can detect shifts in either the intercept or the slope or the standard deviation, or simultaneously by a single chart which is different from other control charts in literature for linear profiles. The results by Monte Carlo simulation show that our approach has good performance across a wide range of possible shifts. We show that the new method has competitive performance relative to other methods in literature in terms of ARL, and another feature of the new chart is that it can be easily designed. The application of our proposed method is illustrated by a real data example from an optical imaging system. (C) 2008 Elsevier B.V. All rights reserved.
Developing Machine Learning-based Control Charts for Monitoring Different GLM-type Profiles With Different Link Functions

Patrik Hric,Hamed Sabahno

DOI: https://doi.org/10.1080/08839514.2024.2362511

IF: 2.777

2024-06-07

Applied Artificial Intelligence

Abstract:In certain situations, the quality of a process is determined by dependent variables in relation to independent variables, often modeled through a regression framework referred to as a profile. The practice of monitoring and preserving this relationship is known as profile monitoring. In this paper, we propose an innovative approach that uses different machine-learning (ML) techniques for constructing control charts and monitoring generalized linear model (GLM) profiles with three different GLM-type response distributions of Binomial, Poisson, and Gamma, and by examining different link functions for each response distribution. Through our simulation study, we undertake a comparative analysis of different training methods. We measure the charts' performance using the average run length, which signifies the average number of samples taken before observing a data point that exceeds the predefined control limits. The result shows that the selection of ML control charts is contingent on the response distribution and link function, and depends on the shift sizes in the process and the utilized training method. To illustrate the practical application of the proposed ML control charts, we present two real-world cases as examples: a drug–response study and a volcano-eruption study, to demonstrate how each ML chart can be implemented in practice.

computer science, artificial intelligence,engineering, electrical & electronic
Optimization of monitoring rules for multivariate pre-control charts

HOU Zhi,YU Zhong-hua

DOI: https://doi.org/10.3969/j.issn.1001-3997.2012.03.099

2012-01-01

Abstract:Multivariate pre-control chart extends monitoring variable from one variant to multiple,which is an effective method to analyze and monitor two or more quality characteristics,and an important tool to control product quality of production process as well.However,problems are available such as low precision and low monitoring efficiency.On the basis of pre-control chart,in order to reduce the risk of false-judgment,sampling amount has been increased from 5 to 10 in accordance with probability increased by every additional sample,and monitoring rules has been adjusted from 4 to 6 based on new sampling amount.With average run length(AVL)as standard,the effect of new and old monitoring rules has been compared and then the best one could be obtained,which has promoted the monitoring precision and efficiency of Multivariate pre-control chart.
On Median Control Charting Under Double Sampling Scheme

Shabbir Ahmad,Muhammad Riaz,Saddam Akber Abbasi,Zhengyan Lin

DOI: https://doi.org/10.1504/EJIE.2014.064755

2014-01-01

European Journal of Industrial Engineering

Abstract:Standard Shewhart control charts are often based on the assumption that the observations follow a specific parametric distribution, such as the normal, and outlier-free samples are initially selected to construct control limits for future monitoring of process parameters, e. g., location, dispersion, etc. The median is a popular measure of location which is more robust than mean for heavily skewed distributions. In ideal circumstances (where all the underlying assumptions such as normality and independence are met), the median chart is shown to be less efficient that the mean chart. To overcome the efficiency loss of the median chart, this study presents a set of auxiliary information-based median type Shewhart charts based on parent normal, t and gamma distributed process environments under double sampling scheme. The performance of these charts is evaluated in terms of run length (RL) characteristics such as: average run length (ARL), median run length (MDRL), standard deviation of the run length distribution (SDRL), extra quadratic loss (EQL) and relative ARL (RARL). Moreover, the effects of Step 1 sample size and contaminated environments are examined on the ARL performance of different median-based charting structures, under double sampling scheme. Illustrative examples are also provided to explain the working of the said charts.
Zone Control Charts With Estimated Parameters For Detecting Prespecified Changes In Linear Profiles

Yang Zhang,Yanfen Shang,Min Zhang,Xiaofang Wu

DOI: https://doi.org/10.1080/03610918.2017.1359288

2018-01-01

Communications in Statistics - Simulation and Computation

Abstract:In profile monitoring, control charts are proposed to detect unanticipated changes, and it is usually assumed that the in-control parameters are known. However, due to the characteristics of a system or process, the prespecified changes would appear in the process. Moreover, in most applications, the in-control parameters are usually unknown. To overcome these issues, we develop the zone control charts with estimated parameters to detect small shifts of these prespecified changes. The effects of estimation error have been investigated on the performance of the proposed charts. To account for the practitioner-to-practitioner variability, the expected average run length (ARL) and the standard deviation of the average run length (SDARL) is used as the performance metrics. Our results show that the estimation error results in the significant variation in the ARL distribution. Furthermore, in order to adequately reduce the variability, more phase I samples are required in terms of the SDARL metric than that in terms of the expected ARL metric. In addition, more observations on each sampled profile are suggested to improve the charts' performance, especially for small phase I sample sizes. Finally, an illustrative example is given to show the performance of the proposed zone control charts.
Control Charts for Monitoring Linear Profiles with Within‐Profile Correlation Using Gaussian Process Models

W. Woodall,Yang Zhang,Chi Zhang,Zhen He

DOI: https://doi.org/10.1002/qre.1502

2014-06-01

Quality and Reliability Engineering International

Abstract:Profile monitoring is the utilization of control charts for checking the stability of the quality of a product over time when the product quality is characterized by a function at each time point. Most existing control charts for monitoring profiles are based on the assumption that the observations within each profile are independent of each other, which is often invalid in practice. Successive measurements within profiles often exhibit spatial or serial correlation. This paper focuses on Phase II linear profile monitoring when within‐profile data are correlated. A Gaussian process model is used to describe the within‐profile correlation (WPC). Two Shewhart‐type multivariate control charts are proposed to monitor the linear trend term and the WPC separately in Phase II. Our proposed approaches are compared with alternative methods through numerical simulations in which different in‐control WPCs are considered. Simulation studies show that the proposed control charts are sensitive to changes in the linear trend term when the correlation is strong and effective in detecting large shifts in the WPC. Finally, an example is given to illustrate the implementation of our proposed control charts. Copyright © 2013 John Wiley & Sons, Ltd.

Engineering,Computer Science
A Multivariate Non-Parametric Control Chart Based on Run Test.

Yanting Li,Dezhao Pei,Zhenyu Wu

DOI: https://doi.org/10.1016/j.cie.2020.106839

IF: 7.18

2020-01-01

Computers & Industrial Engineering

Abstract:Multivariate control charts have a wide range of applications in the field of quality management. This paper proposes a new multivariate non-parametric control chart based on run test. First, the shortest Hamiltonian path of the observations is determined by means of Kruskal algorithm. Then an EWMA control chart with sliding window based on the number of runs of the shortest Hamiltonian path is proposed. The selection of the design parameters and the determination of control limit are discussed in detail. The effect of different dimensions, shift magnitude, reference data size and the underlying distribution are investigated via Monte Carlo simulation. Compared with three recent non-parametric multivariate control charts, the newly proposed chart has superior performance when mean shift magnitude is large and the underlying distribution is non-normal. Also, the chart proposed is more suitable for monitoring in high-dimensional situations. A real case study is also presented to show the implementation procedures of the chart.
Phase II monitoring of generalized linear profiles using weighted likelihood ratio charts

Dequan Qi,Zhaojun Wang,Xuemin Zi,Zhonghua Li

DOI: https://doi.org/10.1016/j.cie.2016.01.022

IF: 7.18

2016-01-01

Computers & Industrial Engineering

Abstract:•We focus on effective profile monitoring for discrete response.•We provide a unified framework for generalized linear profile monitoring.•A new control chart is developed based on the weighted likelihood ratio test.•Our approach can be readily extended to other general profiles.
A Phase II Control Chart Based on the Weighted Likelihood Ratio Test for Monitoring Polynomial Profiles

Cailian Yao,Zhonghua Li,Chuan He,Jiujun Zhang

DOI: https://doi.org/10.1080/00949655.2019.1699925

IF: 1.225

2019-01-01

Journal of Statistical Computation and Simulation

Abstract:In this paper, a new Phase II control chart based on the weighted likelihood ratio test (WLRT) is proposed for monitoring polynomial profiles. The new chart can be easily designed and constructed. Due to the good properties of the likelihood ratio test, computation results show that it provides quite satisfactory performance in various cases, including the detection of the decrease in variance which is very important in many practical applications but may not be well handled by the existing approaches in the literature. Average run length (ARL) comparisons between some other procedures and the new chart are presented. The effect of parameter estimates on the WLRT chart is considered. The application of our proposed method is illustrated by a simulation example.
Multivariate Binomial/multinomial Control Chart

Jian Li,Fugee Tsung,Changliang Zou

DOI: https://doi.org/10.1080/0740817x.2013.849830

2014-01-01

IIE Transactions

Abstract:This article considers statistical process control for multivariate categorical processes. In particular, there is a focus on multivariate binomial and multivariate multinomial processes. More and more real applications involve categorical quality characteristics, which cannot be measured on a continuous scale. These characteristic factors usually correlate with each other, indicating a need for multivariate charting techniques. However, there is a scarcity of research on monitoring multivariate categorical data, and most existing methods lack robustness for some deficiencies. This article reports the use of log-linear models for characterizing the relationship among categorical factors that are adapted into a framework of multivariate binomial and multivariate multinomial distributions. A Phase II control chart is proposed that is robust in efficiently detecting various shifts, especially those in interaction effects representing the dependence among factors. Numerical simulations and a real data example demonstrate the effectiveness of the chart.
A Multivariate Control Chart for Simultaneously Monitoring Process Mean and Variability.

Jiujun Zhang,Zhonghua Li,Zhaojun Wang

DOI: https://doi.org/10.1016/j.csda.2010.03.027

IF: 2.035

2010-01-01

Computational Statistics & Data Analysis

Abstract:Recently, monitoring the process mean and variability simultaneously for multivariate processes by using a single control chart has drawn some attention. However, due to the complexity of multivariate distributions, existing methods in univariate processes cannot be readily extended to multivariate processes. In this paper, we propose a new single control chart which integrates the exponentially weighted moving average (EWMA) procedure with the generalized likelihood ratio (GLR) test for jointly monitoring both the multivariate process mean and variability. Due to the powerful properties of the GLR test and the EWMA procedure, the new chart provides quite robust and satisfactory performance in various cases, including detection of the decrease in variability and individual observation at the sampling point, which are very important cases in many practical applications but may not be well handled by existing approaches in the literature. The application of our proposed method is illustrated by a real data example in ambulatory monitoring.
Statistical Process Monitoring of Autocorrelation Data from Multistage Processes

Yu Fu-cheng

Abstract:An effective multivariate process control charts for auto-correlated data from multistage processes was established,and the formula for calculating its average run length was given by combining state-space models and statistical process control methods.The correctness of the formula was verified by Monte Carlo simulation.Finally,the new method was illustrated with one real example to demonstrate the implementation steps.The results show that in control the chart has low alarm rate,while out of control it has high alarm rate.

Computer Science,Engineering
Nonparametric Control Scheme for Monitoring Phase II Nonlinear Profiles with Varied Argument Values

Yang Zhang,Zhen He,Juntao Fang,Min Zhang

DOI: https://doi.org/10.3901/cjme.2012.03.587

2012-01-01

Abstract:Profile monitoring is used to check the stability of the quality of a product over time when the product quality is best represented by a function at each time point. However, most previous monitoring approaches have not considered that the argument values may vary from profile to profile, which is common in practice. A novel nonparametric control scheme based on profile error is proposed for monitoring nonlinear profiles with varied argument values. The proposed scheme uses the metrics of profile error as the statistics to construct the control charts. More details about the design of this nonparametric scheme are also discussed. The monitoring performance of the combined control scheme is compared with that of alternative nonparametric methods via simulation. Simulation studies show that the combined scheme is effective in detecting parameter error and is sensitive to small shifts in the process. In addition, due to the properties of the charting statistics, the out-of-control signal can provide diagnostic information for the users. Finally, the implementation steps of the proposed monitoring scheme are given and applied for monitoring the blade manufacturing process. With the application in blade manufacturing of aircraft engines, the proposed nonparametric control scheme is effective, interpretable, and easy to apply.
A control chart for monitoring the lognormal process variation using repetitive sampling

Uzma Shaheen,Muhammad Azam,Muhammad Aslam

DOI: https://doi.org/10.1002/qre.2613

2020-01-13

Quality and Reliability Engineering International

Abstract:Control charts are developed to make the specific quality measures for a successful production process and follow normal distribution behaviors. But some real‐life practices do not match such practices and exhibit some positively skewed behavior like lognormal distribution. The present study has considered this situation and proposed a monitoring control chart based on lognormal process variation using a repetitive sampling scheme. This concept proved better for detecting shifts as quickly as possible, and compared with the existing concept, results are elaborated through extensive tables. The average run lengths and standard deviations of the run lengths are being used as a performance evaluation measures and computed by using Monte Carlo simulations performed in R language. A real‐life situation has been discussed in the example section to strengthen the proposed control chart concept in a real‐life situation.

engineering, industrial, multidisciplinary,operations research & management science

The Multivariate Linear Profile Control Chart

Monitoring of Linear Profiles Using Linear Mixed Model in the Presence of Measurement Errors

Control chart for monitoring multivariate COM-Poisson attributes

On the Monitoring of Linear Profiles

Profile control chart based on maximum entropy

A Self-Starting Control Chart for Linear Profiles

A control chart for monitoring linear circular-circular profile

Control Chart Based On Likelihood Ratio For Monitoring Linear Profiles

Developing Machine Learning-based Control Charts for Monitoring Different GLM-type Profiles With Different Link Functions

Optimization of monitoring rules for multivariate pre-control charts

On Median Control Charting Under Double Sampling Scheme

Zone Control Charts With Estimated Parameters For Detecting Prespecified Changes In Linear Profiles

Control Charts for Monitoring Linear Profiles with Within‐Profile Correlation Using Gaussian Process Models

A Multivariate Non-Parametric Control Chart Based on Run Test.

Phase II monitoring of generalized linear profiles using weighted likelihood ratio charts

A Phase II Control Chart Based on the Weighted Likelihood Ratio Test for Monitoring Polynomial Profiles

Multivariate Binomial/multinomial Control Chart

A Multivariate Control Chart for Simultaneously Monitoring Process Mean and Variability.

Statistical Process Monitoring of Autocorrelation Data from Multistage Processes

Nonparametric Control Scheme for Monitoring Phase II Nonlinear Profiles with Varied Argument Values

A control chart for monitoring the lognormal process variation using repetitive sampling