Abstract:Introduction. The control algorithm of Induction Motor (IM) is massively dependent on its parameters; so, any variation in these parameters (especially in rotor resistance) gives unavoidably error propagates. To avoid this problem, researches give more than solution, they have proposed Variable Structure Control (VSC), adaptive observers such as Model Reference Adaptive System, Extended Luenberger Observer (ELO) and the Extended Kalman Filter (EKF), these solutions reduce the estimated errors in flux and speed. As novelty in this paper, the model speed observer uses the estimated currents and voltages as state variables; we develop this one by an error feedback corrector. The Indirect Rotor Field Oriented Control (IRFOC) uses the correct observed value of speed; in our research, we improve the observer’s labour by using back-stepping Sliding Mode (SM) control. Purpose. To generate the pulse-width modulation inverter pulses which reduce the error due of parameters variations in very fast way. Methods. We develop for reach this goal an exploration of two different linear observers used for a high performance VSC IM drive that is robust against speed and load torque variations. Firstly, we present a three levels inverter chosen to supply the IM; we present its modelling and method of control, ending by an experiment platform to show its output signal. A block diagram of IRFOC was presented; we analyse with mathematic equations the deferent stages of modelling, showed clearly the decoupling theory and the sensorless technique of control. The study described two kinds of observers, ELO and EKF, to estimate IM speed and torque. By the next of that, we optimize the step response using the fuzzy logic, which helps the system to generate the PI controller gains. Both of the two observers are forward by SM current controller, the convergence of SM-ELO and SM-EKF structures is guaranteed by minimizing the error between actual and observed currents to zero. Results. Several results are given to show the effectiveness of proposed schemes.

A Speed Sensorless Vector Control Method of IM Using Extended Kalman Filter

Improving Extended Kalman Filter for Speed Sensorless Vector Control of Induction Motor

A novel speed sensorless field-oriented control scheme of IM Using Extended kalman filter with load torque observer

Applications of Unscented Kalman Filter on Position Sensorless Control of Permanent Magnet Linear Syncheonous Motor

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

PMSM Mechanical Sensor-Less Vector Control Based on Extended Kalman Filter

Fading EKF-based Adaptive Speed Observer of Induction Motor

Sensorless Control of Synchronous Reluctance Motor Based on Active Flux Vector and Extended Kalman Filter

Sensorless Control Method Of Pmsm Based On Extended Kalman Filter

A comparative study of luenberger observer, sliding mode observer and extended Kalman filter for sensorless vector control of induction motor drives

ESO-based Sensorless Vector Control of Induction Motors

Sensorless Control of PMSM Based on Extended Kalman Filter

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control

Speed Sensorless Vector Control of Induction Motor Based on Full-Order Flux Observer

Sensorless Control of Permanent Magnet Synchronous Motor Based on Extended Kalman Filter

Speed-Sensorless Control of Induction Motor Drives with a STA-FLL Speed Estimation Scheme

Speed Sensorless Vector Control Based on Full-order Adaptive Observer for Induction Motor Drives at Low Speed

Speed Sensorless Vector Control with Improved Closed-Loop Flux Observer for Induction Machines

Speed and Flux Linkage Observer for Permanent Magnet Synchronous Motor Based on EKF

High Performance PMSM Control System Based on Extended Kalman Filter

Sensorless Vector Control System of Induction Motor Fed by Three-Level Inverter Using a Full Order Observer