Abstract:Purpose This paper aims to present an iterative path-following method with joint limits to solve the problem of large computation cost, movement exceeding joint limits and poor path-following accuracy for the path planning of hyper-redundant snake-like manipulator. Design/methodology/approach When a desired path is given, new configuration of the snake-like manipulator is obtained through a geometrical approach, then the joints are repositioned through iterations until all the rotation angles satisfy the imposed joint limits. Finally, a new arrangement is obtained through the analytic solution of the inverse kinematics of hyper-redundant manipulator. Finally, simulations and experiments are carried out to analyze the performance of the proposed path-following method. Findings Simulation results show that the average computation time is 0.1 ms per step for a hyper-redundant manipulator with 12 degrees of freedom, and the deviation in tip position can be kept below 0.02 mm. Experiments show that all the rotation angles are within joint limits. Research limitations/implications Currently , the manipulator is working in open-loop, the elasticity of the driving cable will cause positioning error. In future, close-loop control based on real-time attitude detection will be used in in combination with the path-following method to achieve high-precision trajectory tracking. Originality/value Through a series of iterative processes, the proposed method can make the manipulator approach the desired path as much as possible within the joint constraints with high precision and less computation time.

Kinematic Research on Hinged Synchronous Universal Joint Applied for Snake-like Manipulator

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

The Modeling and Visual Control Simulation of Articulated Serpentine Manipulator

Configuration and Kinematic Analysis of a Novel Hybrid Surgical Robot with a Ball Joint

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

An Iterative Path-Following Method for Hyper-Redundant Snake-Like Manipulator with Joint Limits.

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Differential kinematics for a tendon-driven snake-like robot

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Position-Based Visual Servoing Control for Multi-Joint Hydraulic Manipulator

A Geometric Approach for Follow-the-leader Motion of Serpentine Manipulator

Difirential Kinematics for A Tendon -driven Snake-like Robot

Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

Kinematic Modelling Analysis and Simulation of 6-DOF Manipulator

Design and Kinematics Analysis for a Cable-driven Underwater Snake Arm Robot

A Kinematic Equivalence Trajectory Planning Method of Hybrid Active and Passive Cable-Driven Segmented Hyper-Redundant Manipulator.

Kinematics and dynamics analysis of the 3PUS-PRU parallel mechanism module designed for a novel 6-DOF gantry hybrid machine tool

Inverse Kinematic and Dynamic Analyses of the 6-UCU Parallel Manipulator

Kinematics and dynamics analysis of a six-degree of freedom parallel manipulator

Kinematic-Free Position Control for A Deformable Manipulator

Kinematics and dynamics Hessian matrices of manipulators based on screw theory