Flocculation Effect of Water Soluble Soybean Polysaccharides on Brewer Yeast Suspension
Wen-hong GAO,Ping-zhou LIN,Bi-jiang ZHONG,Xin-an ZENG
DOI: https://doi.org/10.3969/j.issn.1000-565X.2016.10.018
2016-01-01
Abstract:Three kinds of water soluble soybean polysaccharides,namely,SSPS P1,SSPS P2 and SSPS P3,were extracted from soy bean dregs by using tartaric acid,sodium hexametaphosphate and sodium hydroxide.Then,the flocculation effects of the SSPS on the brewer yeast suspension with different metal cations (Al3 +,Fe3+,Fe2+,Mg2+,Ca2+,K+ and Na+),polysaccharide concentrations,pH values and temperatures were respectively investigated.Moreover,the response surface experiment design was performed to optimize the flocculation conditions,and a corresponding mathematical regression model was constructed.Single factor research results show that (1) SSPS P1 has the best effect in flocculating the brewer yeast suspension;(2) most of the metal cations increase the flocculation effects,among which Fe3 + shows the best performance;(3) when the Fe3+ concentration reaches 0.025 mmol/L,the best flocculation effect can be achieved;(4) the flocculation effects can also be influenced by the SSPS P1 concentration and the temperature,and the effects are better at 10mg/L and 30 ℃;and (5) a strong alkaline environment is helpful in adopting SSPS P1 to flocculate the brewer yeast suspension.The analytical results based on the constructed model indicate that the optimal flocculating condition is a SSPS P1 mass concentration of 11.56 mg/L,a Fe3+ concentration of O.26 mmol/L,a pH value of 9.05 and a temperature of 30.68 ℃,and the experimental value of the flocculating rate under the optimal condition is very close to the predicted one,which means that the constructed model can reflect the influence of various factors on the flocculation effect.