Abstract:Fluoropolymer films have so low surface energy that they have good special surface properties, such as water-resistant, oil-resistant and self-cleaning properties. Nowdays, surface properties of polyacrylates can be modified by introducing fluorine-containing groups to polymer chains. The acrylate copolymer emulsion containing fluorine was prepared, with fluoromoner ( Zonyl TM), butyl acrylate ( BA), methyl methylacrylate (MMA) as monomers, sodium dodocyl sulfonate ( SDS) as emulsifier. The solid content of copolymer emulsion was about 25wt%. The kinetics of emulsion copolymerization was studied by the weight method. The effects of the concentration of emulsifier, initiator, monomer and polymerization temperature on polymerization rate (R-p) were investigated in detail. The results showed that R-p proportional to [SDS](0.28), R-p proportional to [I](0.98). The apparent activation energy was 50.756 kJ.mol(-1). The copolymer emulsions had no change after stored at room temperature for 72 h, at 60degreesC for 48 h and at -5degreesC for 24 h respectively. The centrifugal stability of emulsions was characterized at 12000 r/min for 120 min. The sedimentation ratios showed that the centrifugal stability of emulsions increased with increasing the amount of emulsifier, while decreased with increasing the amounts of initiator and fluoromonomer respectively. The latex films could be dissolved in THF and toluene, while could be swelled in methanol and ethanol. The water absorption of latex films decreased with increasing the amount of fluoromonomer. The surface property of films was determined by Wilhelmy method. The contact angles for latex films to water increased apparently by introducing fluorine-containing groups, above 100degrees. This result showed the water-resistant property of copolymer latex films containing fluorine was improved.

Preparation and Application on Fabrics of Fluorinated Acrylic Copolymer Emulsion

Preparation of fluorinated acrylate emulsion by micro-jet pre-emulsification

Synthesis and Characterization of Polyurethane Modified Fluorinated Acrylate Fabric Finishing Agent

Synthesis and characterization of fluoride polyacrylate emulsion for super-hydrophobic and oleophobic fabric finishing

Synthesis and Charaterization of Fluorinated Polyacrylate Emulsion

Preparation and Surface Property of Cationic Emulsifier-Free Fluorinated Polyacrylates

Preparation of cationic fluorinated acrylate copolymer latex and its application on cotton fabric

Preparation and Application of Cationic Fluorinated Polyacrylate Emulsion

The Study of the Acrylate Copolymer Emulsion Containing Fluorine

Preparation and characterization of fluorine-containing acrylate copolymers by 60Co γ-ray radiation co-polymerization

Preparation of Fluorine-Containing Acrylate Emulsion

Synthesis and surface property characterization of polyacrylate with short fluorocarbon side chain

Progress of Fluorinated Acrylate Copolymer Emulsion

Preparation of Slightly Cross-Linked Fluorocarbon Acrylate Emulsion

Properties and Characterization of Novel Cationic Polyacrylate Latex Containing Fluorine and Silicon Prepared with Soap-Free Emulsion Polymerization

Evaluating Fluorinated Acrylic Latices as Textile Water and Oil Repellent Finishes

Preparation and Properties of Fluorinated Poly-Acrylate Emulsion with Tpg As Co-Solvent

Preparation and fluorine enrichment behavior of fluorinated polyester

Study on Synthesis of Fluorinated Acrylic Copolymer Emulsion and Properties of Films

Fluorinated Polyacrylate Emulsion and Surface Properties of Their Films

Stability of Emulsion Polymerization of New Fluorinated Acrylate Emulsion and Its Characterization