The Using of Metal Magnetic Memory Technique in Testing Drill Rod

Xinliang Tian

2006-01-01

Abstract:The article presents a new nondestructive testing method:metal magnetic memory(MMM) technology and its principle and advantages as well.The necessary and effect of MMM in testing drill rod is detailed discussed based on experience of inspection.The potential application of MMM testing in drill rod is expected.

What problem does this paper attempt to address?

Advances and Evaluation of Metal Magnetic Memory NDT Technique

WANG Zheng-dao,YAO Kai,SHEN Kai,HUANG Ting

2012-01-01

Abstract:Metal Magnetic Memory(MMM) is a newly developed magnetic non-destructive testing(NDT) method.It is effective in characterizing the early damage of widely-used ferromagnetic materials and structures in engineering.However,at the present time this technique is still limited as a mechanism investigation and applied as a qualitative NDT tool due to its short history,lack of robust theoretical basis and varied disturbance factors in testing.This review outlines the research progress of the MMM technique in the last decade.Some key points were discussed,including criteria of using MMM technique to judge the damage state(plastic deformation or macro-crack),the character parameters to provide a quantitative evaluation on the testing result,some affecting factors of experimental results,and the physical model to describe such non-elastic magnetic-stress coupling effect.Finally,some future development trends about this technique are suggested.
A Review of the Metal Magnetic Memory Method

Sheng Bao,Pengfei Jin,Zhengye Zhao,Meili Fu

DOI: https://doi.org/10.1007/s10921-020-0652-z

2020-01-20

Journal of Nondestructive Evaluation

Abstract:Metal magnetic memory (MMM) method is a non-destructive testing (NDT) technology which has potentials to detect early damage. A review is presented in this paper about the development of this method, including the theoretical studies of the magnetic/stress coupling effect, factors influencing the detection signals, the criteria for judging the damage state and defect identification. Directions of future research are also discussed.

materials science, characterization & testing
Development of Metal Magnetic Memory Testing Technique

WANG Zheng-Dao,YAO Kai,DING Ke-Qin

2009-01-01

Abstract:In addition to detecting the macro-cracks,metal magnetic memory(MMM) testing technique can also determine the micro-damage due to stress concentration. Due to owning many advantages of portable testing device, easy operation process,and simple damage criterion,it can be applied widely. However,as a new nondestructive testing method,many aspects are still questionable and unclear. For example,the physical mechanism and the theoretical models of this method,how to provide more reliable and quantitative testing results,and any further information received from this method are all not very clear. In addition to the basic testing principle,some typical engineering applications were shown,and some discussions and future development tendency of MMMT were presented.
Study of metal magnetic memory (MMM) technique using permanently installed magnetic sensor arrays

Zhichao Li,Steve Dixon,Peter Cawley,Rollo Jarvis,Peter B. Nagy

DOI: https://doi.org/10.1063/1.4974689

2017-01-01

AIP Conference Proceedings

Abstract:The metal magnetic memory (MMM) effect has been reported to be a non-destructive testing technique capable of evaluating stress concentration and detecting defects in steel. This method has been shown to work well in some instances, but has failed in other trials. Its mechanism has been explained widely but the sensitivity to stress concentration has not been satisfactorily investigated. In this paper, both the normal and tangential components of the stress induced MMM signal were measured by two permanently installed magnetic sensor arrays on two types of notched L80 steel specimens. As expected, the results show that an externally applied magnetic field changes the magnetic field perturbation due to the notches linearly. Plastic deformation and residual stress around notches will increase the remnant flux leakage but the effects are small, which suggests that the MMM effect is very small in the material tested and that it will not be useful in practice.
Stress State Detection Based on Metal Magnetic Memory Theory

HaiYan Xing,RiXin Wang,MinQiang Xu,JiaZhong Zhang

DOI: https://doi.org/10.1115/pvp2005-71271

2005-01-01

Abstract:The metal magnetic memory (MMM) technology, a new nondestructive evaluation (NDE) method, is an effective means for early damage prediction. However, there is so much work to do, such as the relationship between the magnetic field density and stress state. This paper aims at finding out MMM signal characteristics of critical damage stress state by tension experiments. Comparisons between MMM testing and traditional NDE method are presented. The principle of MMM testing is investigated. Different materials, low carbon steal X70 and medium carbon Q235B, are detected on-line and off-line respectively. It is found that MMM signal rules are gradually increasing up to fluctuating on the verge of yield and sharp changing of magnetic polarity on the verge of fracture. With the increase in material strength, magnetic field density of low carbon steel X70 is lower than that of medium carbon steel Q235B. This offers fundamental study for the quantitative MMM testing of critical damage stress state.
Study Metal Magnetic Memory Signals of Welded Plate

WU Da-bo,XU Min-qiang,LU Sheng-zhuo

2011-01-01

Abstract:This paper introduced metal magnetic memory(MMM) technique,a newly developed nondestructive testing(NDT) method.MMM is suitable for the NDT in mine,metallurgical,petroleum and chemical industries.Study the metal magnetic memory signals of welded plate with heat treatment through the three-point bending fatigue test.
A PALM METAL MAGNETIC MEMORY TESTING INSTRUMENT

李路明,胡斌,黄松岭,王晓凤,霍雪亮,曹益平

DOI: https://doi.org/10.3969/j.issn.1000-6656.2004.05.008

2004-01-01

Abstract:As a new method of nondestructive testing(NDT), magnetic memory testing (MMT) was suitable for the pre-diagnosis in pressure vessel, metallurgical, petroleum and chemical industries. A portable and low power MMT instrument was developed for on-line inspection. The characteristics of the testing instrument, data collection based on MCU (micro control unit), dynamic wave display and result analysis were introduced. Stress concentration was measured experimentally with the instrument and was compared with small hole method to show the reliability of the instrument.
A study on fatigue life evaluation of 42CrMo steel under cyclic loading based on metal magnetic memory method

Hao Jiang,Laibin Zhang,Jianchun Fan,Zhitong Zhang,Kaiwen Wang

DOI: https://doi.org/10.1016/j.ndteint.2024.103285

IF: 4.683

2024-12-03

NDT & E International

Abstract:Accidents involving drilling tool fractures in the process of oil and gas resource exploration and development occur frequently, and there are few detection methods for detecting the residual fatigue life of drilling tool joints with irregular surfaces. Therefore, developing a quick and effective method to evaluate fatigue damage in drilling tool joints is particularly important. In this study, a fatigue life evaluation method for ferromagnetic materials was established based on metal magnetic memory (MMM) detection technology, which can be used in the petroleum industry to evaluate the remaining life of drilling tool joints. First, the relationship between the impact load and specimen fatigue life was determined through a simulation, followed by a fatigue test, and the magnetic signals on the surface of the specimen under different fatigue loads were collected. The effects of the three evaluation methods were compared, and it was found that dynamic time warping (DTW) was more accurate for the evaluation of metal fatigue. Finally, a fatigue damage evaluation model for ferromagnetic metallic materials was established, and the feasibility of the method was verified using test data. This method can effectively predict the remaining fatigue life of threaded specimens, and can be applied in the petroleum industry to evaluate the remaining fatigue life of drilling tool joints. This study provides guidance for the petroleum industry in ensuring the safety of drilling tools.

materials science, characterization & testing
The metal magnetic memory method application for online monitoring of damage development in steel pipes and welded joints specimens

Anatoly Dubov,Sergey Kolokolnikov

DOI: https://doi.org/10.1007/s40194-012-0011-5

IF: 2.1

2013-01-08

Welding in the World

Abstract:The magnetic memory of metal (MMM) is an after-effect, which occurs in the form of metal residual magnetization in components and welded joints formed in the course of their fabrication and cooling in the weak magnetic field of the earth and in the form of irreversible change of components’ magnetization in zones of stress concentration and damages under working loads (ISO 24497–1:2007(E)). The results of experimental investigation by the metal magnetic memory of steel specimens in the process of their static and cyclic loading are presented. Investigation using the MMM method was carried out online in the process of cyclic loading in the synchronous manner with load frequency. Specific features of self-magnetic field’s (SMLF) intensity variation at maximum load during tensile cyclic load were revealed. The obtained results of specimens investigation experimentally confirmed the earlier drawn conclusion about the possibility of the MMM method and corresponding inspection instruments application for quick testing of mechanical properties and cyclic strength parameters at the physical level. Comparison of σ–ε deformation curves and σ–ΔHx, ΔHx–ε magnetograms, obtained in the static loading mode, of σ–ε cyclic loading profiles and corresponding magnetograms confirms once more the earlier established correlation of magnetomechanical parameters conditioned by the “magnetodislocation hysteresis”. Fatigue curves, plotted by variation of the self-magnetic field of the specimens in the process of cyclic loading, experimentally confirm the possibility of equipment life assessment by parameters of the metal’s magnetic memory. Magnetograms, recorded online in the process of cyclic loading of specimens, allow claiming the possibility of the MMM method and the Tester of Stress Concentration type instruments application for technical state monitoring during operation of equipment under load conditions.

metallurgy & metallurgical engineering
Magnetic Memory Detect and Maintain Ferromagnetic Component Early

Su Jun,Hu Wenxue,Xue Shunli,Li Zunchao

DOI: https://doi.org/10.3321/j.issn:1671-4598.2007.04.015

2007-01-01

Abstract:Metal magnetic memory technology(MMMT)is new nondestructive testing(NDT)method that can detect the hidden damage in ferromagnetic component early and avoid component-tired damage happen abruptly.The method can accurate detect stress con- centration zone(SCZ)on dangerous component or position by measure.That is one and only effective method that is nondestructive testing for detect ferromagnetic component.By detect metal magnetic component leak magnetic field,estimate magnetic field perpendicular to the material surface approach by zero that is evidence feature,so ensure ferromagnetic component exist damage or stress concentration in this zone.This method of measure leak magnetic field can find out stress concentration zone fast and convenient,implement to detecting for e- quipment component early.
Research Progress of Metal Magnetic Memory Testing Technique in Ferromagnetic Components

LENG Jian-cheng,XU Min-qiang,XING Hai-yan

DOI: https://doi.org/10.3969/j.issn.1001-4381.2010.11.021

2010-01-01

Abstract:Metal magnetic memory technique has potentials to detect early failure,such as stress concentration and fatigue damage of ferromagnetic components.The paper summarizes recent advances in the developments of magnetic memory technique,from mechanism study,basic experiments to influence factors on detection signals and its engineering application,and discusses some questions in theory and practical applications.The characteristics and future research directions of metal magnetic memory technique are also presented on the basis of the current research status at home and abroad.
Overview of Researches on the Nondestructive Testing Method of Metal Magnetic Memory: Status and Challenges

Pengpeng Shi,Sanqing Su,Zhenmao Chen

DOI: https://doi.org/10.1007/s10921-020-00688-z

2020-05-31

Journal of Nondestructive Evaluation

Abstract:More than 20 years of research progress regarding the nondestructive testing method of metal magnetic memory is reviewed and summarized in detail. Consequently, this overview is selective, covering what we feel are the most important trends of experimental phenomena, mechanism explanations, quantitative theories, simulations, testing, evaluation and application. From analyzing the current state of research on the method of metal magnetic memory, some key problems and future developmental trends are proposed. Although the research on magnetic memory method has made great progress, the practical application still faces problems such as complex influencing factors and less quantitative research. In the future, for magnetic memory method, it is necessary to strengthen the microscopic observations of magnetic domains, experiments of magnetomechanical constitutive, establishment of quantitative models, modeling of complex influencing factors, and the study of identification, inversion and criteria. In addition, the combination of other non-destructive testing methods can greatly improve the practical application of the magnetic memory method.

materials science, characterization & testing
Numerical studies to signal characteristics with the metal magnetic memory-effect in plastically deformed samples

Kai Yao,Bo Deng,Zhengdao Wang

DOI: https://doi.org/10.1016/j.ndteint.2011.12.004

IF: 4.683

2012-01-01

NDT & E International

Abstract:Metal magnetic memory (MMM) is a new non-destructive (NDT) method for inspecting the early damage of ferromagnetic structures using the residual magnetic field (RMF) signals. Our previous experimental research has confirmed that ferromagnetic materials exhibit various RMF features in different deformation stages. This paper presents a 2-Dimensional (2D) numerical study of RMF characteristics of ferromagnetic samples subject to the mechanical deformation. A new criterion is proposed to determine the plastic deformation. Then some parameters are defined to characterize the RMF signal. After that, the dependence of these parameters on the defect width, depth, location, testing position and direction are analyzed. This work is useful for promoting the MMM from a qualitative NDT technique to quantitative technique.
Fatigue Damage Analysis of Prefabricated Concrete Composite Beams Based on Metal Magnetic Memory Technique

Zhiyu Xie,Dawei Zhang,Tamon Ueda,Weiliang Jin

DOI: https://doi.org/10.1016/j.jmmm.2021.168722

IF: 3.097

2021-01-01

Journal of Magnetism and Magnetic Materials

Abstract:Current studies have shown that using magnetic field change around the ferromagnetic material to characterize the fatigue damage is very effective, but researches on using metal magnetic memory (MMM) technique to detect fatigue damage are mostly limited to the material level. There are few studies on the mechanism of the magnetic signal change or numerical simulations at the member level. In this paper, cyclic loading tests were carried out on 8 prefabricated concrete composite beam specimens using wet connection technology. The relationship between the variation in the magnetic field of the steel reinforcement and the interface peeling damage of the specimens were investigated. Based on the magnetic flux density, the interface deformation, and the longitudinal bar strain, the mechanism of the magnetic signal change in different stages as well as interface peeling's effect on the magnetic flux density were revealed. The feasibility of using the MMM field to characterize the fatigue damage of the composite spcimens was thus verified. Meanwhile, based on the modified J-A-S model, the model for magnetization change of prefabricated reinforced concrete components was established. By comparing the experimental and the simulation results, it is verified that the proposed model could effectively describe the magnetization change trend of the composite spcimens during the fatigue process.
Application of the metal magnetic memory method for detection of defects at the initial stage of their development for prevention of failures of power engineering welded steel structures and steam turbine parts

Anatoly Dubov,Alexandr Dubov,Sergey Kolokolnikov

DOI: https://doi.org/10.1007/s40194-013-0102-y

IF: 2.1

2013-10-03

Welding in the World

Abstract:The magnetic memory of metal is an after-effect, which occurs in the form of metal residual magnetization in components and welded joints formed in the course of their fabrication and cooling in the weak magnetic field of the earth. It also occurs in the form of irreversible change of components’ magnetization in zones of stress concentration and damage under working loads. This article describes the experience with carrying out comprehensive testing of base metal and welded joints of welded steel structures (piping, pressure vessels, etc.) and steam turbine parts by using the method of metal magnetic memory and other conventional nondestructive testing methods, and microstructure analysis. It is shown that the stress concentration zones are the locations of defects and/or material properties degradation.

metallurgy & metallurgical engineering
Study on Improving the Service Life of Drill Rods by Magnetic Treatment

Jian LIN,Hai-yan ZHAO,Zhi-peng CAI,An-li LU

DOI: https://doi.org/10.3969/j.issn.1001-4381.2006.02.001

2006-01-01

Abstract:In order to improve the service life of the drill rod, a novel method for reducing residual stress, magnetic treatment, is developed. In this method, an interaction between the alternate magnetic field and the residual stress occurs and so the residual stresses are lowered and redistributed. It is verified by experiments that the service lives of the drill rods made from 55SiMnMo steel and those made from 95CrMo steel are all improved after magnetic treatment, and rods made from 55SiMnMo steel got a more obvious improvement. Furthermore it is showed that the fracture form of the drill rods is little affected by magnetic treatment.
Metal Fatigue State Evaluation Using Magnetic Memory Technology

Haiyan Xing,Minqiang Xu,Dabo Wu

2009-01-01

Abstract:This paper aims to evaluate fatigue state with the Metal Magnetic Memory (MMM) testing. The fatigue experiments are done on the PQ1-6 rotary bending fatigue machinery. The samples are made by Steel Q235 with artificial crack of different depth and breadth. The fatigue state MMM features are as following: the tangent component Hp(x) of magnetic induction intensity is gradually increasing up to the peak value while the fatigue crack is initiating and growing; and Hp(x) is descending with the crack deepening after that peak. On the basis of dislocation mechanics and fracture mechanics, the MMM features are analyzed and deduced theoretically. The results of further metallographic examination have certified the validity of the MMM fatigue damage evaluation.
Stress measurement using magnetic Barkhausen noise and metal magnetic memory testing

Ping Wang,Shougao Zhu,Gui Yun Tian,Haitao Wang,John Wilson,Xin Wang

DOI: https://doi.org/10.1088/0957-0233/21/5/055703

IF: 2.398

2010-03-31

Measurement Science and Technology

Abstract:This paper introduces a comparison of the magnetic Barkhausen noise (BN) and metal magnetic memory (MMM) testing techniques for stress measurement. BN has become an important non-destructive technique due to its exceptional material and stress characterization capabilities. MMM is a recently developed technique with special ability for stress detection and stress history. In the applied tensile experiment, BN and MMM signals were acquired via a BN measurement system and EMS-2003 MMM instrument. Relationships between magnetic signals and applied tensile stresses were derived from experiment results. The difference and correlation of the two methods are investigated. Conclusions were derived based on the experiment results.

engineering, multidisciplinary,instruments & instrumentation
Study on physical mechanism of metal magnetic memory technique

Dabo Wu,Minqiang Xu,Jianwei Li

DOI: https://doi.org/10.4028/www.scientific.net/AMM.34-35.841

2010-01-01

Abstract:The evaluation of stresses in engineering structures to provide early indications of stress status is a fast growing area in non-destructive testing. Metal magnetic memory technique is the magnetic stress measurement technique for ferromagnetic materials using passive magnetic fields to monitor changes in the magnetic properties of materials. This paper studied the physical formation process of metal magnetic memory effect. This paper studied the physical mechanism between stress and magnetic field in metal magnetic memory effect, through the influence of stress-induced magnetic anisotropy on magnetization process of ferromagnetic crystal.
Fatigue Property of Steel Q235 Based on Metal Magnetic Memory Testing

Hai Yan Xing,Jia Zhong Zhang,Zun Bao Zhao,Min Qiang Xu,Ri Xin Wang,Da Bo Wu

DOI: https://doi.org/10.1115/imece2006-13457

2006-01-01

Abstract:Fatigue damage is the most common kind of failure for metal materials. Traditional non-destructive testing (NDT) methods fail to predict early fatigue damage. Magnetic Metal Memory (MMM) Testing, a new NDT technology, has the potential of fatigue damage evaluation. This paper aims to investigate fatigue mechanical property of ferromagnetic material with the MMM method. Steel Q235 samples with different depth and breadth artificial crack are tested in rotary bending fatigue machinery. The MMM fatigue features are as follows: the tangent component Hp(x) of magnetic induction intensity is gradually increasing up to the peak value while the fatigue crack is initiating and growing; after that peak, Hp(x) is descending with the crack deepening. Furthermore, the features have been studied theoretically.

The Using of Metal Magnetic Memory Technique in Testing Drill Rod

Advances and Evaluation of Metal Magnetic Memory NDT Technique

A Review of the Metal Magnetic Memory Method

Development of Metal Magnetic Memory Testing Technique

Study of metal magnetic memory (MMM) technique using permanently installed magnetic sensor arrays

Stress State Detection Based on Metal Magnetic Memory Theory

Study Metal Magnetic Memory Signals of Welded Plate

A PALM METAL MAGNETIC MEMORY TESTING INSTRUMENT

A study on fatigue life evaluation of 42CrMo steel under cyclic loading based on metal magnetic memory method

The metal magnetic memory method application for online monitoring of damage development in steel pipes and welded joints specimens

Magnetic Memory Detect and Maintain Ferromagnetic Component Early

Research Progress of Metal Magnetic Memory Testing Technique in Ferromagnetic Components

Overview of Researches on the Nondestructive Testing Method of Metal Magnetic Memory: Status and Challenges

Numerical studies to signal characteristics with the metal magnetic memory-effect in plastically deformed samples

Fatigue Damage Analysis of Prefabricated Concrete Composite Beams Based on Metal Magnetic Memory Technique

Application of the metal magnetic memory method for detection of defects at the initial stage of their development for prevention of failures of power engineering welded steel structures and steam turbine parts

Study on Improving the Service Life of Drill Rods by Magnetic Treatment

Metal Fatigue State Evaluation Using Magnetic Memory Technology

Stress measurement using magnetic Barkhausen noise and metal magnetic memory testing

Study on physical mechanism of metal magnetic memory technique

Fatigue Property of Steel Q235 Based on Metal Magnetic Memory Testing