Abstract:OBJECTIVE: This study aimed to reconstruct 11 motor vehicle crashes (6 with thoracolumbar fractures and 5 without thoracolumbar fractures) and analyze the fracture mechanism, fracture predictors, and associated parameters affecting thoracolumbar spine response.METHODS: Eleven frontal crashes were reconstructed with a finite element simplified vehicle model (SVM). The SVM was tuned to each case vehicle and the Total HUman Model for Safety (THUMS) Ver. 4.01 was scaled and positioned in a baseline configuration to mimic the documented precrash driver posture. The event data recorder crash pulse was applied as a boundary condition. For the 6 thoracolumbar fracture cases, 120 simulations to quantify uncertainty and response variation were performed using a Latin hypercube design of experiments (DOE) to vary seat track position, seatback angle, steering column angle, steering column position, and D-ring height. Vertebral loads and bending moments were analyzed, and lumbar spine indices (unadjusted and age-adjusted) were developed to quantify the combined loading effect. Maximum principal strain and stress data were collected in the vertebral cortical and trabecular bone. DOE data were fit to regression models to examine occupant positioning and thoracolumbar response correlations.RESULTS: Of the 11 cases, both the vertebral compression force and bending moment progressively increased from superior to inferior vertebrae. Two thoracic spine fracture cases had higher average compression force and bending moment across all thoracic vertebral levels, compared to 9 cases without thoracic spine fractures (force: 1,200.6 vs. 640.8 N; moment: 13.7 vs. 9.2 Nm). Though there was no apparent difference in bending moment at the L1-L2 vertebrae, lumbar fracture cases exhibited higher vertebral bending moments in L3-L4 (fracture/nonfracture: 45.7 vs. 33.8 Nm). The unadjusted lumbar spine index correctly predicted thoracolumbar fracture occurrence for 9 of the 11 cases (sensitivity = 1.0; specificity = 0.6). The age-adjusted lumbar spine index correctly predicted thoracolumbar fracture occurrence for 10 of the 11 cases (sensitivity = 1.0; specificity = 0.8). The age-adjusted principal stress in the trabecular bone was an excellent indicator of fracture occurrence (sensitivity = 1.0; specificity = 1.0). A rearward seat track position and reclined seatback increased the thoracic spine bending moment by 111-329%. A more reclined seatback increased the lumbar force and bending moment by 16-165% and 67-172%, respectively.CONCLUSIONS: This study provided a computational framework for assessing thoracolumbar fractures and also quantified the effect of precrash driver posture on thoracolumbar response. Results aid in the evaluation of motor vehicle crash-induced vertebral fractures and the understanding of factors contributing to fracture risk.

Accuracy of Vehicle Frontal Stiffness Estimates for Crash Reconstruction

Method to Evaluate Safety Enhancement of the Past and Methodology to Predict Future Enhancement Based on Vehicle Deformation Depth

Validation of a generic finite element vehicle buck model for near-side crashes

Numerical Simulation and Test Validation of Vehicle Frontal Crash

Preliminary injury risk estimation for occupants involved in frontal crashes by combining computer simulations and real crashes

A Computational Investigation on the Effect of Vehicle Rotation on Driver Injury Metrics in Frontal Offset Crash

Comparison of Vehicle-Based Crash Severity Metrics for Predicting Occupant Injury in Real-World Oblique Crashes

Modeling Lead-Vehicle Kinematics for Rear-End Crash Scenario Generation

Elimination of rib stiffness difference for a Hybrid-III dummy in frontal crash test

Experimental evaluation of underride analysis techniques and empirical validation of a new analytical technique

Reconstruction Model of Vehicle Impact Speed in Pedestrian–vehicle Accident

Injury prediction in a side impact crash using human body model simulation

Prediction of Vehicle Crashworthiness Parameters Using Piecewise Lumped Parameters and Finite Element Models

Vehicle Deformation Depth Based Injury Risk Function for Safety Benefit Evaluation of Crash Avoidance and Mitigation Systems

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Computational modeling and analysis of thoracolumbar spine fractures in frontal crash reconstruction

Frontal crashworthiness structure analysis and optimization of electric vehicle

Field Testing and Numerical Investigation of Streetscape Vehicular Anti-Ram Barriers under Vehicular Impact Using Fem-Only and Coupled Fem-Sph Simulations

Simulation of Automobile Offset Frontal Impact and Structure Improvement

A New Vehicle Speed Estimation Method Based on the Longest Radial Crack on Windshield

Improvement of injury severity prediction (ISP) of AACN during on-site triage using vehicle deformation pattern for car-to-car (C2C) side impacts