Abstract:The characteristics of the materials used in early buildings in China have led to a large proportion of discarded red bricks among the construction waste generated by demolishing abandoned buildings. The application of red brick aggregate with a particle size ≤5 mm and red brick powder with particle size 0.125~0.75 mm (referred to as recycled brick powder) was studied in this study after the crushing of waste red brick in road structures. The research results will provide a theoretical basis for the whole-grain recycling of waste red brick aggregate. The aggregate of red brick with a particle size smaller than 2 mm was mixed with different amounts of cement soil and fiber to prepare a cement-stable binder for the sub-base material. The recycled brick powder of 0.125~0.75 mm was used to replace the quartz sand with different substitution rates. As pavement materials, different amounts of fiber were used to prepare fiber-reinforced recycled-brick-powder cementitious composites. The optimal mixing ratio of the two materials was evaluated from the mechanical properties. The results showed that the optimal mixing ratio of the cement-stable binder was as follows: waste-red-brick-aggregate content was 50%, cement content was 4%, and fiber content was 0.2%. The optimum ratio of fiber-reinforced recycled-brick-powder cementitious composites was determined to be as follows: the replacement rate of recycled brick powder is 25%, and the content of PVA fiber is 1%. The regression analysis was used to fit the equations between the fiber content and the 7d unconfined compressive strength and the tensile strength of the cement-stabilized binder for different red-brick-aggregate admixtures at 4% cement content. A scanning electron microscope was used to observe the failure modes of the fiber. The influence of failure modes, such as pulling out, fracture, and plastic deformation, on the mechanical properties was expounded.

Rapid Recognition Method of Red Brick Content in Recycled Brick-Concrete Aggregates and Powder Based on Color Segmentation

Automated Recognition and Measurement Based on Three-Dimensional Point Clouds to Connect Precast Concrete Components

Multi-objects Real Time Recognition Based on Color Information

Enhancement Strategies for Recycled Brick Aggregate Concrete Using MICP and EICP Treatments

Automated Recognition and Measurement Based on 3D Point Cloud for Precast Concrete Components Connection

Deep learning-based automated image segmentation for concrete petrographic analysis

Autonomous Recognition and Positioning of Shield Segments Based on Red, Green, Blue and Depth Information

Rapid Vision-Based System for Secondary Copper Content Estimation

Quick extraction of recycled sand morphology parameters based on deep learning and their effect on mortar property

Color Recognition for Rubik's Cube Robot

Online Workpieces Recognition for the Robotic Spray-Painting Production Line With a Low-Cost RGB-D Camera

Concrete forensic analysis using deep learning-based coarse aggregate segmentation

Analysis method of apparent quality of fair-faced concrete based on convolutional neural network machine learning

Segmentation and Analysis of Cement Particles in Cement Paste with Deep Learning

Predicting Compressive Strength of Color Pigment Incorporated Roller Compacted Concrete via Machine Learning Algorithms: A Comparative Study

Road Performance Investigation on Fiber-Reinforced Recycled Cement Base Material

Research Of Fast Recognition Of Robot-Soccer Based On Color Attributes

Vision-based mixed color detection of plastic particles

A Coke Detection Method Based on Reweighting a Composite Feature for Mixed Material Recognition and Quantification

A Coarse Aggregate Gradation Detection Method Based on 3D Point Cloud

RGB-D Based Object Segmentation in Severe Color Degraded Environment.