High Performance Acoustic Wave Nitrogen Dioxide Sensor with Ultraviolet Activated 3D Porous Architecture of Ag-Decorated Reduced Graphene Oxide and Polypyrrole Aerogel
Shuo Xiong,Jian Zhou,Jianhui Wu,Honglang Li,Wei Zhao,Chenguang He,Yi Liu,Yiqin Chen,Yongqing Fu,Huigao Duan
DOI: https://doi.org/10.1021/acsami.1c13309
2021-08-25
Abstract:Surface acoustic wave (SAW) devices have been widely explored for real-time monitoring of toxic and irritant chemical gases such as nitrogen oxide (NO2), but they often have issues such as a complicated process of the sensing layer, low sensitivity, long response time, irreversibility, and/or requirement of high temperatures to enhance sensitivity. Herein, we report a sensing material design for room-temperature NO2 detection based on a 3D porous architecture of Ag-decorated reduced graphene oxide-polypyrrole hybrid aerogels (rGO-PPy/Ag) and apply UV activation as an effective strategy to further enhance the NO2 sensing performance. The rGO-PPy/Ag-based SAW sensor with the UV activation exhibits high sensitivity (127.68 Hz/ppm), fast response/recovery time (36.7 s/58.5 s), excellent reproducibility and selectivity, and fast recoverability. Its enhancement mechanisms for highly sensitive and selective detection of NO2 are based on a 3D porous architecture, Ag-decorated rGO-PPy, p-p heterojunction in rGO-PPy/Ag, and UV photogenerated carriers generated in the sensing layer. The scientific findings of this work will provide the guidance for future exploration of next-generation acoustic-wave-based gas sensors.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13309.Synthesis process of 3D stacked porous architecture rGO-PPy/Ag, fabrication process of the SAW NO2 sensors, cross-sectional SEM image and EDS elemental mapping of rGO-PPy/Ag sensing film; high magnification TEM images of Ag NPs; size distribution of the Ag NPs, high magnification SEM images of the sensing film; AFM images of the sensing film; XRD patterns of rGO-PPy/Ag compared with PDF standard card, Raman intensity data, XPS elemental analysis, FTIR spectrum, calculation method for the limit of detection (LOD), long-term stability tests; the temperature changes of sensing film, and I–V curve of sensing film (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology