Abstract:This article discusses a novel design method of wide-beam circular polarization array antenna for satellite navigation. For special applications such as satellite navigation guiding aircraft landing, high-performance ground reference station antennas are required. In the system of satellite navigation guiding aircraft landing, the antenna of satellite navigation receiver needs to have the following radiation characteristics: the shape of antenna pattern is close to an ideal hemisphere, the upper half of space has uniform right-hand circular polarization gain, and the beam has the characteristic of sharp cutoff below 5 degrees of elevation. Whether the GNSS reference station antenna can have a wider beam circular polarization characteristic to receive more navigation satellites signal; whether it can suppress the multipath effect to a greater extent to reduce the multipath error; and whether it can work in a wider frequency band, so that several major satellite navigation systems work together, the above factors directly affect the satellite navigation and positioning accuracy of the entire system. The beam of this antenna has the following feature: sharp cutoff near the horizon for multipath mitigation at low elevation angles. Comprehensive design thereby accelerates system design. It owns wide beam, good circular polarization characteristics, low elevation angle sharp cutoff, and ultralow sidelobe radiation characteristics that achieve the purpose of receiving satellite navigation signal and multipath. The low sidelobe characteristic of the antenna is beneficial to suppress multipath effect. According to the theoretical knowledge of the symmetrical dipole and the four-arm helical antenna, the simple structure of the symmetrical element is fully utilized, and the printed balun easily realizes the dual-frequency operation of the antenna. Combined with the wide-beam circular polarization characteristic of the four-arm helical antenna structure, the shaped beam array antenna is designed. The wide-beam circularly polarized antenna unit not only covers the frequency band of the satellite navigation system but also satisfies the system performance and key feature requirements of the array antenna for the unit; that is, it satisfies the wide-beam circular polarization characteristics of the upper half space. According to the linear array basic theory and array antenna synthesis theory, Woodward Lawson sampling synthesis algorithm is used to synthesize the array amplitude and phase weights corresponding to the specific antenna pattern required for the Ground-Based Augmentation System (GBAS) engineering. The shaped beam array antenna consists of 21 units, of which 11 antenna units are directly fed, and the feeding ports of the rest are dummy ports. It is an equally spaced array antenna. The spacing between antenna units is close to half wavelength. They are fed according to the value corresponding to the excitation function. The array antenna is simulated by HFSS (High-Frequency Structure Simulator). Compared with traditional satellite navigation antennas, the antenna in this paper has excellent front-to-rear ratio and flat-top beam pattern. The results show that the wide-beam circularly polarized array antenna meets the engineering requirements of GBAS applications and lays the solid foundation for GBAS engineering applications.

Structure Design for a Large Radio Telescope Array Antenna

A shape design method of large space deployable paraboloid antenna

Structure Design and Analysis of Dual-Polarization LPDA Array

Design Of Wideband Antenna Array With Dielectric Lens And Defected Ground Structure

Structure Radio Beam Construction in Azimuthal Domain

Analysis and Design on Aperture Antenna Systems with Large Electrical Size Using Multilevel Fast Multipole Method

A Scalable Arrangement Method for Aperiodic Array Antennas to Reduce Peak Sidelobe Level

Development of a Front End Array for Broadband Phased Array Receiver

Pointing Control Design Synthesis and Integrated Design with Structure for a Flexible Space Antenna Using Beacon

A Novel Design of Flat-Top Beamforming Anti-Multipath Antenna

An optimized design for motivated broadband LPDA antenna

Space Phased Array Antenna Developments: A Perspective on Structural Design

The Electrical Design of a Membrane Antenna for Lunar-based Low-frequency Radio Telescope

Design and development of multi-band antenna array for multi-service wireless communication networks

A Novel Design of an Aperiodic Array with Grating Lobe Suppression Based on the Einstein Tile

Design of a calibratable optical antenna system based on ring array light source

Design of Extensible Structured Interferometric Array Utilizing the "Coarray" Concept

Ultrawideband, Wide Scanning Stripline-Fed Tightly Coupled Array Antenna Based on Parallel-Dipole Elements

Design and implementation of a novel wideband dual‐polarised transmitarray antenna based on tightly coupled cross dipole cells

Antenna pattern reconstruction for mid-band massive antenna array based on a single-cut field transformation algorithm in a compact multi-probe anechoic chamber setup

Design of Dual-Mode Arc-Shaped Dipole Arrays for Indoor Base-Station Applications