Abstract:A decentralized variable electric motor and fixed pump (VMFP) system with a four-chamber cylinder is proposed for mobile machinery, such that the energy efficiency can be improved by hydro-pneumatic energy storage, and problems of closed-circuit pump-controlled systems including asymmetrical flow and speed limitation are addressed. One of the chambers is arranged to the energy storage accumulator to increase energy efficiency, while the other chambers are flexibly connected to the pump ports to achieve variable transmission ratios. The piston areas of the multiple chambers are designed at first to permit a symmetric single-rod cylinder, and secondly a switching system with three operating modes is presented to expand force-velocity capabilities. Then, the four-chamber cylinder system with three solenoid valves is designed to substitute for the traditional two-chamber boom cylinder in a 6-ton excavator. A valve switching logic, as well as a feedforward and feedback compound speed controller, are presented. Simulations conducted in a 6-ton excavator model show that the maximum velocity increases by 66 %, together with asymmetrical flows to diminish the low-pressure charging accumulator. Peak power and energy consumption are both reduced by more than 20 % compared with the VMFP using the two-chamber cylinder. The energy-saving characteristics of the 6-ton excavator are emphatically analyzed considering energy storage and re-utilization. At last, experiment verifications are conducted in a lifting mechanism to verify the proposed energy-storage system.

Energy Charging and Discharging Process and the Drive Circuits Design of Automotive EC Actuators

The Design of High-Speed Powerful Solenoid Based on Giant Magnetostrictive Material and Analysis of Its Control Method

Design and Analysis of Compound Potential Energy Regeneration System for Hybrid Hydraulic Excavator.

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

Robust Control of Winding-Based DC-Bus Capacitor Discharge for PMSM Drives in Electric Vehicles

Development of an Ε-Type Actuator for Enhancing High-Speed Electro-Pneumatic Ejector Valve Performance

Application of the High-speed Switch Valve on Common Rail Direct Injection System

Optimization of Injection Solenoid Valve Drive Logic for an Electronic Diesel Engine

Research and Development on a Novel Driving Module for Injector High-Speed Solenoid Valve of High-Pressure Common Rail System

Pulsed solenoid valve and its intelligent driver in an electronic diesel fuel injection system

Study of the injection control valve in a new electronic diesel fuel system

Design of driving module and fault diagnosis for high-speed solenoid valve of diesel

Study on the response characteristics of high-speed solenoid valve drive circuit of a diesel engine

The Design and Analysis of a Hydro-Pneumatic Energy Storage Closed-Circuit Pump Control System with a Four-Chamber Cylinder

Design and performance research on the actuator of high-speed valve based on shear working mode of magnetorheological fluid

Performance optimization and testing of a novel energy coupled actuated high-speed valve based on peak-and-hold driving strategy

Development of a High Pressure Common Rail ECU Based on MPC5xx

Design of Electronically Controlled Common Rail System and Injection Characteristics Analysis

Design and Experimental Analysis of Drive Circuit for High-speed Solenoid Valve

Dynamic Response Characteristics of High-Speed, Powerful Solenoid Valve

Development of a Novel Dual-Coil Fuel Injector for Direct-Injection Spark Ignition Engines