Abstract:The potential of porous diatom silica shells as a naturally abundant low-cost sorbent for the removal of arsenic in aqueous solutions was investigated in a batch study. The objective of this work was to chemically modify the silica shells of a diatom Melosira sp. with bifunctional (thiol and amino) groups to effectively remove arsenic in its toxic As(III) form (arsenite) predominant in the aquatic environment. Sorption experiments with this novel sorbent were conducted under varying conditions of pH, time, dosage, and As(III) concentration. A maximum adsorption capacity of 10.99 mg g-1 was achieved within 26 h for a solution containing 12 mg L-1 As(III) at pH 4 and sorbent dosage of 2 g L-1. The functionalized diatom silica shells had a surface morphological change which was accompanied by increased pore size at the expense of reduced specific surface area and total pore volume. As(III) adsorption was best fitted with the Langmuir-Freundlich model, and the adsorption kinetic data using pore surface diffusion model showed that both the external (film) and internal (intraparticle) diffusion can be rate-determining for As(III) adsorption. Fourier transform infrared spectroscopy (FTIR) indicated that the thiol and amino groups potentially responsible for As(III) adsorption were grafted on the surface of diatom silica shells. X-ray photoelectron spectroscopy (XPS) further verified that this unique sorbent proceeded via a chemisorption mechanism through the exchange between oxygen-containing groups of neutral As(III) and thiol groups, and through the surface complexation between As(III) and protonated nitrogen and hydroxyl groups. Results indicate that this functionalized bioadsorbent with a high As(III) adsorption capacity holds promise for the treatment of As(III) containing wastewater.

Adsorption Removal of Dimethylsulfide on Ag-AMS Material

Metal Ion Modified Anionic Surfactant Templated Mesoporous Silica Adsorption Materials for the Removal of Dimethyl Sulfide

Enhanced Adsorption of Trivalent Arsenic from Water by Functionalized Diatom Silica Shells.

Desulfurization of Liquid Hydrocarbon Streams Via Adsorption Reactions by Silver-Modified Bentonite

Study on the Adsorption Behavior and Mechanism of Dimethyl Sulfide on Silver Modified Bentonite by in Situ FTIR and Temperature-Programmed Desorption

Comparison of adsorbents for H2S and D4 removal for biogas conversion in a solid oxide fuel cell

Amino and Quaternary Ammonium Group Functionalized Mesoporous Silica: an Efficient Ion-Exchange Method to Remove Anionic Surfactant from AMS

Adsorptive Removal of Dimethyl Disulfide from Methyl Tert-Butyl Ether Using an Ag-Exchanged Zsm-5 Zeolite

Chemical Liquid Deposition Modified ZSM-5 Zeolite for Adsorption Removal of Dimethyl Disulfide

Enhanced Removal Performance and Economical Efficiency of Volatile Organic Sulfur Compounds by Silver-Modified ZSM-5 Zeolites under a High-Humidity Environment: A Mechanistic Study of the Adsorption-Plasma Catalytic Process

Performance Characterization and Comparison Study of Silver Molecular Sieve Hydrogen Adsorbents in Liquid Hydrogen Vessels

Efficient reactive adsorption of hexamethyldisiloxane on MCM-41 supported sulfuric acid

Adsorption Desulphurisation of Dimethyl Sulphide Using Nickel-Based Y Zeolites Pretreated by Hydrogen Reduction

Adsorptive desulfurization of diesel with mesoporous aluminosilicates

Thermodynamic modeling of adsorption of dimethyl sulfide on raw and modified activated carbon by simplified local density model

Deep Desulfurization of Model Gasoline by Selective Adsorption on Ag+/Al-MSU-S

Deodorization of dimethyl sulfide using a discharge approach at room temperature

Adsorption–desorption Behavior and Mechanism of Dimethyl Disulfide in Liquid Hydrocarbon Streams on Modified Y Zeolites

Synthesis and Adsorption Performance of Ag/γ-Al2O3 with High Adsorption Capacities for Dibenzyl Disulfide

Mesoporous-molecular-sieve-supported nickel sorbents for adsorptive desulfurization of commercial ultra-low-sulfur diesel fuel

Sulfur removal from fuel using zeolites/polyimide mixed matrix membrane adsorbents