Abstract:Cross-sectional deformation of the double-ridged rectangular tube inevitably occurs in the rotary draw bending process. It has serious effect on the characteristic of microwave transmission and restricts the quality and performance of tube. Different mandrels play different roles in the bending process, so the rigid and polyvinyl chloride (PVC) mandrels are applied in the E-typed and H-typed rotary draw bending of double-ridged rectangular tube to study their influence on the cross-sectional deformation. Based on the platform of ABAQUS/Explicit, the three-dimensional finite element models for E-typed and H-typed rotary draw bending of H96 brass double-ridged rectangular tube with rigid and PVC mandrels have been established and validated by experiment. Results show that whether in the E-typed or H-typed bending, the PVC mandrel has better inhibitory effect on the cross-sectional long-side deformation δ L, short-side deformation δ W, and spacing deformation between the bottom of ridge grooves δ w of the tube. And the PVC mandrel can be more helpful to reduce the width deformation of ridge grooves of the tube in H-typed bending. The rigid mandrel can restrain the width expansion deformation of outer ridge groove of the tube more effectively in E-typed bending. However, whether using the rigid or PVC mandrel, the width shrinkage deformation of inner ridge groove of the tube in E-typed bending is less affected by the type of mandrels. And the width of two ridge grooves on sidewalls of the tube in H-typed bending also has the obvious shrinkage deformation.

Influence of Mandrel Parameters on Cross-Section Deformation of 3A21 Rectangular Tube in Rotary-Draw Bending Process

Study on Cross-Sectional Deformation of Rectangular Waveguide Tube with Different Materials in Rotary Draw Bending

A Study on Mandrel Role in Rotary Draw Bending of Rectangular Tube

Numerical simulation of influence of mandrel on wrinkling in bending of thin-walled rectangular tube

Influence of Mandrel Parameters on Cross-Sectional Deformation of H96 Double-Ridged Rectangular Tube with Ridge Groove Fillers in H-typed Rotary Draw Bending

Influence of Different Mandrels on Cross-Sectional Deformation of the Double-Ridge Rectangular Tube in Rotary Draw Bending Process

Influence of Material Parameters on Rectangular Tube Cross Section Deformation in Rotary-draw Bending Process

Experimental Study on Cross-Section Distortion of Thin-Walled Rectangular 3a21 Aluminium Alloy Tube by Rotary Draw Bending

Numerical Simulation of Effects of Mandrel on Spring-Back of Aluminum Alloy Rectangular Tube in Rotary-Draw Bending Process

Three-dimensional Finite-Elements Modeling and Simulation of Rotary-Draw Bending Process for Thin-Walled Rectangular Tube

Effect of Mandrel on Cross Section Quality of Thin-Walled Tube Numerical Controlled Bending

Research on Cross-Sectional Deformation of Double-Ridged Rectangular Tube During H-typed Rotary Draw Bending Process

Study on the Influence of Mandrel Type on Copper Tube Rotary Draw Bending

Experimental and FE Simulation Study on Cross-Section Distortion of Rectangular Tube under Multi-Die Constraints in Rotary Draw Bending Process

Finite-Elements Modeling and Simulation of Electrically-Assisted Rotary-Draw Bending Process for 6063 Aluminum Alloy Micro-Tube

Numerical Simulation on Influence of Clearance and Friction on Wrinkling in Bending of Aluminum Alloy Rectangular Tubes

Side Wrinkling Characteristics in Rotary-Draw Bending Process of Thin-Walled Rectangular 3a21 Tube

Study on the Influence of Process Parameters on Wall Thickness Variation of H96 Waveguide Tube in Rotary Draw Bending

Study on Significant Influence of Process Parameters on Wrinkling of Rotary-draw Bending Formation of Thin Walled Rectangular Tube

Forming quality of thin-walled rectangular waveguide tube during small-radius rotary draw bending under different push assistant matching conditions

Influence of Retracting Mandrel on Springback of H96 Thin-Walled Rectangular Wave-Guide Tube in Rotary Draw Bending Process