Abstract:PurposeThis paper presents a back-stepping sliding mode control method for vehicle suspension system with magnetorheological damper to obtain both the true nominal optimal suspension performance and better robustness. Through the study of control method, the acceleration of sprung mass is reduced, that is, the vertical vibration of vehicle is suppressed.MethodsA back-stepping sliding mode controller based on the establishment of the quarter-body MR suspension dynamic model, and it used the approximateskyhook-damping system as the reference model. The error dynamic equation is obtained through the MR suspension model and the reference model, and the error dynamic component is used as the back-stepping control parameter. On the premise of ensuring the system is asymptotically stable, adding the sliding mode surface to the dynamic equation of the third error subsystem can complete design of the back-stepping sliding mode controller. By constructing a magnetorheological damper experimental platform and then collecting the measured data, the improving hyperbolic tangent model of MR damper is presented. Furthermore, the Particle Swarm Optimization (PSO) method is proposed to find the improving hyperbolic tangent model’s optimal parameters to get the MR damper models.ResultsThe proposed semi-active suspension control system is rigorously proven to be input-to-state stable by virtue of Lyapunov stability theory. Through the simulation and experimental verification, it is proved that back-stepping sliding mode controller can reduce the acceleration of the sprung mass, that is, suppress the vertical vibration of the vehicle. At the same time, it is proved that the forward and inverse model of MR damper is effective, and can be applied to the hardware in the loop control experiment.ConclusionThe back-stepping sliding mode proposed in this paper is better than the seat suspension under other control and passive systems, which proves that the back-stepping sliding mode controller is effective. It also shows that the forward and inverse model of MR damper is effective.

A New Controller for the Semi-Active Suspension System with Magnetorheological Dampers

Control and Simulation of Semi-Active Suspension Based on MRF Damper

An adaptive backstepping sliding mode control strategy for the magnetorheological semi-active suspension

Sliding Mode Control of Semi-active Suspension Based on Reference Model

A New Model-Free Adaptive Sliding Controller for Active Suspension System.

On Fuzzy Control Strategy of Nonlinear Semi-Active Suspension System

Back-Stepping Sliding Mode Controller Design for Vehicle Seat Vibration Suppression Using Magnetorheological Damper

A Sliding Mode Semi-Active Control of Suspension System Subject to Uncertainties

A Sliding Mode Semi-Active Control for Suspension Based on Neural Network

Model-free adaptive sliding controller for automotive active suspensions

Adaptive Control for Suspension System of In-Wheel Motor Vehicle with Magnetorheological Damper

Sliding Mode Varying Structure Control for Semi-active Suspension

Functional Based Adaptive and Fuzzy Sliding Controller for Non-Autonomous Active Suspension System

A new optimal control law for the semi-active suspension system considering the nonlinear magneto-rheological damper model

Semi-active fuzzy cooperative control of vehicle suspension with a magnetorheological damper

Adaptive Sliding Controller with Self-Tuning Fuzzy Compensation for Vehicle Suspension Control

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

Semiactive Control Methodologies for Suspension Control With Magnetorheological Dampers

MATLAB simulation of semi-active skyhook control of a quarter car incorporating an MR damper and a fuzzy logic controller

Experimental Study on the Semi-Active Control Strategies of Magnetorheological Damper

Driving Safety Improved with Control of Magnetorheological Dampers in Vehicle Suspension