Abstract:High level aerodynamic performance has been always expected for the axial flow compressors, and it is the consistent goal for axial flow compressor research. To achieve such a goal, the incorporation of CFD with optimization algorithm and surrogate model in blade geometry optimization has become a common practice and been used extensively. But the conventional surrogate model based on merely initial sampling often deviates from the real optimization problem during optimization process and then brings the optimizer to search locally, leading to the compromised optimal results. There are yet much to do to improve such optimization design method. An optimization method of surrogate model being updated by sequential sampling strategy is developed to achieve global optimal design geometry and permit high-level of aerodynamic performance for axial flow compressor. Preliminary Kriging surrogate model is constructed with a small number of selected DOE samplings, where the multiple optimization objective functions are obtained based on CFD simulations. The optimization is performed on the surrogate model with NSGA-II optimization algorithm and Pareto fronts successively obtained. To improve the surrogate model, the MSE (Mean Squared Error) criteria is used to select the refinement point from the newest Pareto front, and it is used to update and improve the surrogate model gradually during the optimization. Such adaptive feature of the surrogate model has enabled the optimizer to search globally. The method is used to optimize transonic Rotor 37 at design flow rate, where the blade shape is varied simultaneously in terms of sweep and lean, and the geometry is optimized. In the converged Pareto front, abundant candidate designs with significant performance gains are produced. Three points over the Pareto front are selected and analyzed to take an insight into the optimization effectiveness. Overall performance curves of optimized geometries are predicted over the entire flow range and they are significantly improved compared with the original ones. Significant overall performance gains arising from the blade optimization are supported by the improved flow behavior. The overall pressure ratio or efficiency gains of the optimized blades are attributed to the significant improvement in the radial distribution of aerodynamic parameters. Further research shows that the shock structure is changed and separation zone is reduced with the optimized blades, which are the major reasons for the improvement of the aerodynamic performance of optimized blades.

An Integrated Optimization of Hypersonic Forebody/inlet Based on Surrogate Models

Optimization Design for Supersonic Inlet Structure Parameter

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

A Fast Multiobjective Optimization Approach to S-duct Scoop Inlets Design with Both Inflow and Outflow

Aerodynamic Shape Optimization of a Transonic Fan by an Adjoint-Response Surface Method

Automated Optimization Design of Hypersonic Inlet Using Genetic Algorithm

Surrogate-based aerodynamic shape optimization of hypersonic flows considering transonic performance

Dynamic multi-objective optimization of scramjet inlet based on small-sample Kriging model

Aerodynamic Optimization Design of Airfoils Based on Adaptive Kriging Surrogate Model

Multi-objective surrogate model-based optimization of a small aircraft engine air-intake duct

Three-dimensional aerodynamic optimization design method using simulated annealing and response surface model

A surrogate-based integrated framework for the aerodynamic design optimization of a subsonic wing planform shape

Surrogate Model Based Liner Optimization for Aeroengines and Comparison with Finite Elements

THREE-DIMENSIONAL BLADE SHAPE OPTIMIZATION FOR A TRANSONIC AXIAL FLOW COMPRESSOR THROUGH INCORPORATING SURROGATE MODEL AND SEQUENTIAL SAMPLING

Application of a PCA-DBN-based Surrogate Model to Robust Aerodynamic Design Optimization

Multi-objective optimization design of the intake duct for a waterjet system

Design Methodology of the Hypersonic Axisymmetric Forebody

Multi-Objective Aerodynamic Optimization of External Compression Supersonic Intake using Kriging/MOGA