Abstract:In structural deformation monitoring, traditional methods are mainly based on the deformation data measured at several individual points. As a result, only the discrete deformation, not the overall one, can be obtained, which hinders the researcher from a better and all-round understanding on the structural behavior. At the same time, the surrounding area around the measuring structure is usually complicated, which notably escalates the difficulty in accessing the deformation data. In dealing with the said issues, a digital image-based method is proposed for the overall structural deformation monitoring, utilizing the image perspective transformation and edge detection. Due to the limitation on camera sites, the lens is usually not orthogonal to the measuring structure. As a result, the obtained image cannot be used to extract the deformation data directly. Thus, the perspective transformation algorithm is used to obtain the orthogonal projection image of the test beam under the condition of inclined photography, which enables the direct extraction of deformation data from the original image. Meanwhile, edge detection operators are used to detect the edge of structure’s orthogonal projection image, to further characterize the key feature of structural deformation. Using the operator, the complete deformation data of structural edge are obtained by locating and calibrating the edge pixels. Based on the above, a series of load tests has been carried out using a steel–concrete composite beam to validate the proposed method, with the implementation of traditional dial deformation gauges. It has been found that the extracted edge lines have an obvious sawtooth effect due to the illumination environment. The sawtooth effect makes the extracted edge lines slightly fluctuate around the actual contour of the structure. On this end, the fitting method is applied to minimize the fluctuation and obtain the linear approximation of the actual deflection curve. The deformation data obtained by the proposed method have been compared with the one measured by the dial meters, indicating that the measurement error of the proposed method is less than 5%. However, since the overall deformation data are continuously measured by the proposed method, it can better reflect the overall deformation of the structure, and moreover the structural health state, when compared with the traditional “point” measurements.

A Method of Deformation Trend Fitting Based on the Variable Bandwidth Kernel Weighted Estimation

Load Spectra Extrapolation by Bandwidth-Optimized Kernel Density Estimation Based on DBSCAN Algorithm

Deformation Prediction Model of Large-Span Prestressed Structure for Health Monitoring Based on Robust Gaussian Process Regression

The Application of Multi-Wavelet Theory in Deformation Monitoring Data Processing

The Deformation Model Research Based on Wavelet Modular Maximum Improved Algorithm

A Real-Time Spatial Deformation Estimation Method Based on Spatial Curvature Decomposition and Interpolation

Hydrostatic Seasonal State Model for Monitoring Data Analysis of Concrete Dams

Applications of Weighted Regression Model and Weighted GM in Slope Deformation Forecast

Dam deformation early warning model based on cluster analysis and spatiotemporal data fusion

Deformation similarity characteristics-considered hybrid panel model for multi-point deformation monitoring of super-high arch dams in operating conditions

Statistical analysis of long-term deformations and determination of warning thresholds for near-dam reservoir bank slopes

Deformation Information Extraction from Multi-GNSS Coordinate Series Based on EWT-ICA-R

Comparison analysis of multiwavelet based on different pretreatment methods in deformation monitoring data processing

A study on dam deformation monitoring index based on wavelet transformation and characteristic polynomial root of an auto-regression model

Deformation Vector Distribution Model in Dam Safety Monitoring

An Overall Deformation Monitoring Method of Structure Based on Tracking Deformation Contour

Residual correction-based dam deformation monitoring method via data dimension reduction and optimized Bi-LSTM algorithm

Four Kinds of Statistical Models Used in Monitoring Data Analysis of Pendulum Wire Deformation

A combination model for evaluating deformation regional characteristics of arch dams using time series clustering and residual correction

Spatiotemporal Clustering Analysis and Zonal Prediction Model for Deformation Behavior of Super-High Arch Dams

Data Adaptive Analysis on Vertical Surface Deformation Derived from Daily ITSG-Grace2018 Model