Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

Design and Simulation Analysis on Vibration Attenuation Structure of MIMU

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Design and Research on UAV Vibration Resistance Module

Modeling and analysis of a viscoelastic micro-vibration isolation and mitigation platform for spacecraft

MICRO-VIBRATION SUPPRESSION OF EQUIPMENT SUPPORTED ON A SANDWICH BEAM INCORPORATING MAGNETO-RHEOLOGICAL ELASTOMER (MRE) CORE

Error Compensation for MIMU under Random Vibration

Modeling and Analysis of Bio-Inspired, Reconfigurable, Piezo-Driven Vibration Isolator for Spacecraft

Dynamic Performance Improving of MEMS Sensor By Gas Damping Structure

Design and Experimental Study of a Hybrid Micro-Vibration Isolation System Based on a Strain Sensor for High-Precision Space Payloads

A 2-collinear-DoF strut with embedded negative-resistance electromagnetic shunt dampers for spacecraft micro-vibration

Analysis and active control of bending and vibration responses of the MRE multifunctional grid composite sandwich plates

Analytical Method and Experimental Verification of Coupled Micro-Vibration for Spacecraft Based on Mechanical Impedance Theory

Study and Simulation of Vehicle Suspension System

Design and calibration of MIMU based on chip size micro inertial sensors

Benefit of Relaxation-Type Damping on the Performance of a Six-Degree-of-Freedom Microvibration Isolation Device for Control Moment Gyroscope

Vibration suppression of a meta-structure with hybridization of Kresling origami and waterbomb-based origami

Structural vibration mitigation via an inertial amplification mechanism based absorber

Study of combined vibration-suppression method for vehicle vertical comprehensive performance

Coupled Dynamic Analysis and Decoupling Optimization Method of the Laser Gyro Inertial Measurement Unit