Abstract:The cross-shaped stiffened concrete-filled steel tubular stub column is constructed by incorporating steel reinforcement ribs into the traditional cross-shaped design, which helps delay the buckling of the steel tube and enhances its restraining effect on the concrete. However, existing standards and research proposed design methods for estimating the post-fire bearing capacity of steel reinforced concrete stub columns are primarily applicable to the ordinary steel tubes with conventional thickness and sections. Therefore, it is necessary to investigate the axial compressive properties of high-strength concrete stub columns with irregular thin-walled steel tubes after exposure to fire, which can contribute to their potential future application. Effects of various experimental parameters, such as heating time, width-thickness ratio, and longitudinal spacing of stiffeners were investigated. In total one specimen subjected to ambient temperature and eight cross-shaped stiffened concrete-filled steel tubular stub columns subjected to fire conditions were prepared for measuring temperature-time curves of specimens during ISO-834 standard fire, load-displacement curves, load-transverse, and longitudinal strain curves of specimens under axial compression loading. The failure modes of the specimens were recorded, and the influence of each parameter on the post-fire mechanical properties of the specimens was analyzed based on the experimental results. ABAQUS software was utilized to develop a model for post-fire analysis, which was validated by comparing it with experimental data. After validation, the model was used to analyze the underlying mechanism, and a comprehensive parametric study of members was conducted. Based on the results of the parametric study and the model developed for calculating bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column at ambient temperature, a simplified equation accounting for the effects of elevated temperature was proposed to predict the residual bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column after fire exposure. The average error between the simplified formula and the finite element simulation results is 0.925, and the mean square error is 0.085.

Analysis of Detection and Inspection for Steel Structure after Fire

Analysis and Repair on the Damaged Steel Structure after Fire

Damage Detection and Safety Assessment on Bridge 5tructure after Fire Accident

DAMAGE ACCUMULATION, FRACTURE AND POST FRACTURE ANALYSES FOR INITIALLY FLAWED STEEL STRUCTURES

RESEARCH ON POST-FIRE PERFORMANCE OF STRUCTURAL STEELS

Analysis On Global Mechanics Properties Of Large-Space Steel Structures Under Fire Conditions

Advances in Study on Fire Resistance of Steel Structures

PERFORMANCE-BASED ANTI-COLLAPSE ANALYSIS OF THE LARGE-SPACE STEEL LATTICE TRUSS STRUCTURE UNDER FIRE

Analysis on Global Mechanical Properties of Portal Frame Steel Structures

Analysis on resistance on and after exposure to standard fire of short centrifuge concrete-filled steel tubular colunms

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

STUDY ON PERFORMANCE-BASED FIRE-RESISTING DESIGN AND KEY TECHNOLOGIES FOR LARGE SPATIAL STEEL STRUCTURES

Application of non-destructive testing technology in construction steel structure industry

STABILITY LIMIT STATE ANALYSIS OF STEEL STRUCTURAL MEMBER UNDER FIRE

Experimental and numerical investigation on mechanical behavior of Q355 steel and connections in fire conditions

Dynamic progressive collapse of steel moment frames under different fire scenarios

Recent advances in fire–structure analysis

The mechanical response analysis of a super tall concrete structure under fire

Research on the Development of Intelligent Fire Inspection System for Construction Engineering

Seismic Performance of Concrete-Filled Double-Skin Steel Tubes after Exposure to Fire: Analysis

Development of the Research on Fire-Resistance of Structures