Abstract:A six degree-of-freedom (DOF) motion control system for docking with a deep submergence rescue vehicle (DSRV) test platform was the focus of this study. The existing control methods can meet the general requirements of underwater operations, but the complex structures or multiple parameters of some methods have prevented them from widespread use. The majority of the existing methods assume the heeling effect to be negligible and ignore it, achieving motion control in only four or five DOFs. In view of the demanding requirements regarding positions and inclinations in six DOFs during the docking process, the software and hardware architectures of the DSRV platform were constructed, and then sparse filtering technology was introduced for data smoothing. Based on the adaptive control strategy and with a consideration of residual static loads, an improved S-plane control method was developed. By converting the force (moment) calculated by the controller to the body coordinate system, the complexity of thrust allocation was effectively reduced, and the challenge of thrust allocation in the case of a high inclination during dynamic positioning was solved accordingly. The automatic control of the trimming angle and heeling angle was realized with the linkage system of the ballast tank and pump valve. A PID method based on an intelligent integral was proposed, which not only dealt with the integral "saturation" problem, but also reduced the steady-state error and overshooting. Water pool experiments and sea trials were carried out in the presence of water currents for six-DOF motion control. The responsiveness and precision of the control system were verified by the pool experiment and sea trial results and could meet the control requirements in engineering practice. The reliability and operational stability of the proposed control system were also verified in a long-distance cruise.

Control System Design for Self-propelled Model of a New Concept Submerging and Surfacing Platform

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Simulation and preliminary experimental results on S-surface control of an autonomous underwater vehicle based on MOOS-IvP

Locating, Trajectory Planning and Control of an Underwater Propeller Cleaning Manipulator

Electromechanical Control and Stability Analysis of A Soft Swim-Bladder Robot Driven by Dielectric Elastomer

A Pressure-Displacement Control for an Active-Passive Hybrid Compensation System

Modeling and Extended State Observer-Based Backstepping Control of Underwater Electro Hydrostatic Actuator with Pressure Compensator and External Load

Hardware in the Loop Simulation and Control Design for Autonomous Free Running Ship Models

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

Design and Implementation of Small Modular Amphibious Robot System

The Design of Control System Based on Autonomous Underwater Helicopter

Design of Semi Physical Simulation Platform for Autonomous Underwater Vehicle

Investigation and Design of the Integrated Ship Control System

Control System Design for a Surface Cleaning Robot

Dynamics Modeling and Motion Control of an New Unmanned Underwater Vehicle

Design and Verification of Deep Submergence Rescue Vehicle Motion Control System

Shallow sea undulating towed-vehicle's control system

Research on Control Algorithm of Unmanned Surface Vehicle Line Tracking Based on FPGA

Submarine depth and pitch control based on closed-loop gain shaping algorithm

Motion Control System for USV Target Point Convergence

An Interactive Simulation Platform Design For Analyzing Ship Steer System