Anisotropic swelling behaviour of unsaturated compacted GMZ bentonite hydrated under vertical stresses
Yu Lu,Wei-Min Ye,Qiong Wang,Yuan-Hong Zhu,Yong-Gui Chen,Bao Chen
DOI: https://doi.org/10.1007/s10064-021-02261-y
IF: 4.2
2021-05-05
Bulletin of Engineering Geology and the Environment
Abstract:Bentonite has been considered as a potential buffer/backfill material for construction of engineering barriers in deep geological repository for disposal of high-level nuclear waste. Anisotropy will be inevitably generated during static compaction during preparation of bentonite blocks, leading to induce possible influences on buffering function formation of the engineering barrier system and even the safety of the whole repository. In the present work, swelling deformation tests along the directions both perpendicular and parallel to the compaction plane were conducted on unsaturated compacted GMZ bentonite specimens using a self-developed lateral confined swelling test setup. Influences of initial dry density and vertical pressure on the final swelling strain and its anisotropy, as well as the mechanism of evolution of anisotropy coefficient on hydration, were analysed. Results demonstrate that the swelling time, average strain rate and final swelling strain increase with increasing initial dry density and decrease with increasing vertical pressure. Meanwhile, the swelling strain along the perpendicular direction is much higher than that along the parallel direction, exhibiting an obvious anisotropic swelling characteristic. The anisotropy coefficient is relatively large at the initial swelling stage, and then gradually decreases to be stabilised. The final anisotropy coefficient increases with initial dry density and decreases with vertical pressure.
engineering, environmental,geosciences, multidisciplinary, geological