Abstract:Ammonia (NH3) as a carbon-free fuel is gaining much attention in the shipping industry for its enormous po-tential of global decarbonization, which is expected to achieve large-scale applications in marine engines by dual-fuel (DF) combustion technology. As such, this study was conducted to explore the emission reduction potential of NH3/diesel DF combustion strategy via low-pressure gas injection in large low-speed two-stroke marine engines using computational fluid dynamics (CFD) modeling coupled with chemical kinetics. An estab-lished in-house CFD platform, KIVA-CHEMKIN-CDAC, was employed to perform engine simulations, while an DF combustion mechanism was constructed in this work to mimic the oxidation behaviors of NH3 and diesel as well as the emissions formation. It was found that NH3 admission exhibits a significant inhibiting effect on the autoignition of pilot fuel. Increasing ammonia substitution ratio (ASR) will prolong the ignition delay, resulting in high intensity of premixed combustion. Generally, NH3/diesel DF combustion mode shows two-stage heat release shape. The first stage is characterized by the premixed combustion of diesel-NH3-air mixtures, whereas the dominant combustion regime of the second stage highly depends on the NH3 concentration in the premixed charge. In the very lean NH3-air mixtures, the second stage corresponds to the mixing-controlled diffusion combustion phase; but for the richer NH3-air mixtures, it could be controlled by the turbulent flame propagation. NOx emission decreases when the ASR does not exceed 40%, otherwise increases significantly. The former is probably due to the Thermal DeNOx process dominated by NH2 + NO = N2 + H2O, while the latter is due to the fuel-bound nitrogen. As expected, CO2 emission is reduced monotonically for the same total fuel energy with the increase of ASR, confirming that the utilization of zero-carbon fuel is the most direct means to reduce CO2 emissions. Moreover, there is a trade-off relationship between NOx and N2O emissions. This is because N2O formation usually occurs at lower temperatures (i.e., T < 1400 K). Furthermore, advancing the pilot-fuel in-jection timing could reduce the unburned NH3 and N2O emissions. Therefore, optimization of injection timing can achieve lower emissions while maintain higher efficiency.

Effects of Split Injection Strategy on Combustion Characteristics and Nox Emissions Performance in Dual-Fuel Marine Engine

Impact of Pilot Injection on Combustion and Emission Characteristics of a Low-Speed Two-Stroke Marine Diesel Engine

Research on the Ignition Strategy of Diesel Direct Injection Combined with Jet Flame on the Combustion Character of Natural Gas in a Dual-Fuel Marine Engine

Optimization of direct injection mixture formation for dual-fuel low speed marine engine using novel compound electric gas injection devices

A Numerical Investigation on the Effects of Intake Swirl and Mixture Stratification on Combustion Characteristics in a Natural-Gas/Diesel Dual-Fuel Marine Engine

Effect of split injection strategy of diesel fuel on multi-stage heat release and performance of a RCCI engine fueled with diesel and natural gas

Study on Characteristics Optimization of Combustion and Fuel Injection of Marine Diesel Engine

Numerical Investigation of Two-Stroke Marine Diesel Engine Emissions Using Exhaust Gas Recirculation at Different Injection Time

Numerical study of injection strategies for marine methanol/diesel direct dual fuel stratification engine

Effects of Split Injection Strategy on the Combustion, Emission and Economic Performance of the Low-Octane Gasoline Fueled MPCI Engines

Experimental study on in-cylinder combustion and exhaust emissions characteristics of natural gas/diesel dual-fuel engine with single injection and split injection strategies

Experimental Optimization of Natural Gas Injection Timing in a Dual-Fuel Marine Engine to Minimize GHG Emissions

Effects of fuel reforming on large-bore low-speed two-stroke dual fuel marine engine combined with EGR and injection strategy

Effect of direct water injection on combustion and emissions characteristics of marine diesel engines

Investigation on the Potential of Using Carbon-Free Ammonia in Large Two-Stroke Marine Engines by Dual-Fuel Combustion Strategy

Performance and emission evaluation of a marine diesel engine fueled with natural gas ignited by biodiesel-diesel blended fuel

Investigation on efficient and clean combustion pre-injection strategy of a diesel/methanol dual direct-injection marine engine under full load

The effect of ignition diesel injection conditions on the combustion process of natural gas engine

Numerical Study of the Effect of Direct-Injection Timing of Methanol and Excess Air Ratio on the Combustion Characteristics of a Marine Diesel-Methanol Dual-Fuel Engine

A Numerical Investigation on Mixing Characteristics of Natural Gas Jets With High-Pressure Injection

Split injection strategies for a high-pressure hydrogen direct injection in a small-bore dual-fuel diesel engine