Abstract:Global warming requires a shift in the energy economy towards renewable energy sources, such as solar and wind energy, to meet the ever-increasing worldwide energy demand while having lesser negative impact on the environment. The integration of such sustainable energy resources into the existing infrastructure, however, is challenging due to their fluctuations and intermittences requiring the development of efficient (intermediate) energy storage systems. The ultimate goal for these systems pertains to high performance, durability, safety, facile scalability, cost, and environmental-friendliness. The aqueous rechargeable zinc-iodine (Zn-I 2 ) battery is promising due to the high theoretical capacities of Zn (820 mAh g Zn -1 ) and I 2 (211 mA h g I2 -1 ) along with the very high solubilities in aqueous media. Other advantages include the abundance of the electrode materials and the safety of the aqueous electrolyte. The high energy density of aqueous zinc-based batteries is a result of the multi-electron redox reactions and the low electrochemical potential of Zn (-0.763 V vs. RHE) in mildly acidic electrolytes such as in a Zn-I 2 battery. In addition, compared to other alkali metals such as lithium, sodium, and potassium, metallic Zn is relatively stable in an aqueous environment over a wide temperature range. Several challenges need to be addressed for Zn-I 2 batteries to be competitive; namely, self-discharge, sluggish kinetics, low practical energy density, as well as the dendrite formation on the Zn anode. In this work, we design a high-performance Zn-I 2 battery with an unusual long-term stability which is based on a novel design of electrodes and electrolyte. In detail, a three-dimensional functionalized graphene cathode facilitates the iodide redox reactions and also immobilizes dissolved polyiodides; thus, suppressing the detrimental shuttling effect. Furthermore, we design a composite anode made of Zn coated with a film of reduced graphene oxide. This modification significantly enhances the performance and stabilizes the anode during repeated Zn stripping/plating preventing dendrite formation. The electrolyte is formulated in a way that, along with the graphene-based cathode, allows for the utilization of an economical glass fiber separator instead of the commonly employed ion-exchange membranes, which are expensive and have relatively high ohmic resistances. Our novel Zn-I 2 battery design exhibit high current efficiencies of nearly 100%, along with stable specific capacities of 257, 186, 150, 84 mAh g -1 at corresponding current densities of 1, 2, 5, 10 A g -1 . Furthermore, a long-term capacity retention of 96.7% at 5 A g -1 over 2000 cycles is achieved, outperforming most comparable aqueous batteries.

Sustainable ultra-long cycle life aqueous Zn-I2 battery without ion-selective membrane

Weakly Solvating Effect Spawning Reliable Interfacial Chemistry for Aqueous Zn/Na Hybrid Batteries

Interfacial Modification of a Zn Anode by Amorphous Se toward Long-Life and Hydrogen Evolution-Free Aqueous Rechargeable Batteries

Long-Life Aqueous Zn-I2 Battery Enabled by a Low-Cost Multifunctional Zeolite Membrane Separator.

Dendrite-free aqueous Zn-ion batteries via a multifunctional Se protective layer

Mass-producible in-situ amorphous solid/electrolyte interface with high ionic conductivity for long-cycling aqueous Zn-ion batteries

Boosting Zn||I2 Battery’s Performance by Coating a Zeolite-Based Cation-Exchange Protecting Layer

Interface engineering enables stable and reversible zinc anode for high-performance Zn–I2 battery

In Situ Synthesis of Cathode Materials for Aqueous High-Rate and Durable Zn–I2 Batteries

In Situ Constructing Coordination Compounds Interphase to Stabilize Zn Metal Anode for High‐Performance Aqueous Zn–SeS 2 Batteries

An Ion Exchange Membrane-Free, Ultrastable Zinc-Iodine Battery Enabled by Functionalized Graphene Electrodes

Anti‐swelling Microporous Membrane for High‐capacity and Long‐life Zn–I2 Batteries

Zinc anode stabilized by an organic-inorganic hybrid solid electrolyte interphase

Stable zinc anode with ionic conductive interface layer for high performance aqueous zinc-ion batteries

Highly Stable Zinc Anodes Enabled by a Dual-Function Additive of In-Situ Film Formation and Electrostatic Shielding

Sulfonate-functionalization in Zn-iodine batteries as one stone kills two birds: iodine limiter and uniform Zn plating guidance layer

A Facile In Situ Etching–coating of Artificial Solid‐Electrolyte Interphase on Zn Metal Anode for Aqueous Batteries

ZnSe Modified Zinc Metal Anodes: Toward Enhanced Zincophilicity and Ionic Diffusion

Establishing Ultralow Self‐Discharge Zn‐I2 Battery by Optimizing ZnSO4 Electrolyte Concentration

Ultra‐Stable Aqueous Zinc Anodes: Enabling High‐Performance Zinc‐Ion Batteries via a ZnSiF6‐Derived Protective Interphase

Rational Electrode–Electrolyte Design for Long-Life Rechargeable Aqueous Zinc-Ion Batteries