Abstract:Improving the integrity of precast concrete (PC) frame structures using dry connections is essential for enhancing their robustness against progressive collapse. Therefore, three PC beam–column assemblies using different dry connections specially designed to ensure the connectivity were experimentally examined under progressive collapse scenarios. And a seven-point loading tree device was adopted to simulate the uniformly distributed loading conditions in practical engineering. The connection details were classified as follows: normal top-and-seat angle connection in TSA, strengthened top-and-seat angle connection in STSA, and strengthened top-and-seat angle with high ductility longitudinal reinforcements in the plastic regions in DSTSA. Under small deformations, STSA had the highest first peak load attributable to its strengthened joint connection. TSA obtained a lower load than that of STSA because of the low joint connection stiffness. Meanwhile, DSTSA achieved the lowest load among the three specimens because the smoother surface of the high-ductility reinforcements (compared with that of normal ones) weakened its bond to the concrete. However, under large deformations, the high ductility of the reinforcements ensured the specimen integrity; consequently, the largest final load was achieved in DSTSA. On the contrary, the high joint stiffness and normal reinforcements in STSA hindered the beam end rotation, and the steel angle failed early in TSA. As a result, the two connections failed to ensure the specimen integrity. To further shed light on the resistance mechanisms of beam–column assemblies under the uniformly distributed loading condition, an iteration-based model was developed to calculate the first peak load under the beam and compressive arch actions. The maximum prediction error achieved was 12%. Based on the model, the load contribution from the friction effect of the loading device was identified as 27%. And it was found that during the collapse, increasing reinforcement deformation region that might be induced by slippage between the concrete and reinforcements could lead to a continuous increase in the horizontal reaction force after the specimen reaching the first peak load.

Performance of Practical Beam-to-shs Column Connections Against Progressive Collapse

EXPERIMENTAL STUDY ON PROGRESSIVE COLLAPSE BEHAVIOR OF BEAM-TO-COLUMN ASSEMBLIES WITH ASYMMETRIC SPAN

Failure Modes and Robustness of Beam-to-column Joints for Steel Tubular Frame Resisting Progressive Collapse

Experimental Investigation of Beam-to-tubular Column Moment Connections under Column Removal Scenario

Performance of Different Stiffness Connections Against Progressive Collapse

A Special Reinforcing Technique to Improve Resistance of Beam-to-tubular Column Connections for Progressive Collapse Prevention

Research on the resistance of modified bolted connection under progressive collapse scenario

Anti-collapse Performances of Steel Beam-to-column Assemblies with Different Span Ratios

Progressive Collapse Mechanism Analysis of Concrete-Filled Square Steel Tubular Column to Steel Beam Joint with Bolted–Welded Hybrid Connection

Experimental Study on Anti-collapse Performance of Beam-column Substructure with Welded Flange-bolted Web Connection in Minor-axis Direction

Analysis of anti-collapse performance for beam-to-column assembly with bolt and weld connection of steel frame

Progressive collapse performance analysis of concrete-filled square steel tubular column to composite beam with outer ring plate connection

Anti-collapse performance of steel frames with RWS connections under a column removal scenario

Experimental and numerical investigation on the anti-progressive collapse performance of fabricated connection with CFST column and composite beam

Anti-progressive Collapse Behavior of Beam-to-column Assemblies with Bolted-Angle Connections under Different Span Ratios

Progressive collapse mechanism for H-beam-concrete-filled steel tubular column connections with steel inner-diaphragm joints

Progressive collapse resistance of precast concrete beam–column assemblies using dry connections under uniformly distributed loading condition

Progressive Collapse Behaviour of Steel Framed Substructures with Various Beam-Column Connections

Details of H-Beam-to-RHS Column Joints with Through Diaphragm for Progressive Collapse Prevention

Progressive Collapse Analysis of Concrete-filled Steel Tubular Column to Steel Beam Connections Using Multi-scale Model

Difference Analysis of the Collapse Behaviors of the Single-Story Beam-Column Assembly and Multi-Story Planar Frame