Abstract:Metal supported solid oxide fuel cells (MS-SOFC) possess several advantages like good mechanical property, easy assembling, fast start-up and capability to maintain redox stable due to fuel leakage. However, it has been a critical challenge to deposit cathode on the metal supported cell in the oxidizing atmosphere, which is mainly limited by the low calcination temperature yielding vulnerable electrolyte-electrode interface. The cathodes prepared in the protecting atmosphere are also not satisfied, instead it will increase the complexity of the cell fabrication process. Lower down the cathode deposition temperature using aqueous infiltration has become one of the optimized methods for MS-SOFC. Also, we have proposed an alternative way for the fabrication of metal supported single cell with robust cathode through whole cell reduction. Here, we present results of both above two approaches for the fabrication of nano-structured cathodes in MS-SOFC. The cells in this study are based on Fe-Ni (1:1 in mol ratio) support, Fe-Ni/YSZ anode and YSZ electrolyte prepared through tape-casting, thermal isostatic pressing and co-firing. As illustrated in the following schematic configuration, La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) cathodes were deposited in the porous YSZ layer of the pre-reduced Ni-Fe|Ni-Fe-YSZ||YSZ||P-YSZ substrate by infiltration and fired at the cell operation temperature around 700 oC. A-site deficiency of ~4-8% was introduced into LSCF cathode and was expected to enhance the sintering activity of LSCF nano particles at low calcination temperature and to enhance the cathode performance by the excess cobalt and iron oxide at LSCF surface. As in the second approach, Sr0.95Ti0.3Fe0.63Ni0.07O3-δ – Gd0.1Ce0.9O1.95 (STFNi-GDC) graded cathode will be screen printed on the NiO-Fe2O3|NiO-Fe2O3-YSZ||YSZ|GDC substrate and fired at high temperature in air as normal cathode preparation procedure. Then the whole cell will be reduced in H2-Ar to obtain Fe-Ni alloy support and reduced STFNi cathode with in-situ exsolved (Fe,Ni) alloy nano particles anchored in the oxide surface. During the cell test, the reduced STFNi-(Fe,Ni) will be re-oxidized in air, forming the surface decorated iron and cobalt oxide particles, which were presumably to be expected to increase the cathode performance through improvement of oxygen surface exchange coefficient. Figure 1

Fabrication of a High-Performance Nano-Structured Ln1−xSrxMO3−δ (ln = La, Sm; M = Mn, Co, Fe) SOC Electrode Through Infiltration

Fabrication of A High-Performance Nano-Structured Ln(1-X)Sr(X)Mo(3-Delta) (ln = La, Sm; M = Mn, Co, Fe) Soc Electrode Through Infiltration

Fabrication and Electrochemical Performance of Nanofibrous Micro-Frameworks of Α-Mno2

Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

Nanoscale Intertwined Biphase Nanofiber as Active and Durable Air Electrode for Solid Oxide Electrochemical Cells

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Tuning layer-structured La<sub>0.6</sub>Sr<sub>1.4</sub>MnO<sub>4+δ</sub> into a promising electrode for intermediate-temperature symmetrical solid oxide fuel cells through surface modification

A porous TiC supported nanostructured complex metal oxide ceramic electrode for oxygen evolution reaction

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Development of Nanostructured Lanthanum Strontium Cobalt Ferrite/Gadolinian-Doped Ceria Composite Electrodes of Solid Oxide Cells Formed by In Situ Polarization

Enhanced Electrocatalytic Activity of SrFe0.9Nb0.1O3-δ Through In-situ Synthesis of Sr3Fe1.8Nb0.2O7-δ Coating

One-Dimensional La0.2Sr0.8Cu0.4Co0.6O3−δ Nanostructures for Efficient Oxygen Evolution Reaction

In-Situ Formation of Nano-Structured Cathode on Metal Supported SOFC

Inlaying Ultrathin Bimetallic MOF Nanosheets into 3D Ordered Macroporous Hydroxide for Superior Electrocatalytic Oxygen Evolution

Activating Octahedral Center in Co‐Doped NiFe2O4 via Bridging Amorphous MoSx for Electrocatalytic Water Oxidation: A Case for eg Orbital Regulation in Spinel Oxide

Fabrication and Characterization of Oxygen-Carbon-Contained CrMnFeCoNi Coatings Electrodeposited in DMF-CH3CN Solution with and Without Supporting Electrolyte LiClO4

Co‐MOF as Stress‐Buffered Architecture: An Engineering for Improving the Performance of NiS/SnO2 Heterojunction in Lithium Storage

Fabrication Of High Performance Oxygen Sensors Using Multilayer Oxides With High Interfacial Conductivity

Rational design of an in-situ co-assembly nanocomposite cathode La0.5Sr1.5MnO4+δ-La0.5Sr0.5MnO3-δ for lower-temperature proton-conducting solid oxide fuel cells

Reconstruction and optimization of LSCF cathode microstructure based on Kinetic Monte Carlo method and Lattice Boltzmann method

Rational Design of a N,S Co-Doped Supermicroporous CoFe-Organic Framework Platform for Water Oxidation