ChemInform Abstract: Synergistic Effect of SnO2/ZnWO4 Core—Shell Nanorods with High Reversible Lithium Storage Capacity.

Lili Xing,Shuang Yuan,Bin He,Yayu Zhao,Xiaoling Wu,Xinyu Xue

DOI: https://doi.org/10.1002/chin.201339017

2013-01-01

ChemInform

Abstract:SnO 2 /ZnWO 4 core—shell nanorods are prepared by a two‐step method.

What problem does this paper attempt to address?

Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

yue qi,hui zhang,ning du,chuanxin zhai,deren yang

DOI: https://doi.org/10.1039/c2ra21765a

IF: 4.036

2012-01-01

RSC Advances

Abstract:This paper describes a facile hydrothermal and subsequent carbonization approach for the synthesis of Co3O4@SnO2@C core-shell nanorods. The as-synthesized Co3O4@SnO2@ C nanorods have been applied as anode materials for lithium-ion batteries, which exhibit improved cyclic performance and enhanced power capability. Both Co3O4 and SnO2 are electrochemically active materials, and the hybridization of Co3O4 and SnO2 into an integrated core-shell nanorod structure makes them an elegant synergistic effect when participating in the lithium-ion charge-discharge process. In addition, the carbon matrix has good volume buffering effect and high electronic conductivity, which may be responsible for the improved electrochemical performance.
Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Hongwen Chen,Yangdan Lu,Hangjian Zhu,Yichuan Guo,Rui Hu,Rabia Khatoon,Lingxiang Chen,Yu-Jia Zeng,Lei Jiao,Jianxing Leng,Jianguo Lu

DOI: https://doi.org/10.1016/j.electacta.2019.04.134

IF: 6.6

2019-01-01

Electrochimica Acta

Abstract:Tin oxide (SnO2) is an attractive anode in lithium ion batteries (LIBs), but its applications have been significantly hampered by the huge volume change during the electrochemical cycling. In this work we demonstrate a rational design of crystalline SnO2@amorphous TiO2 core-shell nanostructures, where the crystalline SnO2 core was synthesized by a hydrothermal method and the amorphous TiO2 shell was deposited by atomic layer deposition. The SnO2@TiO2 nanostructures deliver excellent performances during the electrochemical process, having a high reversible capacity of 1259 mAh g(-1) at cycling rate of 80 mA g(-1), which is still up to 703 mAh g(-1) after 50 cycles. The acceptable rate capacity is also revealed with 412 mAh g(-1) at 400mA g(-1). The coulombic efficiency is stable at around 100% regardless of cycling rates and numbers. The electrochemical performances of the SnO2@TiO2 batteries are better than those of the SnO2 ones without TiO2 coating. In the SnO2@TiO2 nanostructures, the amorphous TiO2 shell layer can experience an isotropic stress, having the ability to evidently reduce the volume change, lattice stress and so the risk of fracture during the cycling process, which is responsible for their outstanding behaviors. The strategy provided in our study is expected to be a precious guideline for designing an ideal electrode for energy storage devices. (c) 2019 Elsevier Ltd. All rights reserved.
SnO2/NiO core-shell nanobelts and their high reversible lithium storage capacity arising from synergisticeffect

Lili Xing,Chunxiao Cui,Bin He,Yuxin Nie,Ping Deng,Xinyu Xue

DOI: https://doi.org/10.1016/j.matlet.2013.01.030

IF: 3

2013-01-01

Materials Letters

Abstract:SnO2/NiO core-shell nanobelts have been synthesized simply by coating NiO nanobelts with a thin layer of SnO2 nanoparticles. As the anode material of lithium-ion battery, SnO2/NiO core-shell nanobelts exhibit higher reversible capacity (∼900mAh/g at C/20 rate) and better cycling performance than individual NiO or SnO2 materials. The excellent performance can be attributed to the synergistic effect between SnO2 and NiO. Our results demonstrate the potential applications of SnO2/NiO core-shell nanobelts in high-performance lithium-ion batteries.
Zn2geo4@C Core-Shell Nanorods As Highly Reversible Anode Materials for Lithium-Ion Batteries

Yifan Chen,Yangfan Lin,Ning Du,Chengmao Xiao,Shali Wu,Yaguang Zhang,Deren Yang

DOI: https://doi.org/10.1002/ente.201700058

IF: 4.149

2017-01-01

Energy Technology

Abstract:We report the synthesis of Zn2GeO4 nanorods using a simple hydrothermal process. After the coating of a carbon layer by the thermal decomposition of acetylene gas, the Zn2GeO4@C core-shell nanorods were obtained. The as-synthesized Zn2GeO4@C core-shell nanorods were used as anode materials of lithium-ion batteries, which showed good cycling and rate performance. A highly reversible specific capacity of 718 mAhg(-1) after 400 cycles was achieved at a current density of 400 mAg(-1). The core-shell nanostructures and partially amorphous and porous nanostructures helped to alleviate the volume change and enhance the conductivity during the charge/discharge process, which may be responsible for the good performance.
Synthesis of Co2SnO4@C core-shell nanostructures with reversible lithium storage

Yue Qi,Ning Du,Hui Zhang,Ping Wu,Deren Yang

DOI: https://doi.org/10.1016/j.jpowsour.2011.08.085

IF: 9.2

2011-01-01

Journal of Power Sources

Abstract:This paper reports the synthesis of Co2SnO4@C core-shell nanostructures through a simple glucose hydrothermal and subsequent carbonization approach. The as-synthesized Co2SnO4@C core-shell nanostructures have been applied as anode materials for lithium-ion batteries, which exhibit improved cyclic performance compared to pure Co 2SnO4 nanocrystals. The carbon matrix has good volume buffering effect and high electronic conductivity, which may be responsible for the improved cyclic performance. © 2011 Elsevier B.V. All rights reserved.
SnO2/WO3core–shell Nanorods and Their High Reversible Capacity As Lithium-Ion Battery Anodes

Xin-Yu Xue,Bin He,Shuang Yuan,Li-Li Xing,Zhao-Hui Chen,Chun-Hua Ma

DOI: https://doi.org/10.1088/0957-4484/22/39/395702

IF: 3.5

2011-01-01

Nanotechnology

Abstract:WO(3) nanorods are uniformly coated with SnO(2) nanoparticles via a facile wet-chemical route. The reversible capacity of SnO(2)/WO(3) core-shell nanorods is 845.9 mA h g(-1), higher than that of bare WO(3) nanorods, SnO(2) nanostructures, and traditional theoretical results. Such behavior can be attributed to a novel mechanism by which nanostructured metallic tungsten makes extra Li(2)O (from SnO(2)) reversibly convert to Li(+). This mechanism is confirmed by x-ray diffraction results. Our results open a way for enhancing the reversible capacity of alloy-type metal oxide anode materials.
Layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods with high reversible capacity in lithium-ion batteries.

Ning Du,Yifan Chen,Chuanxin Zhai,Hui Zhang,Deren Yang

DOI: https://doi.org/10.1039/c3nr00275f

IF: 6.7

2013-01-01

Nanoscale

Abstract:We demonstrated the layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods. FeOOH nanorods were first synthesized via a hydrothermal process, and acted as a template for subsequent layer-by-layer deposition. It was indicated that the electrostatic attraction between the charged species may play the key role in the formation of the core-shell nanostructures. When used as an anode material in lithium-ion batteries, γ-Fe2O3@SnO2@C porous core-shell nanorods showed high initial Coulombic efficiency, high reversible capacity, and good cycling and rate performances. The correlation between the structure, composition and electrochemical performance was also discussed.
Self-templating synthesis of SnO2-carbon hybrid hollow spheres for superior reversible lithium ion storage.

Ping Wu,Ning Du,Hui Zhang,Chuanxin Zhai,Deren Yang

DOI: https://doi.org/10.1021/am200168w

IF: 9.5

2011-01-01

ACS Applied Materials & Interfaces

Abstract:This paper reports a novel self-templating methodology for the formation of SnO(2)-carbon hybrid hollow spheres by using Sn spheres as sacrificing templates. The time-sequenced structural evolution of the templates indicates that the nanoscale Kirkendall effect plays a critical role in the transformation from Sn spheres to the hybrid hollow spheres. Moreover, the as-synthesized SnO(2)-carbon hybrid hollow spheres have been applied as anode materials for lithium-ion batteries, which exhibit a much higher initial Coulombic efficiency and better cycling performance than pure SnO(2) hollow spheres.
Solvothermal synthesis of carbon-coated tin nanorods for superior reversible lithium ion storage

Ping Wu,Ning Du,Jie Liu,Hui Zhang,Jingxue Yu,Deren Yang

DOI: https://doi.org/10.1016/j.materresbull.2011.08.060

IF: 5.6

2011-01-01

Materials Research Bulletin

Abstract:This paper reports the large-scale synthesis of carbon-coated tin (Sn–C) nanorods through a facile solvothermal carbonization approach by using Sn nanorods as templates and ethanol as a solvent. The as-synthesized Sn–C nanorods have been applied as anode materials for lithium-ion batteries. The Sn–C anode, which exhibits relatively higher initial Coulombic efficiency and lithium storage capacities, is more attractive than the previously reported tin oxide or sulfide anodes. The superior performance of the Sn–C nanorods makes it a promising anode material in high-energy density batteries.
SnO 2 @C core-shell spheres: synthesis, characterization, and performance in reversible Li-ion storage

Hui Qiao,Zhi Zheng,Lizhi Zhang,Lifen Xiao

DOI: https://doi.org/10.1007/s10853-008-2510-8

IF: 4.5

2008-01-01

Journal of Materials Science

Abstract:The nanostructured SnO 2 @C spheres with tin oxide cores and carbon shells were prepared by a facile one-pot solvothermal method followed by a subsequent calcination at 600 °C in a high-purity nitrogen atmosphere. The resulting samples were characterized with thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and charge-discharge test. Electrochemical performance test showed that these SnO 2 @C core-shell spheres exhibited an initial discharge specific capacity of 667.4 mAh/g in the potential range of 1.2–0.01 V. After 18 cycles, the capacity of the SnO 2 @C core-shell spheres anode stabilized reversibly at about 370 mAh/g. This improved cycling performance could be attributed to the carbon shells, which can enhance the conductivity of SnO 2 and suppress the aggregation of active particles to increase their structure stability during cycling. These SnO 2 @C core-shell spheres are promising anodes for lithium ion batteries. This study provides a facile way to improve the cycle ability of transition oxides for reversible lithium-ion storage.
Assembly of FeWO 4 -SnO 2 core-shell nanorods and their high reversible capacity as lithium-ion battery anodes

lili xing,ping deng,bin he,yuxin nie,xiaoling wu,shuang yuan,chunxiao cui,xinyu xue

DOI: https://doi.org/10.1016/j.electacta.2013.11.178

IF: 6.6

2014-01-01

Electrochimica Acta

Abstract:FeWO4-SnO2 core-shell nanorods are assembled via a two-step method. SnO2 nanoparticles are uniformly coated on the surface of FeWO4 nanorods. And high lithium storage performance has been achieved from them. At C/10 rate (10hours per charging cycle), the reversible capacity (the 2nd cycle) of FeWO4-SnO2 core-shell nanorods is up to 1286.9 mAh g−1, much higher than that of FeWO4 nanorods, SnO2 and traditional theoretical results. Such behaviour is attributed to the synergistic effect between nanostructured SnO2 and FeWO4. Our results imply that core-shell nanocomposites are good candidates for high-capacity anodes of lithium ion battery.
SnO2/α-MoO3 Core-Shell Nanobelts and Their Extraordinarily High Reversible Capacity As Lithium-Ion Battery Anodes

Xin-Yu Xue,Zhao-Hui Chen,Li-Li Xing,Shuang Yuan,Yu-Jin Chen

DOI: https://doi.org/10.1039/c1cc00076d

IF: 4.9

2011-01-01

Chemical Communications

Abstract:Extraordinarily high reversible capacity of lithium-ion battery anodes is realized from SnO(2)/α-MoO(3) core-shell nanobelts. The reversible capacity is much higher than traditional theoretical results. Such behavior is attributed to α-MoO(3) that makes extra Li(2)O reversibly convert to Li(+).
Hybrid coating SnO2 for enhanced Li ions storage

Yanan Gao,Jie Liu,Chenjie Lou,Hailiang Geng,Jipeng Fu,Chengyu Li,Yongjin Chen,Cong Wang,Wenda Zhang,Xiaojun Kuang,Yifan Liu,Xiang Gao,Mingxue Tang

DOI: https://doi.org/10.1016/j.cclet.2023.108268

IF: 9.1

2023-03-01

Chinese Chemical Letters

Abstract:Anode SnO2 in lithium-ion batteries suffers from volume expansion and agglomeration. Here, the SnO2 nanoparticles are hybrided with ZrO2 particles by the support of carbon nanotube networks. The obtained SnO2/C/ZrO2 composite shows improved electrochemical performances. Investigations reveal that the carbon nanotubes shorten the transmission path of electrons and Li+ ions. Ball milling with ZrO2 promotes the formation of nanosized SnO2 to weaken the internal strain change, being beneficial to buffering volume change during electrochemical cycling afterwards. High-resolution 6,7Li NMR investigations indicate that conversion and alloying reactions are stepwise involved for SnO2/C/ZrO2 anode. The strategy of designing SnO2/C/ZrO2 composite from the morphology-controlled metal-organic frameworks for energy storage widens the possibility to fabricate promising materials with enhanced performances.

chemistry, multidisciplinary
Core–shell SnO 2 @TiO 2 –B nanowires as the anode of lithium ion battery with high capacity and rate capability

dean zhang,qi wang,jing sun,lili xing,xinyu xue

DOI: https://doi.org/10.1016/j.matlet.2014.04.160

IF: 3

2014-01-01

Materials Letters

Abstract:Core–shell SnO2@TiO2–B nanowires are synthesized via a two-step hydrothermal route. SnO2 nanoparticles are uniformly coated on the whole surface of TiO2–B nanowires. As the anode of lithium ion batteries, core–shell SnO2@TiO2–B nanowires exhibit high lithium storage capacity and superior rate capability. The reversible capacity is ~1160mAhg−1 at C/5 rate (5h per charging cycle) and the retention is 790mAhg−1 after 30 cycles. At the rate of 2C, the capacity can be maintained at 556mAhg−1. Such a good lithium storage performance can be attributed to the synergistic effect between SnO2 and TiO2–B nanostructures.
Encapsulation of TiO2(B) nanowire cores into SnO 2/carbon nanoparticle shells and their high performance in lithium storage

Zunxian Yang,GuoDong Du,Zaiping Guo,Xuebin Yu,Zhixin Chen,Tailiang Guo,Rong Zeng

DOI: https://doi.org/10.1039/c1nr10837a

IF: 6.7

2011-01-01

Nanoscale

Abstract:TiO2(B)@SnO2/carbon hybrid nanowires have been synthesized by two simple hydrothermal processes and subsequent heat treatment in argon. The composite has a unique architecture, as its morphology consists of particles having a TiO2(B) nanowire core and a porous SnO2/carbon nanoparticle shell layer. The unique core/shell structure and chemical composition will be useful for many potential applications, including the lithium ion battery. The electrochemical results on the composite are presented to demonstrate the superior cycling performance and rate capability of the TiO2(B)@SnO2/carbon nanowires. This composite exhibits a high reversible capacity of similar to 669mAhg(-1), and excellent cycling stability, indicating that the composite is a promising anode material for Li-ion batteries.
Elaborate synthesis of black tin oxide-black titanium oxide core-shell nanotubes for ultrastable and fast lithium storage.

Zheng-Wei Zhou,Long Pan,Yi-Tao Liu,Xiao-Dong Zhu,Xu-Ming Xie

DOI: https://doi.org/10.1039/c8cc02040j

IF: 4.9

2018-01-01

Chemical Communications

Abstract:Herein, we report on the elaborate synthesis of a novel hybrid architecture, i.e., black tin oxide-black titanium oxide core-shell nanotubes (denoted as TiO2-x@SnO2-x nanotubes) by NaBH4 co-reduction. The synergistic interplay between the SnO2-x core and the TiO2-x shell results in superior cyclability and rate capability for ultrastable and fast lithium storage.
Dispersion of SnO2 Nanocrystals on TiO2(B) Nanowires As Anode Material for Lithium Ion Battery Applications

Zunxian Yang,Guodong Du,Qing Meng,Zaiping Guo,Xuebin Yu,Zhixin Chen,Tailiang Guo,Rong Zeng

DOI: https://doi.org/10.1039/c1ra00500f

IF: 4.036

2011-01-01

RSC Advances

Abstract:TiO2(B)@ SnO2 core-shell hybrid nanowires have been synthesized by a facile hydrothermal process and subsequent liquid phase reaction. Hybrid nanowire electrodes exhibit excellent reversible lithium storage capacity rate capability and good cyclability, mainly due to the particular architecture of the composite, which features an open continuous channel along its axis, facilitating lithium ion diffusion, and provides effective mechanical support for the TiO2( B) core, alleviating the stress produced during discharge-charge cycling and also preventing the pulverization of the Sn nanoparticles. Owing to its superior electrochemical performance, this composite could be a promising potential anode material for lithium ion batteries.
Hydrothermal Synthesis of SnO2 Embedded MoO3-x Nanocomposites and Their Synergistic Effects on Lithium Storage

Daxian Cao,Hongkang Wang,Beibei Li,Chao Li,Sanmu Xie,Andrey L. Rogach,Chunming Niu

DOI: https://doi.org/10.1016/j.electacta.2016.09.012

IF: 6.6

2016-01-01

Electrochimica Acta

Abstract:We demonstrate a facile hydrothermal synthesis of SnO2/MoO3-x nanocomposites with ultrafine SnO2 crystallites uniformly embedded into an amorphous MoO3-x matrix, which demonstrate superior electrochemical performance as anodes for lithium ion batteries, including long-term cycling stability (953mAh/g after 100 cycles at 200mA/g), high rate capability (668.0mAh/g after 1000 cycles at 1000mA/g) and high initial Coulombic efficiency (81.3% at 200mA/g). Synergistic effects of the both components SnO2 and MoO3-x on the lithium storage are revealed by electrochemical characterization and supported by TEM and XPS analysis performed at the different discharge/charge states of the respective electrodes. SnO2 nanocrystallites confined within the amorphous MoO3-x matrix efficiently buffer the volume changes of Li-Sn alloying-dealloying upon cycling, while the metallic Mo in situ generated by a conversion reaction of MoO3-x promotes the reversible reaction SnO2+Li+↔Sn+Li2O. In addition, the amorphous MoO3-x with bulk or surface defects allows for a better lithium insertion and thus enhanced capacity.
ChemInform Abstract: Porous ZnCo2O4 Nanowires Synthesis via Sacrificial Templates: High-Performance Anode Materials of Li-Ion Batteries.

Ning Du,Yanfang Xu,Hui Zhang,Jingxue Yu,Chuanxin Zhai,Deren Yang

DOI: https://doi.org/10.1002/chin.201125016

2011-01-01

ChemInform

Abstract:ZnCo 2 (C 2 O 4 ) 3 nanowires are prepared by a microemulsion‐based method by stirring a mixture of cetyltrimethylammonium bromide dissolved in cyclohexane and n‐pentanol, and an aqueous solution of H 2 C 2 O 4 , Zn(NO 3 ) 2 , and Co(NO 3 ) 2 for 2 h at room temperature.
Facile Synthesis of SnO2 Nanocrystals Coated Conducting Polymer Nanowires for Enhanced Lithium Storage

Zhijia Du,Shichao Zhang,Tao Jiang,Xiaomeng Wu,Lan Zhang,Hua Fang

DOI: https://doi.org/10.1016/j.jpowsour.2012.07.052

IF: 9.2

2012-01-01

Journal of Power Sources

Abstract:SnO2 nanoparticles uniformly decorated polypyrrole (PPy) nanowires are synthesized by a facile two-step electrochemical reaction method: electropolymerization and electrodeposition. The nanostructured SnO2 PPy hybrids show porous reticular morphology and homogenous distributions. The reticular SnO2 PPy nanowires can increase the electrode/electrolyte interface and accommodate the volume variation of SnO2. When applied as anode materials for lithium ion batteries, the unique nanostructured hybrids deliver meaningfully improved Li+ storage performance with the first reversible capacity of 690 mAh g(-1). This facile synthesis procedure can also be simply grafted to other inorganic -organic hybrid composites. (C) 2012 Elsevier B.V. All rights reserved.

ChemInform Abstract: Synergistic Effect of SnO2/ZnWO4 Core—Shell Nanorods with High Reversible Lithium Storage Capacity.

Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

SnO2/NiO core-shell nanobelts and their high reversible lithium storage capacity arising from synergisticeffect

Zn2geo4@C Core-Shell Nanorods As Highly Reversible Anode Materials for Lithium-Ion Batteries

Synthesis of Co2SnO4@C core-shell nanostructures with reversible lithium storage

SnO2/WO3core–shell Nanorods and Their High Reversible Capacity As Lithium-Ion Battery Anodes

Layer-by-layer synthesis of γ-Fe2O3@SnO2@C porous core-shell nanorods with high reversible capacity in lithium-ion batteries.

Self-templating synthesis of SnO2-carbon hybrid hollow spheres for superior reversible lithium ion storage.

Solvothermal synthesis of carbon-coated tin nanorods for superior reversible lithium ion storage

SnO 2 @C core-shell spheres: synthesis, characterization, and performance in reversible Li-ion storage

Assembly of FeWO 4 -SnO 2 core-shell nanorods and their high reversible capacity as lithium-ion battery anodes

SnO2/α-MoO3 Core-Shell Nanobelts and Their Extraordinarily High Reversible Capacity As Lithium-Ion Battery Anodes

Hybrid coating SnO2 for enhanced Li ions storage

Core–shell SnO 2 @TiO 2 –B nanowires as the anode of lithium ion battery with high capacity and rate capability

Encapsulation of TiO2(B) nanowire cores into SnO 2/carbon nanoparticle shells and their high performance in lithium storage

Elaborate synthesis of black tin oxide-black titanium oxide core-shell nanotubes for ultrastable and fast lithium storage.

Dispersion of SnO2 Nanocrystals on TiO2(B) Nanowires As Anode Material for Lithium Ion Battery Applications

Hydrothermal Synthesis of SnO2 Embedded MoO3-x Nanocomposites and Their Synergistic Effects on Lithium Storage

ChemInform Abstract: Porous ZnCo2O4 Nanowires Synthesis via Sacrificial Templates: High-Performance Anode Materials of Li-Ion Batteries.

Facile Synthesis of SnO2 Nanocrystals Coated Conducting Polymer Nanowires for Enhanced Lithium Storage