Abstract:The (BiMgFeO4/activated carbon) composite has been developed deploying glycine as fuel in a self-combustion process. It was employed to remove methyl green (MG), a cationic dye, and methyl orange (MO), an anionic dye, from aqueous solutions. It was characterized by specific surface area measurement (BET), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). FTIR spectra showed three bands located around 548.18 cm-1, 973. cm-1, and 1577.01 cm-1 attributed to the stretching vibrations of Bi-O, Fe-O, Mg-O, and O-H, respectively. The SEM images revealed a highly porous and irregular structure beneficial for the effective diffusion of dye molecules. The sample contains a notable proportion of holes with different sizes of pores. The microcavities observed on the adsorbent surface were conducive to good diffusion of the dye molecules. The composite's mesoporous structure was deduced by BET analysis, which allowed us to determine the material's specific surface area of 20.289 m2/g and its pore diameter of 7.54 nm. X-ray diffraction showed peaks attributed to Fe3O4, MgO, and Bi2O3 (confirming the presence of BiMgFeO4 ferrite) and other peaks attributed to dehydrated hemicellulose and carbon/graphite (confirming the use of activated carbon). The various experimental parameters affecting the performance of this reaction, such as temperature, contact time, initial dye concentration, and adsorbent mass, were studied. The composite's pH zero charge point (pHPZC) was found to be 8.77. The equilibrium isotherms were described using the Freundlich and Langmuir adsorption models. The equilibrium time was a function of the starting dye concentration in the adsorption tests. Adsorption equilibrium for (BiMgFeO4/activated carbon) was formed after 120 min, according to adsorption kinetic analysis. Moreover, the results revealed that pseudo-second-order kinetics could correctly characterize the adsorption of MO and MG on the composite. Adsorption isotherms confirmed that the adsorption process of both dyes onto the (BiMgFeO4/activated carbon) composite was successful. The Langmuir model appears to be best suited to the adsorption of MO and MG on the(BiMgFeO4/activated carbon), with a maximum adsorption capacity of 196.078 mg.g-1 and 192.307 mg.g-1 respectively, at 298 K. The adsorption of the two dyes was spontaneous and exothermic, in line with the thermodynamic parameters associated with the sorbent/adsorbate system. The determination of the isosteric heat of adsorption revealed that physisorption takes place with weak intermolecular interactions between the two dyes and the composite surface.

Al‐doped Mixed Transition Metal Ferrites Synthesis and Application in Adsorption of Dyes

Sol-gel-cum-hydrothermal synthesis of mesoporous Co-Fe@Al2O3−MCM-41 for methylene blue remediation

Synthesis and Characterization of Nano-CoFe2O4 Ferrite: Application to the Adsorption of AG25 Dye in Aqueous Solution

Preparation and characterization of a novel nanocomposite based on MnCr-layered double oxide and CoFe2O4 spinel ferrite for methyl orange adsorption

Novel Magnetic Fe3O4@C Nanoparticles As Adsorbents for Removal of Organic Dyes from Aqueous Solution.

Efficient Adsorptive Removal of Cationic Dyes from Aqueous Solution by Magnetic Silica Core-Shell Nanoparticles

Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes

Corn Husk‐Derived Carbon Fused with Iron Oxide as Adsorbent for Cationic Dyes

Synthesis of Fe2SiO4-Fe7Co3 Nanocomposite Dispersed in the Mesoporous SBA-15: Application as Magnetically Separable Adsorbent

Nanozinc ferrites @ silica as efficient adsorbent for dye removal from wastewater: synthesis and adsorption studies

A novel Fe3O4/MgAl-LDH hollow microspheres for effective removal of dyes from wastewater

Ternary Metal Oxide Embedded Carbon Derived from Metal Organic Frameworks for Adsorption of Methylene Blue and Acid Red 73.

Synthesis of magnetically tuneable molybdic acid-functionalized Fe3O4 nanoparticles for efficient dye removal in aqueous media

Removal of Cationic and Anionic Dyes from Textile Waste Effluent using a Magnetic Nanocomposite made of Activated Carbon and Magnesium-Doped Bismuth Ferrite

Preparation of Novel Magnetic Sodium Alginate-Ferric(III) Gel Beads and Their Super-Efficient Removal of Direct Dyes from Water

Novel synthesis and characterization of magnesium-doped CoFe 2 O 4 nanoparticles –SiO 2 –3-aminopropylethoxysilane– gallic acid magnetic nanocomposite for effective removal of cationic dyes

Advanced photocatalytic degradation of textile dyes and removal of heavy metal ions from MFe2O4 using photo-Fenton mechanism

Synthesis of MgAl-LDH/CoFe2O4 and MgAl-CLDH/CoFe2O4 nanofibres for the removal of Congo Red from aqueous solution

Magnetically Recyclable Adsorption of Anionic Pollutants from Wastewater using 3,5-Diaminobenzoic Acid-Functionalized Magnetic Iron-Oxide-Nanoparticles

Synthesis and Characterization Bimetallic Organic Framework CoxFex(BDC) and Adsorption Cationic and Anionic Dyes

Design of silver-zinc-nickel spinel-ferrite mesoporous silica as a powerful and simply separable adsorbent for some textile dye removal