Versatile and Direct Transformation of Secondary Amides into Ketones by Deaminative Alkylation with Organocerium Reagents
Kai-Jiong Xiao,Ai-E Wang,Hong Huang,Pei-Qiang Huang
DOI: https://doi.org/10.1002/ajoc.201200066
IF: 3.116
2012-01-01
Asian Journal of Organic Chemistry
Abstract:Cerium makes it simple: A simple, efficient, and versatile CC bond-forming method for the direct transformation of secondary amides into ketones by Tf2O-mediated deaminative alkylation with organocerium reagents is described. A wide variety of ketones, including α,β-unsaturated ketones, β-chloroenones, diaryl ketones, and ynones, were synthesized by using this method. Amides are a class of easily available and highly stable compounds. Secondary amides1 also serve as powerful directing groups in CH activation.2 Ketones are also a class of extremely versatile molecules that enable a number of fundamental transformations in organic synthesis.3 Hence the transformation of amides into ketones4 is of high relevance in organic synthesis. However, because of the high stability of amides, their direct transformation into more reactive ketones presents a formidable challenge. Although a limited number of specially designed amides, such as Weinreb amides (N-methoxy-N-methylamides), have been prepared as intermediates for the conversion of carboxylic acids/esters into ketones,4 such methods cannot be used for the transformation of simple amides into ketones. Herein, we report a general one-pot method for the direct conversion of secondary amides into ketones5 by using organocerium species as the alkylating reagents. On the basis of carbonyl activation with trifluoromethanesulfonic anhydride (Tf2O),6 we have recently reported the direct conversion of tertiary lactams/amides into tertiary alkyl amines by sequential reductive alkylation with Grignard and organolithium reagents.7 As a continuation of this study, and in connection with our general interest in the development of step-economical synthesis,7a, 8, 9 we investigated the Tf2O-activated reductive alkylation of secondary amides. We discovered that cerium complexes generated in situ from RMgX and CeCl3, and organocerium reagents (RCeCl2) generated in situ from RLi and CeCl310 were effective for the direct conversion of secondary amides into ketones by activation with Tf2O and 2-fluoropyridine (Scheme 1). Direct transformation of secondary amides into ketones. Tf2O=trifluoromethanesulfonic anhydride; 2-F-Py=2-fluoropyridine. The conversion of N-butylbenzamide (1 a) into ketone 2 a was selected as a model reaction. An investigation of the influence of the base revealed that the use of a base was necessary, and 2-fluoropyridine11 gave the best results. The influence of the organometallic reagent was then explored in combination with 2-fluoropyridine (1.2 equiv) as the base. Organocerium reagents (RCeCl2)12 generated in situ from RLi and CeCl3 and cerium complexes generated in situ from RMgX and CeCl313 are more efficient than organomagnesium, organolithium, and organozinc species for this reaction. Optimal yields were achieved by using the cerium complex nBuMgBr/CeCl3 (3.0 equiv). The optimal protocol for one-pot transformation of secondary amides into ketones was identified as successive treatment of a solution of the amide in dichloromethane and 2-fluoropyridine (1.2 equiv) with Tf2O (1.1 equiv, −78 °C, then 0 °C), and RM/CeCl3 (3.0 equiv, −78 °C), then hydrolysis with aqueous HCl. Under the optimized conditions, the scope of the transformation was studied. As shown in Table 1, this method of converting secondary amides into ketones by deaminative alkylation with organocerium reagents has a wide scope and broad functional group tolerance. Entry Substrate RM Product (Yield [%])[b] Entry Substrate RM Product (Yield [%])[b] 1 nBuMgBr 14 EtMgBr 2 1 a nBuLi 2 a (87) 15 nBuMgBr 3 1 a iPrMgBr 16 nBuMgBr 4 1 a 17 nBuMgBr 5 1 a 18 1 j 6 1 a PhMgBr 19 nBuMgBr 2 n (89) 7 1 a 20 BnMgBr 8 1 a 21 BnMgBr 2 p (84) 9 nBuMgBr 2 a (83) 22 nBuLi 10 nBuLi 2 a (87) 23 1 n BnMgBr 11 nBuLi 24 nBuMgBr 12 nBuLi 25 BnMgBr 13 nBuMgBr 26 nBuMgBr A wide array of aroyl (Table 1, entries 1–16), alkanoyl (Table 1, entries 17–25), and alkenoyl amides (Table 1, entry 26) were converted into the corresponding ketones in high yields. The substituents on the N atom of the secondary amides, regardless of whether they are N-n-alkyl (Table 1, entries 1–9, 15-18, 24–26), N-s-alkyl (Table 1, entries 10–14, 21–23) or N-aryl (Table 1, entry 19), do not have much influence on the reactivity. The reaction also went smoothly with hindered amides, such as 1 o (Table 1, entry 24). The reaction is compatible with many functional groups on the amides, including ethers (Table 1, entry 12), aromatic bromides (Table 1, entry 13), tertiary aromatic amines (Table 1, entry 14), thiophene (Table 1, entry 16), terminal CC bonds (Table 1, entry 25), and even conjugated CC bonds (Table 1, entry 26). For α,β-unsaturated amide 1 q, only the 1,2-addition product 2 u was obtained, which provides an alternative approach to enones14 (Table 1, entry 26). With regard to the organocerium complexes, alkyl (Table 1, entries 1–4, 9–17, 19, 22, 24, 26), benzyl (Table 1, entries 20, 21, 23, 25), aryl (Table 1, entries 6 and 7), and alkenyl cerium complexes (Table 1, entry 18) generated from either organolithium or Grignard reagents can be used for the one-pot synthesis of ketones. The reaction of amide 1 a with the allyl cerium complex generated from allylmagnesium bromide proceeded with migration of the CC bond to produce the conjugated enone 2 d in 78 % yield (Table 1, entry 5). The use of alkenyl cerium complexes can also lead to enones, such as 2 p (Table 1, entry 18). The reaction of amide 1 a with aryl cerium complexes gave diaryl ketones15 (Table 1, entries 6 and 7). It should be noted that functionalized aryl magnesium reagents that were reported by Knochel et al.16 can also be applied in this procedure (Table 1, entry 7). It is interesting that use of alkynyl cerium reagents generated from lithium acetylides yielded β-chloroenones, such as 2 g (Table 1, entry 8), which are versatile building blocks for the synthesis of heterocycles.17 It seems that the addition of a chlorine ion occurred in situ after ynone formation. In conclusion, we have developed a simple, efficient, and general method for the direct transformation of secondary amides into ketones. Considering the central role played by ketones, this versatile and mild method opens up an avenue in organic synthesis. Further development of this method for the synthesis of secondary amines and ketimines will be reported elsewhere.18 Trifluoromethanesulfonic anhydride (185 μL, 1.1 mmol, 1.1 equiv) was added dropwise to a cooled (−78 °C) solution of amide 1 (1.0 mmol, 1.0 equiv) and 2-fluoropyridine (103 μL, 1.2 mmol, 1.2 equiv) in dichloromethane (4 mL). The reaction was warmed to 0 °C in an ice bath and stirred for 10 min. The mixture was then cannulated into a freshly prepared solution of the organocerium complex (3.0 mmol, 3.0 equiv) in THF (15 mL) at −78 °C and stirred for 1 h. Aqueous HCl (2 M, 5 mL) was added, then the mixture was warmed to RT and stirred for 2 h. The organic layer was separated and the aqueous phase was extracted with diethyl ether (3×10 mL). The combined organic layers were washed with brine, dried over anhydrous Na2SO4, filtered, and concentrated under reduced pressure. The residue was purified by chromatography on a silica gel column to afford the desired ketone 2. We are grateful for financial support from the National Basic Research Program (973 Program) of China (Grant No. 2010CB833200), the NSF of China (21072160 and 20832005), the Fundamental Research Funds for the Central Universities of China (Grant No. 201112G001), and a Scholarship Award for Excellent Doctoral Student granted by Ministry of Education of China (2010). We are grateful to Prof. Dr. G. M. Blackburn for valuable discussions. Detailed facts of importance to specialist readers are published as "Supporting Information". Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.