Retraction:Effect of Carbon Nanotube Addition on the Compressive Fracture Characteristics of Zr-based Bulk Metallic Glass Composites

Zan Bian,Tao Zhang,Akihisa Inoue

DOI: https://doi.org/10.2320/matertrans.45.284

2004-01-01

MATERIALS TRANSACTIONS

Abstract:This article was retracted. See the Notification.

What problem does this paper attempt to address?

WITHDRAWN: Nanocrystallization kinetics, structure and magnetic properties of FINEMET-type ribbons with Cu substitution by Ag

Manh-Huong Phan,H-X Peng,Seong-Cho Yu,Nguyen Duc Tho,Nguyen Chau

DOI: https://doi.org/10.1016/j.physb.2006.04.003

2006-01-01

Abstract:This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy .
Retraction Note: Enhanced tensile strength and thermal conductivity in copper diamond composites with B4C coating

Youhong Sun,Linkai He,Chi Zhang,Qingnan Meng,Baochang Liu,Ke Gao,Mao Wen,Weitao Zheng

DOI: https://doi.org/10.1038/s41598-022-25431-8

IF: 4.6

2022-12-07

Scientific Reports

Abstract:Editor's Note: this Article has been retracted; the Retraction Note is available at https://www.nature.com/articles/10.1038/s41598-022-25431-8

multidisciplinary sciences
RETRACTED: Nanofibrous Composite Samples Based on a Cu(I) Complex and Its Polymer Host: Synthesis, Characterization and Emissive Performance Improvement

Liang Liu,Jianfeng Ma

DOI: https://doi.org/10.1016/j.synthmet.2016.07.028

IF: 4

2016-01-01

Synthetic Metals

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of < This article has been retracted: please see Elsevier Policy on Article Withdrawal http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. After a thorough investigation, the Editor has concluded that the acceptance of this article was based upon the positive advice of at least one illegitimate reviewer report. The report was submitted from an email account which was provided to the journal as a suggested reviewer during the submission of the article. Although purportedly a real reviewer account, the Editor has concluded that this was not of an appropriate, independent reviewer. This manipulation of the peer-review process represents a clear violation of the fundamentals of peer review, our publishing policies, and publishing ethics standards. Apologies are offered to the reviewer whose identity was assumed and to the readers of the journal that this deception was not detected during the submission process. Further, the journal records indicate that a non-genuine email address was provided for the corresponding author and the individual listed as the corresponding author did not receive any correspondence from the journal throughout the submission process. >
Retracted: Evaluation of MWCNT Particles-Reinforced Magnesium Composite for Mechanical and Catalytic Applications

Bioinorganic Chemistry and Applications

DOI: https://doi.org/10.1155/2024/9782693

2024-01-27

Bioinorganic Chemistry and Applications

Abstract:This article has been retracted by Hindawi following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of one or more of the following indicators of systematic manipulation of the publication process: (1) Discrepancies in scope (2) Discrepancies in the description of the research reported (3) Discrepancies between the availability of data and the research described (4) Inappropriate citations (5) Incoherent, meaningless and/or irrelevant content included in the article (6) Manipulated or compromised peer review

chemistry, inorganic & nuclear,biochemistry & molecular biology, organic
RETRACTED: Structural, mechanical and corrosion resistance properties of Al2O3–CeO2 nanocomposites in silica matrix on Mg alloys by a sol–gel dip coating technique

A.R. Phani,F.J. Gammel,T. Hack

DOI: https://doi.org/10.1016/j.surfcoat.2006.07.002

IF: 4.865

2006-12-01

Surface and Coatings Technology

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy).This article has been retracted at the request of the Editor-in-Chief and Author. Large sections of text and a number of images from this paper have been published before by the same authors in Materials and Corrosion, 56 (2005), 77-82 (http://dx.doi.org/10.1002/maco.200403823), describing a different system. This article does not contain reference to the Materials and Corrosion article.One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a violation of copyright laws and of generally accepted publishing ethics.Apologies are offered to readers of the journal that this was not detected during the submission process.

physics, applied,materials science, coatings & films
Retraction Note: Effect of Electropulsing Treatment on the Microstructure, Texture, and Mechanical Properties of Cold-Rolled Ti-6Al-4V Alloy

Ye X.,Tang G.,Song G.,Kuang J.

DOI: https://doi.org/10.1557/jmr.2014.171

2014-01-01

Abstract:doi: 10.1557/jmr.2014.171, Published by Cambridge University Press, 24 July 2014. This article1 has been retracted by the corresponding author, G. Tang. In Figs. 5(6) and 5(h), lead author X. Ye duplicated the microstructure figures to interpret the samples with different processing parameters.
Retracted: A Performance of a Nanofiber Polymer in Geotechnical Engineering Support

Advances in Materials Science and Engineering

DOI: https://doi.org/10.1155/2023/9858302

IF: 2.0981

2023-12-30

Advances in Materials Science and Engineering

Abstract:This article has been retracted by Hindawi, as publisher, following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of systematic manipulation of the publication and peer-review process. We cannot, therefore, vouch for the reliability or integrity of this article.

materials science, multidisciplinary
Retraction notice to "Fabrication and characterizations of a Gadolinium doped terbium gallium garnet crystal for Faraday rotators" 112225]

Zhe Chen,Xiangyong Wang,Jun Wang,Chao Yang

DOI: https://doi.org/10.1016/j.optmat.2023.113551

IF: 3.754

2023-03-08

Optical Materials

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal ( http://www.elsevier.com/locate/withdrawalpolicy ). This article has been retracted at the request of the Authors. The paper is retracted upon the authors' request because it was concurrently published in two different journals due to the authors' misinterpretation of the journal's publishing policy. For this, the authors apologize to the scientific community and to the readers of the journal.

materials science, multidisciplinary,optics
RETRACTED: P-type Zno Thin Films Fabricated by Al–N Co-Doping Method at Different Substrate Temperature

Guodong Yuan,Zhizhen Ye,Qing Qian,Liping Zhu,Jingyun Huang,Binghui Zhao

DOI: https://doi.org/10.1016/j.jcrysgro.2004.09.042

IF: 1.8

2004-01-01

Journal of Crystal Growth

Abstract:This article has been retracted at the request of the Editor-in-Chief of the Journal of Crystal Growth. This article has been retracted; please see Elsevier Policy on Article Withdrawal: http://www.elsevier.com/locate/withdrawalpolicy .
RETRACTED: Mechanical properties and phase transition of biomedical titanium alloy strips with initial quasi-single phase state under high-energy electropulses

Xiaoxin Ye,Zion T H Tse,Guoyi Tang,Guolin Song

DOI: https://doi.org/10.1016/j.jmbbm.2014.11.009

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have reused figures and text that have already appeared in their previous articles. Figure 4 duplicates figure 4 in Reference [1], figure 6 in Reference [2], figure 8 in Reference [3] and figure 4 in Reference [4], while Figure 7a-b duplicates figure 7a-b in Reference [4]. The article also duplicates significant parts of the text that appeared in References [1] and [4]. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. Journal records indicate that confirmation of the submission and publication of the article was sent to the first author’s email address but not to the corresponding author's email address. The corresponding author and the first author wish to mention that the co-author Zion T.H. Tse was not involved in the preparation and handling of this article. He was not informed about the publication nor granted the use of his name and affiliation in the publication. References [1] J Mater Res 30 (2015) 206-223, http://dx.doi.org/10.1557/jmr.2014.367. [2] Mat Sci Eng A 622 (2015) 1-6, http://dx.doi.org/10.1016/j.msea.2014.11.003. [3] J Mater Res 29 (2014) 1500-1512, http://dx.doi.org/10.1557/jmr.2014.171. [4] Adv Eng Mater 17 (2015) 995-1007, http://dx.doi.org/10.1002/adem.201400273.
RETRACTED: Preparation and Dielectric Properties of BaTiO3/epoxy Nanocomposites for Embedded Capacitor Application

Zhong-Feng Zhang,Xiao-Fei Bai,Jun-Wei Zha,Wei-Kang Li,Zhi-Min Dang

DOI: https://doi.org/10.1016/j.compscitech.2014.04.012

IF: 9.1

2014-01-01

Composites Science and Technology

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Authors due to disagreement about the relative contributions of the co-authors.
Modulating the microstructure and mechanical properties of β-Ti-reinforced bulk metallic glass composites by carbon addition

Linlin Sun,Jingshan Cao,Liyuan Li,Junyan Li,Jinshan Li,Jun Wang

DOI: https://doi.org/10.1016/j.vacuum.2023.112211

IF: 4

2023-05-29

Vacuum

Abstract:The effects of carbon addition on the microstructure modifications and mechanical response of Ti 48 Zr 20 Nb 12 Cu 5 Be 15 BMGCs are investigated. With increasing carbon content from 0.1 at.% to 0.3 at.%, the evolution of morphology and solid solution strength is not obvious, and the ductile-brittle transition is presented due to the large changes of the sub-Tg relaxation enthalpies, ΔHrel , in the glass matrix when the interstitial C content increasing to 0.5 at. %. Once the C content excess this threshold value, a large melting area and open cracks are mainly related with the size and number of carbide particles and the magnitudes of free volume in the glass matrix, which indicates the appearance of large-sized with vermicular-like structure is the cause of instability of composite material. In addition, when C exceeds its limit solute concentration, harder β-Ti-reinforced dendrites and precipitate phases can suppress the initiation of shear bands, and the transfer ability of the concentrated stress to the surrounding glass becomes weaker, which promotes the formation of cracks, resulting in brittle failure.

materials science, multidisciplinary,physics, applied
Retraction: Zhu et al. The Effect of Vacuum Annealing Temperature on the Properties of AlCrTiSiN Coating Prepared by Arc Ion Plating. Coatings 2022, 12, 316

Qiang Zhu,Yanmei Liu,Wanqi Cong,Dongmei Chang,Qixiang Fan,Fengting Cao,Tie-Gang Wang

DOI: https://doi.org/10.3390/coatings12060852

IF: 3.236

2022-06-18

Coatings

Abstract:The author and journal retract the article (The Effect of Vacuum Annealing Temperature on the Properties of AlCrTiSiN Coating Prepared by Arc Ion Plating) [...]

materials science, multidisciplinary,physics, applied, coatings & films
Mechanical Behavior of Carbon Nanotube-Reinforced Mg–Cu–Gd–Ag Bulk Metallic Glasses

Ping Zhao,Shuangshou Li,Guhui Gao,Bingzhe Bai,R. D. K. Misra

DOI: https://doi.org/10.1016/j.msea.2015.06.014

2015-01-01

Abstract:Carbon nanotube (CNT)-reinforced Mg59.5Cu22.9Gd11Ag6.6 bulk metallic glass (BMG) composites were successfully processed using the approach of differential pressure casting in copper molds. The approach allowed CNTs to maintain their tubular morphology in the glassy matrix, in spite of some reaction of CNTs with the metallic elements that led to the formation of crystalline phases. The presence of CNT in the amorphous matrix enhanced the compressive strength and fracture strain, and the compressive strength and fracture strain of composite with 3vol% CNT approached ~1007MPa and 0.42%, respectively. In composites with less than 3vol% CNT, the glass-forming ability (GFA) was similar to the undoped BMG. The study underscores that CNT reinforced Mg-based amorphous composites exhibit the potential to be the next generation engineering materials.
Retraction notice to: “Effect of electropulsing treatment on microstructure and mechanical properties of cold-rolled pure titanium strips” (Journal of Materials Processing Tech. (2015) 222 (27–32), (S0924013615000850), (10.1016/j.jmatprotec.2015.02.035))

Ye Xiaoxin,Tse Zion T.H.,Tang Guoyi,Li Xiaohui,Song Guolin

DOI: https://doi.org/10.1016/j.jmatprotec.2019.02.001

IF: 6.3

2019-01-01

Journal of Materials Processing Technology

Abstract:This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have reused figures and text that have already appeared in their previous articles. Figure 4a duplicates figure 3b of the article that had already appeared in the Journal of Alloys and Compounds 616 (2014) 173–183, http://dx.doi.org/10.1016/j.jallcom.2014.07.143, figure 5b (anticlockwise 90 degrees rotated and horizontally flipped) of the article that had appeared in Materials Characterization 98 (2014) 147–161, http://dx.doi.org/10.1016/j.matchar.2014.10.026, figure 6b of the article published by Surface & Coatings Technology 258 (2014) 467–484, http://dx.doi.org/10.1016/j.surfcoat.2014.08.052 and figure 8b (anticlockwise 90 degrees rotated and horizontally flipped) of the article published by the J. Mater. Sci.: Mater. Med. 26 (2015) 53. https://doi.org/10.1007/s10856-014-5371-5. The article also duplicates parts of the text that appeared in Materials Science & Engineering A 622 (2015) 1–6 http://dx.doi.org/10.1016/j.msea.2014.11.003. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. Journal records indicate that confirmation of the submission and publication of the article was sent to the first author's email address, in addition to an email that used the corresponding author's name (tangguoyiforwork@163.com). The corresponding author and the first author wish to mention that the co-author Zion T.H. Tse was not involved in the preparation and handling of this article. He was not informed about the publication or granted the use of his name and affiliation in the publication. © 2019 Elsevier B.V.
Retracted: Mechanical Strength and Fatigue Fracture Analysis on Al-Zn-Mg Alloy with the Influence of Creep Aging Process

Advances in Materials Science and Engineering

DOI: https://doi.org/10.1155/2023/9863267

IF: 2.0981

2023-07-13

Advances in Materials Science and Engineering

Abstract:This article has been retracted by Hindawi following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of one or more of the following indicators of systematic manipulation of the publication process: (1) Discrepancies in scope (2) Discrepancies in the description of the research reported (3) Discrepancies between the availability of data and the research described (4) Inappropriate citations (5) Incoherent, meaningless and/or irrelevant content included in the article (6) Peer-review manipulation

materials science, multidisciplinary
Retracted: Tang Sancai Cultural and Creative Product Design Based on Bi4Ti3O12 Ferroelectric Nanomaterials

Advances in Materials Science and Engineering

DOI: https://doi.org/10.1155/2023/9816852

IF: 2.0981

2023-12-30

Advances in Materials Science and Engineering

Abstract:This article has been retracted by Hindawi, as publisher, following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of systematic manipulation of the publication and peer-review process. We cannot, therefore, vouch for the reliability or integrity of this article.

materials science, multidisciplinary
RETRACTED: Shi et al. Effect of Final Rolling Temperature on Microstructures and Mechanical Properties of AZ31 Alloy Sheets Prepared by Equal Channel Angular Rolling and Continuous Bending. Materials 2020, 13, 3346

Laixin Shi,Lei Liu,Li Hu,Tao Zhou,Mingbo Yang,Yong Lian,Jin Zhang

DOI: https://doi.org/10.3390/ma17194921

IF: 3.4

2024-10-10

Materials

Abstract:The journal retracts the article, "Effect of Final Rolling Temperature on Microstructures and Mechanical Properties of AZ31 Alloy Sheets Prepared by Equal Channel Angular Rolling and Continuous Bending" [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Retraction notice to “Influence of electropulsing treatment on microstructure and mechanical properties of Ti-6Al-4V alloy strip with lamellar microstructure” [Mater. Sci. Eng. A 622 (2015) 1−6](S0921509314013422)(10.1016/j.msea.2014.11.003)

Ye Xiaoxin,Tse Zion T.H.,Tang Guoyi,Geng Yubo,Song Guolin

DOI: https://doi.org/10.1016/j.msea.2017.01.040

2017-01-01

Abstract:This article has been retracted at the request of the Editor-in-Chief. Figure 6 duplicates figure 4 of the article that had already appeared in Adv. Eng. Mater. 17 (2015) 995-1007, http://dx.doi.org/10.1002/ adem.201400273 and figure 8 of the article that had appeared in J. Mater. Res. 29 (2014) 1500-1512, http://dx.doi.org/10.1557/jmr.2014.171. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents an abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. © 2017
RETRACTED: Vorotilo et al. Manufacturing of Conductive, Wear-Resistant Nanoreinforced Cu-Ti Alloys Using Partially Oxidized Electrolytic Copper Powder. Nanomaterials 2020, 10, 1261

Stepan Vorotilo,Pavel Alexandrovich Loginov,Alexandr Yuryevich Churyumov,Alexey Sergeevich Prosviryakov,Marina Yakovlevna Bychkova,Sergey Ivanovich Rupasov,Anton Sergeevich Orekhov,Philipp Vladimirovich Kiryukhantsev-Korneev,Evgeny Alexandrovich Levashov

DOI: https://doi.org/10.3390/nano14161325

2024-08-07

Abstract:The Nanomaterials Editorial Office retracts the article, "Manufacturing of Conductive, Wear-Resistant Nanoreinforced Cu-Ti Alloys Using Partially Oxidized Electrolytic Copper Powder" [...].

Retraction:Effect of Carbon Nanotube Addition on the Compressive Fracture Characteristics of Zr-based Bulk Metallic Glass Composites

WITHDRAWN: Nanocrystallization kinetics, structure and magnetic properties of FINEMET-type ribbons with Cu substitution by Ag

Retraction Note: Enhanced tensile strength and thermal conductivity in copper diamond composites with B4C coating

RETRACTED: Nanofibrous Composite Samples Based on a Cu(I) Complex and Its Polymer Host: Synthesis, Characterization and Emissive Performance Improvement

Retracted: Evaluation of MWCNT Particles-Reinforced Magnesium Composite for Mechanical and Catalytic Applications

RETRACTED: Structural, mechanical and corrosion resistance properties of Al2O3–CeO2 nanocomposites in silica matrix on Mg alloys by a sol–gel dip coating technique

Retraction Note: Effect of Electropulsing Treatment on the Microstructure, Texture, and Mechanical Properties of Cold-Rolled Ti-6Al-4V Alloy

Retracted: A Performance of a Nanofiber Polymer in Geotechnical Engineering Support

Retraction notice to "Fabrication and characterizations of a Gadolinium doped terbium gallium garnet crystal for Faraday rotators" 112225]

RETRACTED: P-type Zno Thin Films Fabricated by Al–N Co-Doping Method at Different Substrate Temperature

RETRACTED: Mechanical properties and phase transition of biomedical titanium alloy strips with initial quasi-single phase state under high-energy electropulses

RETRACTED: Preparation and Dielectric Properties of BaTiO3/epoxy Nanocomposites for Embedded Capacitor Application

Modulating the microstructure and mechanical properties of β-Ti-reinforced bulk metallic glass composites by carbon addition

Retraction: Zhu et al. The Effect of Vacuum Annealing Temperature on the Properties of AlCrTiSiN Coating Prepared by Arc Ion Plating. Coatings 2022, 12, 316

Mechanical Behavior of Carbon Nanotube-Reinforced Mg–Cu–Gd–Ag Bulk Metallic Glasses

Retraction notice to: “Effect of electropulsing treatment on microstructure and mechanical properties of cold-rolled pure titanium strips” (Journal of Materials Processing Tech. (2015) 222 (27–32), (S0924013615000850), (10.1016/j.jmatprotec.2015.02.035))

Retracted: Mechanical Strength and Fatigue Fracture Analysis on Al-Zn-Mg Alloy with the Influence of Creep Aging Process

Retracted: Tang Sancai Cultural and Creative Product Design Based on Bi4Ti3O12 Ferroelectric Nanomaterials

RETRACTED: Shi et al. Effect of Final Rolling Temperature on Microstructures and Mechanical Properties of AZ31 Alloy Sheets Prepared by Equal Channel Angular Rolling and Continuous Bending. Materials 2020, 13, 3346

Retraction notice to “Influence of electropulsing treatment on microstructure and mechanical properties of Ti-6Al-4V alloy strip with lamellar microstructure” [Mater. Sci. Eng. A 622 (2015) 1−6](S0921509314013422)(10.1016/j.msea.2014.11.003)

RETRACTED: Vorotilo et al. Manufacturing of Conductive, Wear-Resistant Nanoreinforced Cu-Ti Alloys Using Partially Oxidized Electrolytic Copper Powder. Nanomaterials 2020, 10, 1261