Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

Robust Finite-Control-Set Model Predictive Torque Control of PMSM Drives Based on Dual Variable Bandwidth ESOs

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Robust Deadbeat Finite-Set Predictive Torque and Flux Control for PMSM with Dynamic Model

An Improved Robust Model Predictive Speed Control with Inertia Identification for PMSM Drives in the Electrohydrostatic Actuator

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Disturbance Compensation-Based Model Predictive Flux Control of SPMSM with Optimal Duty Cycle

Robustness Improvement of FCS-MPTC for Induction Machine Drives Using Disturbance Feedforward Compensation Technique

Model Predictive Direct Torque Control for PMSM Drives in M–T Frame

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

Model-Free Predictive Torque Control of PMSM Drives with Measurement Noise Suppression

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

A Simplified Robust Model Predictive Flux Control Of Open-Winding Pmsm Based On Eso

Robust Model Predictive Control for PMSM Drives Against Parameter Mismatch

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

A Low-Complexity Three-Vector-Based Model Predictive Torque Control for SPMSM

Enhanced Model Predictive Control for PMSM Based on Reference Voltage Predictive Model

Tolerant Sequential Model Predictive Direct Torque Control of Permanent Magnet Synchronous Machine Drives

Finite Control Set Model Predictive Current Control For Pmsm Based On Extended State Observer

Robust ESO Two-Degree-of-Freedom Control Design for Permanent Magnet Synchronous Motor

Robust Model Predictive Current Control With Adaptive Extended-State-Observer for Permanent Magnet Synchronous Motor