Abstract:This paper investigates an intelligent reflecting surface (IRS) enabled multiuser integrated sensing and communications (ISAC) system, which consists of one multi-antenna base station (BS), one IRS, multiple single-antenna communication users (CUs), and one target at the non-line-of-sight (NLoS) region of the BS. The IRS is deployed to not only assist the communication from the BS to the CUs, but also enable the BS's NLoS target sensing based on the echo signals from the BS-IRS-target-IRS-BS link. We consider two types of targets, namely the extended and point targets, for which the BS aims to estimate the complete target response matrix and the target direction-of-arrival (DoA) with respect to the IRS, respectively. To provide full degrees of freedom for sensing, we consider that the BS sends dedicated sensing signals in addition to the communication signals. Accordingly, we model two types of CU receivers, namely Type-I and Type-II CU receivers, which do not have and have the capability of canceling the interference from the sensing signals, respectively. Under each setup, we jointly optimize the transmit beamforming at the BS and the reflective beamforming at the IRS to minimize the Cramér-Rao bound (CRB) for target estimation, subject to the minimum signal-to-interference-plus-noise ratio (SINR) constraints at the CUs and the maximum transmit power constraint at the BS. We present efficient algorithms to solve the highly non-convex SINR-constrained CRB minimization problems, by using the techniques of alternating optimization, semi-definite relaxation, and successive convex approximation. Numerical results show that the proposed design achieves lower estimation CRB than other benchmark schemes, and the sensing signal interference cancellation at Type-II CU receivers is beneficial when the number of CUs is greater than one.

Joint Beamforming Scheme for ISAC Systems Via Robust Cramér–Rao Bound Optimization

Joint Angle and Delay Cramér-Rao Bound Optimization for ISAC

Joint Beamforming for Multi-target Detection and Multi-user Communication in ISAC Systems

Joint Transmit and Passive Beamforming Design for IRS-assisted ISAC System Based on Cramér-Rao Bound Optimization

Joint User Pairing and Beamforming Design for NOMA-Aided CFMM-ISAC Systems

Beamforming Design of Dual Intelligent Reflecting Surface Aided ISAC System Based on Cramér-Rao Bound Optimization

Joint Beamforming for CRB-Constrained IRS-Aided ISAC System Via Product Manifold Methods

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems

Joint Transmit and Receive Beamforming Design for Secure Communications in ISAC Systems with Eavesdropper and Jammer

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Joint BS Selection, User Association, and Beamforming Design for Network Integrated Sensing and Communication

Joint transmit and reflective beamforming for IRS-assisted integrated sensing and communication

Cramer-Rao Bound Optimization for Active RIS-Empowered ISAC Systems

Cramér-Rao Bound Analysis and Beamforming Design for Integrated Sensing and Communication with Extended Targets

SNR/CRB-Constrained Joint Beamforming and Reflection Designs for RIS-ISAC Systems

Information and sensing beamforming optimization for multi-user multi-target MIMO ISAC systems

Dual-Robust Integrated Sensing and Communication: Beamforming under CSI Imperfection and Location Uncertainty

Cramér-Rao Bound Minimization for IRS-Enabled Multiuser Integrated Sensing and Communications

Joint Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Joint and Robust Beamforming Framework for Integrated Sensing and Communication Systems