Abstract:This paper presents a clamping force sensor based on fiber Bragg grating (FBG) to provide interaction force feedback for laparoscopic surgery. The proposed sensor mainly consists of a force-sensitive clamping flexure and a tightly suspended optical fiber with an FBG inscribed. The force-sensitive clamping flexure utilizes a bridge-type structure with an excellent load-bearing capacity and anti-interference ability to linearly convert the vertical force or displacement input exerted on the grasping surface into translational deformation along the flexure central line. The FBG fiber is arranged along the flexure central axis to sense the vertical force-induced horizontal strain. This two-point pasting configuration can achieve a uniform fiber strain distribution and an enhanced sensitivity. This assembly arrangement produces a linear relationship between the applied vertical force and the force-induced horizontal strain value sensed by the FBG. The force sensitivity remains the constant and it less affected by the grasping positions due to the high stiffness and deformation conversion, overcoming the difficulty that the traditional clamping force sensor designs are sensitive to the grasping position due to the variable grasping positions and areas on the soft tissues during clamping. The finite element method (FEM)-based simulation has been utilized for design optimization and performance investigation to guide the sensor design. The simulation sensitivity values have been determined as a close value of 52pm/N regarding the three different grasping positions at middle, left and right parts. The optimized sensor design has been integrated into a manual surgical grasper and achieve experimental sensitivity values of 56.2pm/N, 51.1pm/N and 47.5pm/N for the three different loading positions within [0, 10N]. Both dynamic loading experiments and clamping experiments on ex-vivo tissues and in-vivo animal for tissue resection were implemented to validate the effectiveness of the proposed design.

A Multi-Function Sensing Forceps Based on Fiber Bragg Gratings for Membrane Peeling

3-DOF Force-Sensing Micro-Forceps for Robot-Assisted Membrane Peeling: Intrinsic Actuation Force Modeling.

Development of a Fiber Bragg Grating-Enabled Clamping Force Sensor Integrated on a Grasper for Laparoscopic Surgery

Surgical Forceps with Force/Position Perception Based on FBG.

Surgical Forceps with Force/Position Perception Based on FBG

Multimode Proximal Force FBG-Based Sensors With High-Resolution for Catheter Surgical Robots

FBG-based three-dimensional micro-force sensor with axial force sensitivity-enhancing and temperature compensation for micro-forceps

A High-Sensitivity Fiber Bragg Grating-Based Distal Force Sensor for Laparoscopic Surgery

A Three-Axial Force Sensor Based on Fiber Bragg Gratings for Surgical Robots

A Compact FBG-Based Triaxial Force Sensor With Parallel Helical Beams for Robotic-Assisted Surgery

Development of a Distal Tri-Axial Force Sensor for Minimally Invasive Surgical Palpation

A Force/Position Measurement Method of Surgical Forceps Based on Fiber Bragg Gratings

A Fingertip Optical Fiber Composite Sensor with Conformal Design for Robotic Perception of Tactile Force

Finger‐Skin‐Inspired Flexible Optical Sensor for Force Sensing and Slip Detection in Robotic Grasping

A Six-Axis FBG Force/Moment Sensor with Nonlinear Decoupling and Fault Tolerance for Laparoscopic Instruments

Design of a Modular 3-D Force Sensor with Fiber Bragg Gratings for Continuum Surgical Robot.

Development of Flexible Tactile Sensor for the Envelop of Curved Robotic Hand Finger in Grasping Force Sensing

An FBG-Based 3-DOF Force Sensor With Simplified Structure for Retinal Microsurgery

A Novel Fiber Bragg Grating Three-Dimensional Force Sensor for Medical Robotics

Research on End Force Measurement Method of Soft Robot Based on Fiber Bragg Grating

A Detachable FBG-Based Contact Force Sensor for Capturing Gripper-Vegetable Interactions