Impact of dead-time on resonance in doubly fed induction generator system under weak grid

Zakiud Din,Jianzhong Zhang,Zheng Xu,Yaqian Zhang,Yipeng Song
DOI: https://doi.org/10.17775/CSEEJPES.2021.00760
IF: 6.014
2022-01-01
CSEE Journal of Power and Energy Systems
Abstract:The subsynchronous resonance (SSR) and high-frequency resonance (HFR) are the two phenomena that exist in the doubly fed induction generator (DFIG) system operated in the weak grid. Besides the aforementioned resonance, the dead-time in the converter (rotor side converter (RSC) and grid side converter (GSC)) of the DFIG system can cause resonance at the middle frequencies. The aforementioned resonance at middle frequency can greatly degrade the dynamic performance and causes instabilities in the DFIG system. Nevertheless, there is not enough research available in the existing literature on resonance in the DFIG system, considering the dead-time impact. This paper proposes a new method of resonance analysis in the DFIG system taking dead-time effect into consideration utilizing a small-signal impedance modeling. The dead-time of the RSC and GSC will introduce the distorted voltage into the rotor-and stator-side of the DFIG. Then, the rotor-side impedance is modified by adding the effect of transfer function (impedance) from the distorted voltage to rotor current. Likewise, the stator-side impedance is modified by adding the effect of the transfer function (impedance) from distorted voltage to stator current. Thus, the overall DFIG system impedance, as seen from the point of common coupling is changed. Finally, the resonance is revealed by plotting the DFIG system impedance and the weak grid impedance on the Bode plot. Additionally, the resonance mitigation is exposed through the dead-time compensation (DTC) technique using an adaptive second-order bandpass filter. With the proposed technique, the resonance at middle frequency is damped with zero probability of the resonance reoccurrence. Finally, the validity and the accuracy of the proposed DTC technique are validated using the mathematical analysis and simulations in Matlab.
What problem does this paper attempt to address?