Abstract:This paper introduces an optimized DC–DC converter that employs a modified switched inductor-capacitor technique to achieve ultra-high voltage gain for renewable energy systems. The development is based on adding one cell of modified switched inductor (MSL1) with series diodes interleaved with the main switch in the proposed DC–DC converter. The (MSL1) with capacitor operates in resonant mode to reduce current stress across the main switch when the charge in capacitor becomes zero. This approach also reduces voltage stress across the main switch, all inductors, and diodes. Furthermore, modified switched inductors (MSL2) with an auxiliary switch and a coupled capacitor are incorporated to provide double boosting voltage and to achieve high voltage gain. Additionally, a main and auxiliary switch are integrated with modified switched capacitors (MSC) to provide ultra-high voltage gain and to reduce voltage stress across auxiliary switch. Moreover, the proposed converter exhibits a continuous input current with zero pulsating, even at very low duty cycles. The advantages of the proposed converter are high efficiency, low voltage stress, and low values of inductors and capacitors when utilizing a high switching frequency. A mathematical model for the proposed converter is developed for both continuous conduction mode and discontinuous conduction mode. In addition, the PCB design for the proposed converter is presented, and experimental tests are conducted to verify the simulation and laboratory results. The proposed converter aims to boost the voltage from 20 to 40 V to a variable output voltage between 200 and 400 V, delivering 400 watts of power with an efficiency of 96.2%.

A 1-MHz switched-inductor-based high-step-up converter with optimized integrated magnetics

Performance Analysis of Single Phase High Step-Up Converter with Coupled Inductor Multiplier

A DCM High-Frequency High-Step-Up SEPIC-Based Converter with Extended ZVS Range

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

A High Step Up SEPIC-Based Converter Based on Partly Interleaved Transformer

Optimized DC–DC Converter Based on New Interleaved Switched Inductor Capacitor for Verifying High Voltage Gain in Renewable Energy Applications

A High-Efficiency DC-DC Converter Based on Series/Parallel Switched Inductor Capacitors for Ultra-High Voltage Gains

A Novel DCM Soft-Switched SEPIC-Based High-Frequency Converter With High Step-Up Capacity

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

A Single-Switch High Step-Up DC–DC Converter Based on Three-Winding Coupled Inductor and Pump Capacitor Unit

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

A High-Frequency High Voltage Gain Modified SEPIC with Integrated Inductors

High Step‐Up Isolated Multi‐Input Converter Based on Three‐Winding Coupled Inductor and Quasi‐Z‐Source for Excellent Voltage Gain With Independent Control and Expandability

Interleaved Converter with Voltage Multiplier Cell for High Step-Up and High-Efficiency Conversion

Interleaved High Step-Up Converter with Winding-Cross-Coupled Inductors and Voltage Multiplier Cells

Single-Switch High Step-Up Converters with Built-In Transformer Voltage Multiplier Cell

Novel High Step-Up Soft-Switching DC–DC Converter Based on Switched Capacitor and Coupled Inductor

A 12-Level Series-Capacitor 48-1V DC–DC Converter With On-Chip Switch and GaN Hybrid Power Conversion

A Novel High Step-Up Converter with A Switched-Coupled-Inductor-Capacitor Structure for Sustainable Energy Systems

A 2-MHz 9–45-V Input High-Efficiency Three-Switch ZVS Step-Up/-Down Hybrid Converter

High Step-up/Step-down Soft-switching Bidirectional DC/DC Converter Based on GaN HEMT