Abstract:Lithium sulfur batteries attract great attention due to their high energy density, while the real applications are still hindered by the rapid capacity degradation. Despite great effort devoted to solving the polysulfide shuttle between the cathode and anode electrodes, it remains as a serious challenge to build high-stable lithium sulfur battery, which related to the diffusion and reaction between polysulfides and the metal lithium anode. We proposed a strategy of introducing an ion selective membrane to improve the stability and coulombic efficiency of lithium sulfur battery. Generally, porous polymer membrane serves as membranes in batteries to avoid the short circuit between anode and cathode electrodes, which cannot stop the shuttle effect. By the introduction of permselective functional layer, the polysulfide anions can be confined in the cathode side, which would favor the cyclic stability and lower self-discharge performance. We replace the routine membrane with an ion selective membrane, in which the sulfonate-ended perfluoroalkyl ether groups on the ionic separators are connected by pores or channels that are around several nanometers in sizes. These -SO3 -- groups coated channels allow ion hopping of positive charge species (Li+) but reject hopping of negative ions, such as polysulfide anions (Sn 2-) in this specific case due to the coulombic interactions. Consequently, this cation permselective membrane acts as an electrostatic shield for polysulfide anions, and confines the polysulfides in the cathode side. An ultra-low decay rate of 0.08% per cycle is achieved within the initial 500 cycles for membrane developed in this work, which is less than half that of the routine membranes. We also proposed a unique lithium-sulfur battery configuration with ultrathin graphene oxide (GO) membrane for high stability. The oxygen electronegative atoms modified GO into a polar plane and the carboxyl groups acted as ion hopping sites of positively charged species (Li+) while rejected the transportation of negatively charged species (Sn 2-) due to the electrostatic interactions. Such electrostatic repulsion and physical inhibition largely decreased the transference of polysulfides across the GO membrane in lithium-sulfur system. By the incorporation of permselective GO membrane, cyclic capacity decay rate is also reduced from 0.49 to 0.23 %/cycle. Such ion selective membrane is versatile for various electrodes and working conditions, which is promising for the construction of high performance batteries. References : Huang JQ, Zhang Q, Peng HJ, Liu XY, Qian WZ, Wei F, 2014. Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries. Energy & Environmental Science 2014, 7, 347. Huang JQ, Zhuang TZ, Zhang Q, Peng HJ, Chen CM, Wei F. Permselective graphene oxide membrane for high-stable and anti-self-discharge lithium-sulfur batteries. ACS Nano 2015, 9, 3002.

Back Cover: Towards Stable Lithium-Sulfur Batteries with a Low Self-Discharge Rate: Ion Diffusion Modulation and Anode Protection (chemsuschem 17/2015)

Towards Stable Lithium–Sulfur Batteries with a Low Self‐Discharge Rate: Ion Diffusion Modulation and Anode Protection

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

A Novel Laminated Separator with Multi Functions for High-Rate Dischargeable Lithium–sulfur Batteries

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

Ionic Shield for Polysulfides Toward High-Stable Lithium Sulfur Battery

High areal loading and long-life cycle stability of lithium-sulfur batteries achieved by a dual-function ZnS-modified separator

Cathode Nanostructuring and Separator Modification for High-Performance Lithium-Sulfur Batteries

A Sulfur-Limonene-Based Electrode for Lithium-Sulfur Batteries: High-Performance by Self-Protection

A lithium anode protection guided highly-stable lithium-sulfur battery.

Electrostatic-spraying an ultrathin, multifunctional and compact coating onto a cathode for a long-life and high-rate lithium-sulfur battery

Ultra-small Self-Discharge and Stable Lithium-Sulfur Batteries Achieved by Synergetic Effects of Multicomponent Sandwich-Type Composite Interlayer

Inhibiting polysulfide shuttling with a flexible "skin" for highly stable Lithium-Sulfur batteries

Synergistic Cation–Anion Regulation of Polysulfides by Zwitterionic Polymer Binder for Lithium–Sulfur Batteries

Improved Lithium–sulfur Batteries with a Conductive Coating on the Separator to Prevent the Accumulation of Inactive S-related Species at the Cathode–separator Interface

Inhibiting polysulfides diffusion of lithium-sulfur batteries using an acetylene black-CoS2 modified separator: Mechanism research and performance improvement

Promoting Reversible Redox Kinetics by Separator Architectures Based on CoS 2 /HPGC Interlayer as Efficient Polysulfide‐Trapping Shield for Li–S Batteries

Lithium-Anode Protection in Lithium–Sulfur Batteries

Study on Lithium-Sulfur Batteries

Synergetic effect of block and catalysis on polysulfides by functionalized bilayer modification on the separator for lithium-sulfur batteries

Synergetic Protective Effect of the Ultralight MWCNTs/NCQDs Modified Separator for Highly Stable Lithium–Sulfur Batteries