Abstract:The attached old mortar on the surface of recycled concrete aggregate (RCA) can result in the introduction of sulfate-corrosive substances into the matrix when the parent concrete is exposed to an external sulfate attack. As a result, the presence of corroded RCA (i.e., CRCA) in new recycled aggregate concrete (RAC) could adversely affect its mechanical and durability properties. The interface transition zone (ITZ), which is recognized as the weakest region in concrete, especially in RAC where multiple weak ITZs exist, can act as a pathway for the migration of corrosive substances (in the form of sulfate ions). To address this issue, this study proposes the use of an interfacial coating comprising a cement@silica fume slurry on the CRCA surface (i.e., Slurry@CRCA) to mitigate the migration of sulfate ions into the cement matrix and optimize the ITZ in concrete. Experimental findings demonstrate that the Slurry@CRCA can effectively enhance the ITZ, enabling the concrete containing slurry-coated CRCA (i.e., C-Slurry@CRCA) to exhibit the lowest sulfate ions migration distance of approximately 10 mm and a total sulfate ions migration content of 0.25% among all RAC samples. Furthermore, the incorporation of Slurry@CRCA in concrete leads to significant improvements in mechanical strengths and water sorptivity. These improvements bring the performance of the C-Slurry@CRCA samples to a level comparable to that of C-RCA specimens, ensuring that they meet the necessary criteria for practical applications. The findings of this study highlight the effectiveness of using Slurry@CRCA in reducing the migration of sulfate ions into the cement matrix and optimizing the ITZ. As a result, the utilization efficiency of RCA is increased, offering a novel and sustainable approach for the development of RAC in sustainable and resilient infrastructure.

Efficient Inhibition of ASR by Microbially Induced Calcium Carbonate Precipitation on Aggregates at a Low Degree of Saturation

Optimizing Microbial- and Enzyme-Induced Carbonate Precipitation Treatment Regimes to Improve the Performance of Recycled Aggregate Concrete

Enhancement Strategies for Recycled Brick Aggregate Concrete Using MICP and EICP Treatments

Mitigating alkali-silica reaction through metakaolin-based internal conditioning: New insights into property evolution and mitigation mechanism

Calcium nitrate effectively mitigates alkali–silica reaction by surface passivation of reactive aggregates

Influence of enforced carbonation on alkali-silica reaction: performance and multi-scale mechanisms

A Substitute for Portland Cement: Experiments on Ecofriendly Reinforcement of Large-Scale Calcareous Sand by Microbial-Induced Carbonate Precipitation Spraying Method

Suppressing of alkaline aggregate reaction (AAR) through waterproofing of concrete surface, aggregates, and mortars

Alkali-silica reaction (ASR) in carbonate rocks

Expansion and Mitigation of Alkali-Silica Reaction in Binary Blended Concrete Confining Potentially Reactive Aggregates

Prospective of sugarcane bagasse ash for controlling the alkali‐silica reaction in concrete incorporating reactive aggregates

Alkali Release from Aggregates in Long-Service Concrete Structures: Laboratory Test Evaluation and ASR Prediction

Assessment of Various Mitigation Strategies of Alkali-Silica Reactions in Concrete Using Accelerated Mortar Test

Alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR) in activated blast furnace slag cement (ABFSC) concrete

Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete

Mitigating sulfate ions migration in concrete: A targeted approach to address recycled concrete Aggregate's impact

Alkali-silica reaction (ASR) in the alkali-activated cement (AAC) system: A state-of-the-art review

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Factors Affecting Kinetics and Gel Composition of Alkali–Silica Reaction in Alkali-Activated Slag Mortars

The effect of meta-halloysite on alkali–aggregate reaction in concrete

Potential of Alkali-Silica Reactivity of Unexplored Local Aggregates as per ASTM C1260