Abstract:Electrospinning is an effective method to prepare polyvinylidene fluoride (PVDF) piezoelectric fibers with a high-percentage β phase. However, as an energy conversion material for micro- and nanoscale diameters, PVDF fibers have not been widely used due to their disordered arrangement prepared by traditional electrospinning. Here, we designed a near-field electro-spinning (NFES) system driven by a triboelectric nanogenerator (TENG) to prepare PVDF fibers. The effects of five important parameters (PVDF concentration, needle inner diameter, TENG pulse DC voltage (TPD-voltage), flow rate, and drum speed) on the β phase fraction of PVDF fiber were optimized one by one. The results showed that the electrospun PVDF fibers had uniform diameter and controllable parallel arrangement. The β phase content of the optimized PVDF fiber reached 91.87 ± 0.61%. For the bending test of a single PVDF fiber piezoelectric device, when the strain is 0.098%, the electric energy of the single PVDF fiber device of NFES reaches 7.74 pJ and the energy conversion efficiency reaches 13.5%, which is comparable to the fibers prepared by the commercial power-driven NFES system. In 0.5 Hz, the best matching load resistance of a PVDF single fiber device is 10.6 MΩ, the voltage is 6.1 mV, and the maximum power is 3.52 pW. Considering that TENG can harvest micromechanical energy in the low frequency environment, the application scenario of the NFES system can be extended to the wild or remote mountainous areas without traditional high-voltage power supply. Therefore, the electrospun PVDF fibers in this system will have potential applications in high-precision 3D fabrication, self-powered sensors, and flexible wearable electronic products.

Electrical Power Generation from Randomly-Oriented Electrospun Nanofibrous Nonwoven

Power Generation from Randomly Oriented Electrospun Nanofiber Membranes

Enhanced Mechanical Energy Harvesting Using Needleless Electrospun Poly(vinylidene Fluoride) Nanofibre Webs

Preparation Of Nanofibrous Pvdf Membrane By Solution Blow Spinning For Mechanical Energy Harvesting

An Energy Harvesting Device Based on Mechano Electrospun Aligned Poly (vinylidene fluoride) Fiber Arrays

Advancements in Flexible Nanogenerators: Polyvinylidene Fluoride-Based Nanofiber Utilizing Electrospinning

Robust Mechanical-to-Electrical Energy Conversion from Short-Distance Electrospun Poly(vinylidene Fluoride) Fiber Webs.

High-output Acoustoelectric Power Generators from Poly(vinylidenefluoride-Co-trifluoroethylene) Electrospun Nano-Nonwovens

Triboelectric Nanogenerator-Based Near-Field Electrospinning System for Optimizing PVDF Fibers with High Piezoelectric Performance

Shoepad Nanogenerator Based on Electrospun PVDF Nanofibers

Effect of Electrospinning Parameters and Polymer Concentrations on Mechanical-to-electrical Energy Conversion of Randomly-Oriented Electrospun Poly(vinylidene Fluoride) Nanofiber Mats

A Flexible Piezoelectric Nanogenerator Based on Aligned P(VDF-TrFE) Nanofibers

Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites

Core-sheath PVDF Hollow Porous Fibers Via Coaxial Wet Spinning for Energy Harvesting

All-electrospun Flexible Triboelectric Nanogenerator Based on Metallic MXene Nanosheets

A Piezoelectric Generator Based on PVDF/GO Nanofiber Membrane

Piezoelectric Nanogenerator Based on Electrospinning PVDF/Cellulose Acetate Composite Membranes for Energy Harvesting

Flexible PVDF/nylon-11 electrospun fibrous membranes with aligned ZnO nanowires as potential triboelectric nanogenerators

High-performance Triboelectric Nanogenerator Based on Electrospun PVDF-graphene Nanosheet Composite Nanofibers for Energy Harvesting

Recent progress on flexible poly(vinylidene fluoride)-based piezoelectric nanogenerators for energy harvesting and self-powered electronic applications

Direct generation of electrospun branched nanofibers for energy harvesting