Numerical Modeling of Injection and Mineral Trapping of CO2 with H2S and SO2 in a Sandstone Formation

Tianfu Xu,John A. Apps,Karsten Pruess,Hajime Yamamoto

2008-01-01

Abstract:Numerical Modeling of Injection and Mineral Trapping of CO 2 with H 2 S and SO 2 in a Sandstone Formation Tianfu Xu 1 , John A. Apps 1 , Karsten Pruess 1 , and Hajime Yamamoto 2 Earth Sciences Division, Lawrence Berkeley National Laboratory, University of California, Berkeley, CA 94720, USA Civil Engineering Research Institute, Taisei Corporation, 344-1, Nase-cho, Totsuka-ku, Yokohama 245-0051, Japan Abstract. Carbon dioxide (CO 2 ) injection into deep geologic formations could decrease the atmospheric accumulation of this gas from anthropogenic sources. Furthermore, by co-injecting H 2 S or SO 2 , the products respectively of coal gasification or combustion, with captured CO 2 , problems associated with surface disposal would be mitigated. We developed models that simulate the co-injection of H 2 S or SO 2 with CO 2 into an arkose formation at a depth of about 2 km and 75 ° C. The hydrogeology and mineralogy of the injected formation are typical of those encountered in Gulf Coast aquifers of the United States. Six numerical simulations of a simplified 1-D radial region surrounding the injection well were performed. The injection of CO 2 alone or co-injection with SO 2 or H 2 S results in a concentrically zoned distribution of secondary minerals surrounding a leached and acidified region adjacent to the injection well. Co-injection of SO 2 with CO 2 results in a larger and more strongly acidified zone, and alteration differs substantially from that caused by the co-injection of H 2 S or injection of CO 2 alone. Precipitation of carbonates occurs within a higher pH (pH > 5) peripheral zone. Significant quantities of CO 2 are sequestered by ankerite, dawsonite, and lesser siderite. The CO 2 mineral-trapping capacity of the formation can attain 40-50 kg/m 3 medium for the selected arkose. In contrast, secondary sulfates precipitate at lower pH (pH < 5) within the acidified zone. Most of the injected SO 2 is transformed and immobilized through alunite precipitation with lesser amounts of anhydrite and minor quantities of pyrite. The dissolved CO 2 increases with time (enhanced solubility trapping). The mineral alteration induced by injection of CO 2 with either SO 2 or H 2 S leads to corresponding changes in porosity.