Abstract:Due to the blockage effects in the flow, hydrodynamic performances of a ship in confined waterways are significantly different from those in deep waters. In particular, the hydrodynamic interactions between ship hull and sea bottom or bank wall in the vicinity tend to be more complicated. This gives rise to notable increases in hydrodynamic forces on the hull, along with more pronounced dynamic sinkage and trim where the ship squat phenomenon occurs. The predictions of hydrodynamic forces and ship squat are of great importance from the safe navigation point of view and are also challenging because of the remarkable viscous effects and flow separations in confined waters. In this paper, an unsteady Reynolds-Averaged Navier Stokes (URANS) solver is applied to simulate the viscous flows around a tanker and a container ship in a confined canal, which is characterized by both shallow sea bottom and close side bank. In each case, the ship is moving along a straight course. The free surface elevation caused by the ship motion is captured by the Volume of Fluid method. In all simulations, the ship position during the motion is updated at each time step according to the computed hydrodynamic forces acting on the hull, from which the dynamic sinkage and trim of the ship is determined. A grid dependency study is performed so as to estimate the numerical error resulted from the grid discretization. The influences of water depth, ship-to-bank distance, ship speed and ship hull form on the hydrodynamic forces and squat of the ship are investigated through systematic computations. Numerical results are evaluated in combination with available experimental data. For the squat, additional data from a mathematical model are used for comparison. The hydrodynamic performances of the ships are generally in good agreement with the data. Furthermore, the mechanisms of the shallow water effects and bank effects involved in the confined waters are analyzed from the simulated flow field around the hulls.

A Practical Method for Predicting Sinkage and Trim

Practical Estimation of Sinkage and Trim for Common Generic Monohull Ships

Sinkage, Trim, Drag Of A Common Freely Floating Monohull Ship

Practical evaluation of sinkage and trim effects on the drag of a common generic freely floating monohull ship

A practical method for evaluating steady flow about a ship

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Calculation of Ship Sinkage, Trim and Wave Drag Using High-Order Rankine Source Method

Research on Hull Form Design and Numerical Simulation of Sinkage and Trim for a New Shallow-Water Seismic Survey Vessel

Numerical Predictions of Ship-To-Ship Interaction in Shallow Water

Numerical Predictions of Hydrodynamic Forces and Squat of Ships in Confined Waters

Numerical Investigation on a High-Speed Transom Stern Ship Advancing in Shallow Water

Hydrodynamic Prediction of Ship Including Heave and Trim

The Rise of Water at A Ship Stem

Practical Hydrodynamic Optimization of a Trimaran

Thin-ship Theory and Influence of Rake and Flare

A Fast Algorithm for the Prediction of Ship-Bank Interaction in Shallow Water

Unsteady ship–bank interaction: a comparison between experimental and computational predictions

CFD Prediction of Ship Seakeeping and Slamming Behaviors of a Trimaran in Oblique Regular Waves

Computational Fluid Dynamics Prediction of Hydrodynamic Forces on a Manoeuvring Ship Including Effects of Dynamic Sinkage and Trim

Practical Steady-Ship-flow Evaluation for Hull-Form Optimization

The Effect of Trimming and Sinkage on the Trimaran Resistance Calculation