Abstract:Tiltrotor aircraft combine the vertical take-off and landing capability of a helicopter with the high cruising speed of a fixed-wing airplane. During flight, the aircraft switches between helicopter and airplane modes. Meanwhile, structural vibration and deformation are affected by changes in the aerodynamic loads, collective pitch, and rotation speed of blades. Therefore, it is crucial to consider dynamic characteristics in different modes. This paper presents a surrogate-based structural design framework of a tiltrotor blade to speed up calculations while maintaining accuracy. The shape generation method, rapid finite element method (FEM) model generation, and simplified boundary conditions are implemented to compute the blade modal frequencies, mass and inertia. A B-spline is used to construct the shape of the blade with the distribution of airfoils, twist angles, chord length, swept angles, and dihedral angles. These geometric features are realized by approximation, rotation, translation, and scaling of the control points. The spanwise distribution of the C-beam area and the width and length of the skins are selected to parameterize and establish the FEM model. The blind kriging model is applied to develop a surrogate model. The precision of this surrogate model is evaluated and compared to the kriging model and backpropagation neural network (BPNN) model based on the blade of an eight-ton-weight aircraft. A blade with a linear spanwise distribution of the C-beam area is designed using these three surrogate models trained by 13 samples. The results reveal that the error of the blind kriging model concerning the first four modal frequencies is less than 0.5% and lower than that of the other two models. A gimbal hub is modeled using a combination of a simply supported and a clamped boundary condition at the root. The two boundary conditions and two working conditions are unified into one working condition since a linear relationship is found. Moreover, the effects of the segmented linearly distributed cross-sectional area of the C-beam and the geometric parameters of the skins are investigated. The tip and root of the C-beam have the most significant influence on the low-order modal frequency. The parameters of the skins have opposite effects on the 1st and 2nd flap frequencies and the 1st torsion frequency. This framework provides a complete design process on the basis of geometric features and design parameters in the structure design, reducing the design variables. The use of the surrogate model and simplified working conditions reduce the consumption of time in the design. Conclusions about the tiltrotor blade have reference significance in the design stage.

Material Selection in Helicopter Composite Rotor Blade Structure Design

Development of Mach Scale Rotors with Tailored Composite Coupling for Vibration Reduction

Design and Hover Test of Low Vibration Mach Scale Rotor with Twisted Composite Tailored Blade

Material Selection Using Hybrid Grey Relation Analysis Approach Based on Weighted Entropy for Ranking: The Case of Helicopter Rotor Blade

Aeroelastic analysis and structural parametric design of composite rotor blade

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Finite Element Analysis for Composite Blade Structure of Large Wind Turbine

Effective Static and Dynamic Finite Element Modeling of a Double Swept Composite Rotor Blade

Vibrational Study of a Helicopter Tail Rotor Blade with Different Polymer Inner Core Materials

Dynamic Modeling of Helicopter Rotor Blades

Multiscale Strength Analysis of a Composite Rotor on the High-Speed Motor

From aviation to automotive - a study on material selection and its implication on cost and weight efficient structural composite and sandwich designs

Surrogate Model-Based Parametric Structural Design of a Composite Tiltrotor Blade

Structural Optimization and Influence Factors on Reliability for Composite Wind Turbine Blade

Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade

Materials for Wind Turbine Blades: An Overview

Structural design of the composite blades for a marine ducted propeller based on a two-way fluid-structure interaction method

Advances in resin matrix composite fan blades for aircraft engines: A review

DESIGN AND ANALYSIS OF COMPOSITE PROPELLER BLADE FOR AIRCRAFT

In-Depth Study on the Application of a Graphene Platelet-reinforced Composite to Wind Turbine Blades

Exploratory Study on the Application of Graphene Platelet-Reinforced Composite to Wind Turbine Blade