Abstract:To evaluate the fire-resistance of large space buildings, smoke temperature distribution in large space fires is one of the required conditions for determining the temperature elevation history in structures. However, full scale fire experiments on large space building in State Key Laboratory of Fire Science in China revealed that the fire temperature distribution in large space fires are different with that in small compartment fires. In order to standardize the hot smoke temperature in localized fire, a number of ventilated fire scenarios are designed with ceiling height ranging 4–20m high, floor area ranging 500–6000m2 and the rate of heat release ranging 2–25MW. A wide range of result from a series of large space fire scenarios simulated by FDS (Fire Dynamics Simulator), revealed three important facts. Firstly, temperature distributions throughout the large space fire are non-uniform and pole asymmetric from the fire source. Secondly, the key factors i.e. fire growth type, heat release rate, dimension of internal space and fire area have significant influence on the temperature distribution. Thirdly, with the increase of heat release rate, the maximum temperature is higher and with the increase of the floor area or the internal space height, the maximum temperature is lower. The temperature decays from the plume centerline in horizontal plane. Finally, a new parameter equation that represents the non-uniform fire temperature distribution as a function of time and key factors has been developed by parametric analysis method based on results from numerical tests by using FDS. The new parameter equation agrees well with the numerical test and can be used as the temperature boundary conditions for the lumped differential formulation, from which the transient temperature in elements can be derived. In the meantime this equation can be available for global structural analysis exposed to localized fires.

FDS Simulation of Temperature Elevation of Steel Members Exposed to Large Space Fire

Using adiabatic surface temperature for thermal calculation of steel members exposed to localized fires

INTEGRATED FIRE-STRUCTURE SIMULATION OF A LOCALZIED FIRE TEST ON A CEILING STEEL BEAM1Q

Simplified Algorithm of Steel Member at Elevated Temperature in Large Space Fire Based on Field Model

Numerical Study on Temperature Distribution of Structural Components Exposed to Travelling Fire

Fire Radiation Effect on Steel Member at Elevated Temperature in Large Space Fire

Thermal Response of Steel Columns Exposed to Localized Fires-Numerical Simulation and Comparison with Experimental Results

Fire Dynamic Simulation on Thermal Actions in Localized Fires in Large Enclosure

Numerical Simulation Analysis on Temperature Field for Large-space Structures under Fire

Finite Element Analysis Of Temperatures In Concrete Filled Double Skin Steel Tubes Exposed To Fires

COMPUTATIONAL METHOD AND NUMERICAL SIMULATION OF TEMPERATURE FIELD FOR LARGE-SPACE STEEL STRUCTURES IN FIRE

Finite Element Analysis of Fire Behavior of Steel Beam under Different Elevated Temperature Conditions

A New Temperature–time Curve for Fire-Resistance Analysis of Structures

Assessment of Fire Dynamics Simulator for Heat Flux and Flame Heights Predictions from Fires in SBI Tests

Influence of Flame Radiation on Temperature Rising of Steel Members in Large Space Fire

The lateral impact performance of concrete-filled steel tubular (CFST) members at high temperatures

Temperature distribution in concrete-filled steel tubes with square cross-sections under two-side fire

FDS simulation and fire characters analysis of typical subway stations

Analyses the parameters of fire temperature elevation at the top of large space buildings

Simplified Model for Fire Behavior in Large Space Steel Structures

Finite Element Analysis On The Temperature Field Of Steel-Concrete Composite Joints Under Fire