Abstract:Abstract A technique is developed to quantify the ultra-trace 231 Pa (35–3904 ag) concentration in seawater using multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). The method is a modification of the process developed by Shen et al. (Anal Chem 75(5):1075–1079, 2003. https://doi.org/10.1021/ac026247r ) and extends it to the application of very low levels of actinides, and the 35 ag 231 Pa can be measured with a precision of 15%. The total process blank for the water column was 0.02 ag/g, while the values of the large and small particles were ~ 30 ag/g. The ionization efficiency (ions generated/atom loaded) varies from 0.7 to 2.4%. The measurement time is 2–5 min. The amount of 231 Pa needed to produce 231 Pa data with an uncertainty of ± 0.8–15% is 35–3904 ag (~ 0.9 × 10 5 to 10 × 10 6 atoms). Replicate measurements of known standards and seawater samples demonstrate that the analytical precision approximates that expected from counting statistics, and that based on detection limits of 52 ag, 55 ag, and 28 ag, protactinium can be detected in a minimum seawater sample size of ~ 2.6 L for small suspended particulate matter (> 0.8 μm and 51 μm), and ~ 56 mL for filtered (< 0.45 μm) seawater. The concentration of 231 Pa (several attograms per liter) can be determined with an uncertainty of ± 2–8% (2 σ ) for suspended particulate matter filtered from ~ 60 L of seawater. For the dissolved fraction, ~ 1 L of seawater yields 231 Pa measurements with a precision of 0.8–10%. The sample size requirements are several orders of magnitude less than traditional decay-counting techniques, and the precision is better than that previously reported for ICP-MS techniques. Our technique can also be applied to other environmental samples, including river, lake, and cave water samples.

STEPWISE SEPARATION AND DETERMINATION OF (231)~pa ISOTOPES OF U AND Th IN MARINE SAMPLES

Determination of Picogram-per-Gram Concentrations of 231pa and 230th in Sediments by Melt Quenching and Laser Ablation Mass Spectrometry

Improvements in the determination of attogram-sized 231Pa in dissolved and particulate fractions of seawater via multi-collector inductively coupled plasma mass spectrometry

Rapid Method To Determine 137 Cs, 237 Np, and Pu Isotopes in Seawater by SF-ICP-MS

Simultaneous determination of femtogram levels of 237Np, 239Pu, and 240Pu in environmental solid samples using extraction chromatography and ICP-MS/MS

Rapid Method to Determine 137cs, 237np, and Pu Isotopes in Seawater by SF-ICP-MS.

Determination of Plutonium Isotopes (Pu-238, Pu-239, Pu-240, Pu-241) in Environmental Samples Using Radiochemical Separation Combined with Radiometric and Mass Spectrometric Measurements

Comparison for the simultaneous determination of 237Np and Pu isotopes between TEVA and TK200 resin

Determination of uranium isotopes in marine sediments and seawaters by SF ICP-MS after rapid chemical separation using TK200 resin

Determination of Plutonium Isotopes (238pu, 239pu, 240pu, 241pu) in Environmental Samples Using Radiochemical Separation Combined with Radiometric and Mass Spectrometric Measurements

Co-precipitation approach to measure amount of $^{238}$U in copper to sub-ppt level using ICP-MS

Coupled analysis of seawater and sedimentary 231Pa/230Th in the tropical Atlantic

Rapid determination of plutonium isotopes in small samples using single anion exchange separation and ICP-MS/MS measurement in NH3–He mode for sediment dating

A new procedure for separating thallium from geological materials prior to stable isotope ratio determination by MC–ICP–MS

Determination of Pu isotope concentrations and isotope ratio by inductively coupled plasma mass spectrometry: a review of analytical methodology

Determination of Pu Isotopes in Sediment and Soil Samples by SF-ICP-MS: an Improved Anion-Exchange Procedure for Pu Separation

Simultaneous Separation of Protactinium-230 and Uranium-230 Isotopes from a Proton-Irradiated Thorium Matrix

Separation of Protactinium Employing Sulfur-Based Extraction Chromatographic Resins

Study of the Chemical Recovery and Selectivity against U in the Radiochemical Separation of Th with Tri-n-butyl Phosphate by Varying the Proportion of Xylene and HCl Concentration

Rapid Method for Sequential Determination of Pu and Am in Soil and Sediment Samples by Sector-Field Inductively Coupled Plasma Mass Spectrometry

Separation Method of Rb-Sr, Sm-Nd Using DCTA and HIBA