Abstract:The usage of low-grade ferrous scrap has increased over decades to decrease CO2 emissions and to produce steel products at a low cost. A serious problem in melting post-consumer scrap material is the accumulation of tramp elements, e.g., Cu and Sn, in the liquid steel. These tramp elements are difficult to remove during conventional steelmaking processes. Sn is considered as one of the most harmful tramp elements because, together with Cu, it sometimes induces the liquid metal embrittlement in high-temperature ferrous processing, e.g., continuous casting and hot rolling. Furthermore, the chemical interaction between Fe and Sn plays an important role in the Sn smelting process. The raw material used in the Sn smelting process is SnO2 (cassiterite), in which Fe3O4 is a gangue in the Sn ore. In the process, the reduction of Fe3O4 is unavoidable, which results in forming a Fe-Sn alloy (hardhead). The recirculation of the hardhead decreases the furnace capacity and increases the energy consumption in the smelting. The need to efficiently recover Sn from secondary resources is therefore inevitable. The CALculation of PHAse Diagrams (CALPHAD) approach helps to predict the equilibrium state of the multicomponent system. Previously reported studies of the Fe-Sn system show inconsistencies in the calculations and the experimental results. Mainly the miscibility gap in the liquid phase was under debate, as experimental data of the phase boundary are scattered. Experimental study and re-optimization of model parameters were carried out with emphasis on the correct shape of the miscibility gap. Three different experimental techniques were employed: differential scanning calorimetry, electromagnetic levitation, and contact angle measurement. The present thermodynamic model has higher accuracy in predicting the solubility of Sn in the body-centered cubic (bcc), compared to previous assessments. This is achieved by re-evaluating the Gibbs energies of the FeSn and FeSn2 compounds and the peritectic reaction related to Fe5Sn3. Also, the inconsistencies related to the miscibility gap around XSn = 0.31-0.81 were resolved. The database developed in the present study can contribute to the development of a large CALPHAD database containing tramp elements.

Diffusivities and Atomic Mobilities in Sn–Ag–In and Sn–Ag–Sb Melts

Assessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum System

Diffusivity of Liquid Mixture Confined in Silicate Pore by Molecular Dynamic Simulation

Diffusion mobilities for the B2-b.c.c. phase in the Ni–Al binary system

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Benchmarking the Diffusion and Viscosity of H-He Mixtures in Warm Dense Matter Regime by Quantum Molecular Dynamics Simulations

A computational study of diffusion in a glass-forming metallic liquid

Interdiffusion and atomic mobility of the Mg-Ag-Zn system

Interdiffusion and atomic mobility in FCC Ag–Cu–Ni alloys

Measurement of Diffusion Coefficients and Assessment of Atomic Mobilities in HCP Mg-Ag-Sn Alloys

The viscosity re-assessment of the Cu–X (X = Ag, Al, Sn, Mg) and Ag–X (X = Sn, Sb, In, Au) liquid alloys

Development of atomic mobility with quantified uncertainties directly from concentration profiles: a demo in fcc Cu–Ni–Sn system

A practical coarse-grained formula for classical mobility of interstitial helium diffusion in BCC W and Fe

Diffusivity and atomic mobility in fcc Cu–Mn–Si alloys: measurements and modeling by CALTPP program

A modified formula for non-Arrhenius diffusion of helium in metals

Interdiffusion In Liquid Al-Cu And Ni-Cu Alloys

A Molecular Dynamics Examination Of The Relationship Between Self-Diffusion And Viscosity In Liquid Metals

Langmuir-like model of dilute impurities in concentrated solid solutions

Sluggish and Chemically-Biased Interstitial Diffusion in Concentrated Solid Solution Alloys: Mechanisms and Methods

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Thermodynamic modeling of the Fe-Sn system including an experimental re-assessment of the liquid miscibility gap