Advantages of calculating shear-wave velocity from surface waves with higher modes
Jianghai Xia,Richard D. Miller,Choon B. Park
DOI: https://doi.org/10.1190/1.1815633
2000-01-01
SEG Technical Program Expanded Abstracts
Abstract:Summary The Rayleigh-wave phase velocity of a layered earth model is a function of frequency and four groups of earth parameters: com- pressional (P)-wave velocity, shear (S)-wave velocity, density, and thickness of layers. For the fundamental mode of Rayleigh waves, analysis of the Jacobian matrix for high frequencies (5-40 Hz) provides a measure of dispersion curve sensitivity to earth model parameters. S-wave velocities are the dominant influence of the four earth model parameters. With the lack of sensitivity of the Rayleigh wave to P-wave velocities and densities, estimations of these parameters can be made for a layered earth model such that dispersive data vary predominantly with S-wave velocities (Xia et al., 1999a). This thesis is valid for higher modes of Rayleigh waves as well. Experimental analysis indicates that energy of higher modes tends to become more dominant as the source distance becomes larger (Park et al., 1999a). In some cases, higher mode data are necessary since shorter wavelength components of fundamental mode Rayleigh waves are obscured by these higher frequency data where higher modes of Rayleigh waves dominate. As well, our modeling results demonstrate at least two quite exciting higher mode properties. First, for funda- mental and higher mode Rayleigh wave data with the same wavelength, higher modes can "see" deeper (longer than the wave- length) than fundamental modes (normally shorter than the wavelength). Second, higher mode data can increase the resolution of the inverted S-wave velocities. A much better S-wave velocity picture can be produced from inversion of surface wave data if higher-mode data are included. Real world examples show how resolution can be improved.