Abstract:A popular application of propellant containing of aluminum powder is as fuel for solid rocket motors (SRMs). The combustion gas contains large amounts of alumina particles, which will worsen the SRM thermal protection system by inducing severe mechanical erosion on the surface of the insulation material exposed directly to the high-temperature and high-velocity gas and solid two-phase flow. To protect the structures of SRMs from being damaged, a thermal protection system is required, and it must be optimally designed to be as thin as possible, but thick enough to survive the SRM operating time. To optimize the thickness of insulation material, the particle erosion model should be set up. But most existing particle erosion models are the empirical expressions obtained by experiment or direct reference to pipeline particle erosion models, which limit the application of the model. The ablation process and the flow are coupled with one another. So, to optimize thickness, numerical calculation of dynamic ablation of the insulation material in SRMs should be carried out. In this work, the ethylene propylene diene monomer (EPDM) ablative composite used as heat shield was analyzed. The physical, chemical, and mechanical processes of ablation were expounded. Models for insulation thermal decomposition and thermochemical ablation were constructed, in which pyrolysis and carbonization temperature, pyrolysis rate, latent heat and pyrolysis products, and the main reaction chemical equation of the thermal chemical ablation were researched and confirmed. The coupling of physics, chemistry, and mechanics is through the charring layer in the process of ablation of the insulation material. The charring layer was treated as a porous medium. The ablation models and its numerical method were applied to calculate the ablation of insulation material in an experimental SRM. The computed result is in good agreement with that of the experiment, which shows that the model and numerical method have good accuracy. (C) 2014 American Society of Civil Engineers.

Thermal Investigation for Solid Rocket Motor Nozzle Inserts Material

Experimental Investigation on Throat Insert'S Thermal Shock Resistance Using C/C Composite in Solid Rocket Motor

The Measurement and Analysis of Temperature Field in a Solid Motor Nozzle Throat Insert

New Method to Determine the Velocities of Particles on a Solid Propellant Surface in a Solid Rocket Motor

Coupled Fluid, Thermal and Structural Analysis of Nozzle Inserts in Solid Rocket Motors

The numerical research for heat transfer of liquid-solid coupling on SRM nozzle throat

Subscale Test Method for Thermal Shock Resistance of Throat Insert Material

Dynamic Simulation of Insulation Material Ablation Process in Solid Propellant Rocket Motor

Particle Velocity on Solid-Propellant Surface Using X-Ray Real-Time Radiography

Experimental Method Research on Ablation Characteristic of Insulation Material under High Temperature Alumina Droplet Deposition Condition

Particle tracking in combustion chamber of solid rocket motor

Temperature Field and Thermal Stress Analysis of Rocket Engine Composite Structure Nozzles

Thermal stress analyses of liquid propellant thruster chamber wall with milled slots

Numerical prediction of the two-phase flow and radiation effects on the thermal environment and ablation of solid rocket nozzle

Heat protection design of solid rocket motor nozzle

Simulated Experiment on Case Overheating Failure of Solid Rocket Motor under Flight Overload Condition

Simulation and Application of a New Multiphase Flow Ablation Test System for Thermal Protection Materials Based on Liquid Rocket Engine

Thermal Stress Analysis for Carbon/Carbon Material Throat Lining Based on Finite Element Analysis

Effect of combustion gas mass flow rate on carbon/carbon composite nozzle ablation in a solid rocket motor

Numerical simulation for fluid-solid thermal coupling of fuel-rich pasty propellant in combustion spray head of ramjet

Modeling and Analysis of Fluid-Solid Coupling Heat Transfer and Fluid Flow in Transonic Nozzle